Anisotropy of plastic flow in Zr-2.5Nb pressure tube material analysed using a viscoplastic self-consistent approach

Plastic anisotropy is observed during plastic flow in samples from the axial and transverse directions of Zr-2.5Nb pressure tubes used in CANDU ¹ nuclear reactors tested in uniaxial tension. Plastic anisotropy was also measured in shear by testing in torsion ‘mini’ pressure tubes from the same material. Room temperature results from these experiments were analysed using a visco-plastic self-consistent model that takes into account the crystallographic texture of the material and allows for the single crystal work hardening behaviour to be described by means of a deformation law specific to each slip system. The visco-plastic self-consistent model was used to derive: (i) the evolution with strain of the critical resolved shear stress values consistent with prismatic, basal and pyramidal dislocation glide, (ii) the evolution of slip system activity as a function of strain, and (iii) the values of Hill`s plastic anisotropy coefficients that are consistent with the observed anisotropy of yielding and their dependence on accumulated strain. The model also allows for the prediction of the components of the flow stress tensor that cannot be measured experimentally and their dependence on the work hardening behaviour of pressure tube material. Moreover, the yield surface after different amounts of plastic strain was calculated using the visco-plastic self-consistent model, compared to the one that results from using the Hill`s anisotropy coefficients. Our work exposes the limitations of the Hill ellipsoid for describing plastic yield when microstructural evolution is present.