journal article·2022-10Open access

Self healing of creep-induced damage in Fe-3Au-4W by multiple healing agents studied by synchrotron X-ray nano-tomography

Y. Fu, H. Fang, F. Monaco, P. Cloetens, F.D. Tichelaar, J.G. van Meel, E. Brück, S. van der Zwaag, N.H. van Dijk

Acta Materialia· Volume 239

Abstract

Constant stress creep experiments at 550 °C were performed on a high-purity Fe-3Au-4W (wt.%) ternary alloy with about 1 at.% supersaturation for Au and W in order to study self healing of grain-boundary cavities by both Au-rich and W-rich precipitates. Using synchrotron X-ray nano-tomography, the development of the creep cavities and the healing precipitates at different stages of creep was visualised using two spatial resolutions (30 and 100 nm voxel size) for separate samples taken after different loading times. The healing kinetics was found to strongly depend on the nucleation time of the cavities. Cavities nucleated at an early stage of creep could be fully healed, while the healing of the late-nucleated cavities is much slower due to a decrease in the diffusional flux of the healing supersaturated solutes over time, as a result of (i) a decrease in inter-cavity spacing caused by cavity nucleation and (ii) a gradual depletion of the supersaturated solutes near the grain boundaries. The interaction between the competing healing mechanisms for creep cavities by Au-rich and W-rich precipitates is discussed. It was found that Au-rich precipitates are formed much faster than the W-rich precipitates, and thereby effectively provide creep damage healing on different time scales.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Intergranular cavitation in stressed metals10.1016/0001-6160(54)90166-2 ↗
2. Nabarro · 1995
3. Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions10.1038/nature01740 ↗
4. Progress in creep-resistant steels for high efficiency coal-fired power plants10.1115/1.4032372 ↗
5. Development of creep-resistant steels and alloys for use in power plants
6. Creep cavitation in metals10.1016/S0749-6419(02)00111-0 ↗
7. Self-healing materials10.1002/adma.201003036 ↗
8. Self-healing phenomena in metals10.1002/admi.201800226 ↗
9. Self-Healing Metals
10. Beneficial effect of B segregation on creep cavitation in a type 347 austenitic stainless steel10.1016/j.scriptamat.2004.11.016 ↗
11. Improved creep strength and creep ductility of type 347 austenitic stainless steel through the self-healing effect of boron for creep cavitation10.1007/s11661-005-0311-0 ↗
12. Positron annihilation study on repeated deformation/precipitation aging in Fe–Cu–B–N alloys10.1007/s10853-013-7411-9 ↗
13. In-situ determination of aging precipitation in deformed Fe-Cu and Fe-Cu-B-N alloys by time-resolved small-angle neutron scattering10.1103/PhysRevB.82.174111 ↗
14. Thermally activated precipitation at deformation-induced defects in Fe-Cu and Fe-Cu-B-N alloys studied by positron annihilation spectroscopy10.1103/PhysRevB.81.094103 ↗
15. Autonomous filling of creep cavities in Fe-Au alloys studied by synchrotron X-ray nano-tomography10.1016/j.actamat.2016.09.023 ↗
16. Defect-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys studied by in situ small-angle neutron scattering10.1016/j.actamat.2013.08.015 ↗
17. Self healing of creep damage by gold precipitation in iron alloys10.1002/adem.201400511 ↗
18. Autonomous repair mechanism of creep damage in Fe-Au and Fe-Au-B-N alloys10.1007/s11661-015-3169-9 ↗
19. Preferential Au precipitation at deformation-induced defects in Fe–Au and Fe–Au–B–N alloys10.1016/j.jallcom.2013.09.011 ↗
20. Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys10.1007/s11661-016-3642-0 ↗
21. Self healing of creep damage in iron-based alloys by supersaturated tungsten10.1016/j.actamat.2019.01.014 ↗
22. Competitive healing of creep-induced damage in a ternary Fe-3Au-4 W alloy10.1007/s11661-020-05862-6 ↗
23. Modelling the formation and self-healing of creep damage in iron-based alloys10.1007/s10853-018-2666-9 ↗
24. Finite element modelling of creep cavity filling by solute diffusion10.1080/14786435.2017.1418097 ↗
25. First-principles analysis of solute diffusion in dilute bcc Fe-X alloys10.1103/PhysRevB.96.094105 ↗
26. A first step towards computational design of W-containing self-healing ferritic creep resistant steels10.1080/14686996.2020.1814679 ↗
27. In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography10.1016/j.msea.2007.05.108 ↗
28. Simultaneous tomography and diffraction analysis of creep damage10.1126/science.1106778 ↗
29. In situ nanotomography study of creep cavities in Al-3.6-Cu alloy10.1016/j.actamat.2018.12.020 ↗
30. In-situ observation of creep damage evolution in Al-Al2O3 MMCs by synchrotron X-ray microtomography10.3139/146.110277 ↗
31. Holotomography: quantitative phase tomography with micrometer resolution using hard synchrotron radiation x rays10.1063/1.125225 ↗
32. The isotropic shear modulus of multicomponent Fe-base solid solutions10.1016/S1359-6454(02)00096-4 ↗
33. Deformation-mechanism maps for pure iron, two austenitic stainless steels, and a low-alloy ferritic steel
34. Factors affecting the high temperature strength of polcyrystalline solids10.1016/0001-6160(62)90058-5 ↗
35. High-energy cryo x-ray nano-imaging at the ID16A beamline of ESRF
36. The PyHST2 hybrid distributed code for high speed tomographic reconstruction with iterative reconstruction and a priori knowledge capabilities10.1016/j.nimb.2013.09.030 ↗
37. DIPimage (2019), MATLAB toolbox, Quantitative Imaging Group, Delft University of Technology, the Netherlands. Retrieved from https://diplib.org/.
38. 8 - fundamental aspects of creep deformation and deformation mechanism map
39. Surface precipitation of supersaturated solutes in a ternary Fe–Au–W alloy and its binary counterparts10.1007/s10853-020-05571-w ↗
40. Strain dependence of creep cavity nucleation in low alloy and 12%Cr steels10.1179/026708396790165858 ↗
41. Creep cavitation by vacancy diffusion in plastically deforming solid10.1179/msc.1978.12.4.172 ↗
42. Intergranular fracture during power-law creep10.1016/0001-6160(79)90173-1 ↗
43. Plastic creep flow effects in the diffusive cavitation of grain-boundaries10.1016/0001-6160(80)90001-2 ↗
44. Void growth due to creep and grain boundary diffusion at high triaxialities10.1016/0022-5096(94)00059-E ↗
45. Diffusive growth of grain-boundary cavities10.1016/0001-6160(81)90009-2 ↗
46. Modelling the effect of deformation-induced vacancies on segregation and precipitation10.1016/0956-7151(94)90056-6 ↗
47. Solute diffusion during high-temperature plastic deformation in alloys10.1016/j.msea.2011.06.015 ↗