journal article·2025-01Open access

Direct observation of Schottky-vacancy clusters and their mechanical response in MoN/TiN superlattice

Zhuo Chen, Yong Huang, Zecui Gao, Yonghui Zheng, Paul H. Mayrhofer, Zaoli Zhang

Acta Materialia· Volume 283

Abstract

A deeper understanding of vacancy-induced effects in ceramics may lead to optimized material design and improved mechanical properties. However, current research primarily focuses on the impact of vacancies on the intrinsic mechanical properties of materials, lacking direct experimental validation of their mechanical response behavior. In this study, we closely investigate the influence of Schottky-vacancy defects introduced during the deposition process on the mechanical behavior of MoN/TiN superlattice . In the as-deposited coating, Schottky vacancies are found to be distributed inside MoN as clusters. By coupling FIB with cross-sectional TEM observation, we further reveal Schottky vacancies evolution under loads at the atomic level and their significant impact on superlattice deformation. These Schottky vacancies promote superlattice intermixing and weaken the interface-strengthening effect. However, they are also beneficial to dislocation nucleation and increase the nitride plastic deformability . These findings provide a new perspective on the impact of point defects on the mechanical properties of ceramic materials.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: MXene and MAX Phase Materials · Metal and Thin Film Mechanics · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Ab initio supported development of TiN/MoN superlattice thin films with improved hardness and toughness10.1016/j.actamat.2022.117871 ↗
2. Adaptive hard and tough mechanical response in single-crystal B1 VNx ceramics via control of anion vacancies10.1016/j.actamat.2020.03.037 ↗
3. Toughness enhancement in TiN/WN superlattice thin films10.1016/j.actamat.2019.04.028 ↗
4. The impact of nitrogen content and vacancies on structure and mechanical properties of Mo–N thin films10.1063/1.4966664 ↗
5. Point defects stabilise cubic Mo-N and Ta-N10.1088/0022-3727/49/37/375303 ↗
6. Growth, nanostructure, and optical properties of epitaxial VNx/MgO(001) (0.80 ≤ x ≤ 1.00) layers deposited by reactive magnetron sputtering10.1039/C6TC02289H ↗
7. Insights into the atomic and electronic structure triggered by ordered nitrogen vacancies in CrN10.1103/PhysRevB.87.014104 ↗
8. Computational and experimental studies on structure and mechanical properties of Mo–Al–N10.1016/j.actamat.2016.01.063 ↗
9. Composition driven phase evolution and mechanical properties of Mo–Cr–N hard coatings10.1063/1.4926734 ↗
10. Structure, stress, and mechanical properties of Mo-Al-N thin films deposited by dc reactive magnetron cosputtering: role of point defects10.1116/6.0000292 ↗
11. Quantification of dislocation nucleation stress in TiN through high-resolution in situ indentation experiments and first principles calculations10.1038/srep15813 ↗
12. Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations
13. Heavy-element-alloying for toughness enhancement of hard nitrides on the example Ti-W-N10.1016/j.actamat.2022.117897 ↗
14. High-throughput first-principles search for ceramic superlattices with improved ductility and fracture resistance10.1016/j.actamat.2020.116615 ↗
15. Mechanistic study of superlattice-enabled high toughness and hardness in MoN/TaN coatings10.1038/s43246-020-00064-4 ↗
16. Valence electron concentration as an indicator for mechanical properties in rocksalt structure nitrides, carbides and carbonitrides10.1016/j.actamat.2018.04.033 ↗
17. Large mechanical properties enhancement in ceramics through vacancy-mediated unit cell disturbance10.1038/s41467-023-44060-x ↗
18. Correlating point defects with mechanical properties in nanocrystalline TiN thin films
19. Effect of nitrogen vacancies on the growth, dislocation structure, and decomposition of single crystal epitaxial (Ti1-xAlx)Ny thin films10.1016/j.actamat.2020.116509 ↗
20. Vacancy hardening in single-crystal TiNx(001) layers10.1063/1.1568521 ↗
21. Bilayer period and ratio dependent structure and mechanical properties of TiN/MoN superlattices10.1016/j.actamat.2024.120313 ↗
22. Crystal structure of molybdenum nitride films made by reactive cathodic arc evaporation10.1016/S0257-8972(09)90060-3 ↗
23. Atomic-scale understanding of the structural evolution of TiN/AlN superlattice during nanoindentation— Part 1: deformation
24. Atomic-scale understanding of the structural evolution in TiN/AlN superlattice during nanoindentation—Part 2: strengthening
25. Atomic insights on intermixing of nanoscale nitride multilayer triggered by nanoindentation10.1016/j.actamat.2021.117004 ↗
26. Characterization of the induced plastic zone in a single crystal TiN(001) Film by nanoindentation and transmission electron microscopy10.1557/JMR.1997.0286 ↗
27. Characterization of misfit dislocations in epitaxial (001)-oriented TiN, NbN, VN, and (Ti,Nb) N film heterostructures by transmission electron microscopy10.1016/0022-0248(94)90757-9 ↗
28. The formation of supersaturated solid solutions in Fe–Cu alloys deformed by high-pressure torsion10.1016/j.actamat.2011.10.044 ↗
29. Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography10.1016/j.actamat.2009.07.028 ↗
30. Shear strain gradient in Cu/Nb nanolaminates: strain accommodation and chemical mixing10.1016/j.actamat.2022.117986 ↗
31. A transmission electron microscopy study of the deformation behavior underneath nanoindents in nanoscale Al–TiN multilayered composites10.1080/14786430903459691 ↗
32. Plastic deformation of single crystals of sapphire: basal slip and twinning10.1016/0001-6160(57)90090-1 ↗
33. CalAtom: a software for quantitatively analysing atomic columns in a transmission electron microscope image10.1016/j.ultramic.2019.04.007 ↗
34. Mechanically driven alloying of immiscible elements10.1103/PhysRevLett.68.2235 ↗
35. New insights on the formation of supersaturated solid solutions in the Cu–Cr system deformed by high-pressure torsion10.1016/j.actamat.2014.02.003 ↗
36. Mechanical alloying of Cu and Fe induced by severe plastic deformation of a Cu–Fe composite10.1016/j.actamat.2005.01.024 ↗
37. Diffusion mechanism of bound Schottky defect in magnesium oxide
38. Theoretical investigation of structural and mechanical stability of Mo2N10.1016/j.ssc.2020.113919 ↗
39. High density of stacking faults strengthened TaN/TiN multilayer10.1016/j.actamat.2023.119027 ↗
40. Mechanical properties and epitaxial growth of TiN/AlN superlattices10.1016/j.surfcoat.2019.07.003 ↗
41. Valence electron concentration- and N vacancy-induced elasticity in cubic early transition metal nitrides10.1016/j.actamat.2023.119078 ↗
42. Enhanced hardness in epitaxial TiAlScN alloy thin films and rocksalt TiN/(Al,Sc)N superlattices10.1063/1.4898067 ↗
43. The MoN–TaN system: role of vacancies in phase stability and mechanical properties