Macroscopic energy barrier and rate-independent hysteresis in martensitic transformations
Source abstract
Abstract
Abstract A thermodynamic theory for the lower-bound hysteresis in martensitic transformations is developed. It is shown that the elastic energy generated by the transformation-induced crystal lattice misfit makes the system free energy a nonlinear function of the volume fractions of the phases, lifts the additivity principle and ergodicity hypothesis of the conventional Gibbsian thermodynamics, and produces a macroscopic energy barrier between the parent and product phases. Since the energy barrier is proportional to the macroscopic volume of the system and thus cannot be surmounted by the thermally assisted nucleation of the new phase, a rate-independent hysteresis of thermodynamic nature is produced, which sets the lower bound for the total transformation hysteresis. This lower-bound hysteresis is characterized by two critical temperatures of the martensitic and reverse transformations, one during cooling and another during heating, with their difference defining the corresponding transformation hysteresis. The necessary undercooling and overheating are intrinsic material properties determined by the transformation elastic energy. The theory is tested against experimental observations, explains the ubiquitous temperature hysteresis in the martensitic transformations, and correlates the hysteresis with the volumetric misfit strain of the transformations. The proposed theory is generic and is applicable to any displacive (diffusionless and martensitic) phase transformations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Shape Memory Alloy Transformations · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Willard Gibbs · 1948 · vol. I
2. Khachaturyan · 1983
3. Equilibrium and phase diagrams of coherent phases in solids
4. A simple model for coherent equilibrium10.1016/0001-6160(84)90173-1 ↗
5. Phase equilibrium in two-phase coherent solids10.1007/BF02647191 ↗
6. On the theory of the formation of martensite
7. The crystallography of martensite transformations I, II, III10.1016/0001-6160(54)90102-9 ↗
8. The determination of the elastic field of an ellipsoidal inclusion, and related problems
9. Toughening of brittle solids by martensitic transformations10.1016/0001-6160(86)90052-0 ↗
10. A theoretical and numerical approach to the plastic behavior of steels during phase transformations — I. Derivation of general relations10.1016/0022-5096(86)90009-8 ↗
11. On the thermodynamics of open two-phase systems with coherent interfaces: application to metal-hydrogen systems10.1103/PhysRevLett.74.2523 ↗
12. Thermodynamics of open two-phase systems with coherent interfaces: aplication to metal-hydrogen systems10.1016/j.actamat.2005.08.044 ↗
13. Christian · 1965
14. Preparation of single phase β and α cerium samples for low temperature measurement10.1016/0022-0248(74)90098-0 ↗
15. In-situ three-dimensional reciprocal space mapping of diffuse scattering intensity distribution and data analysis for precursor phenomenon in shape memory alloy
16. Theory and experimental evidence of phonon domains and their roles in pre-martensitic phenomena10.1038/npjcompumats.2015.2 ↗
17. Adaptive phase formation in martensitic transformation10.1103/PhysRevB.43.10832 ↗
18. The martensitic transformation in the iron-nickel system
19. Vinnikov · Metallofizika · 1974 · 55 · 24
20. Lattice parameters of martensite and austenite in Fe-Ni alloys10.1063/1.1658218 ↗
21. Elastic properties of metals and alloys, I. iron, nickel, and iron-nickel alloys10.1063/1.3253127 ↗
22. Compatibility and accommodation in displacive phase transformations10.1016/j.pmatsci.2011.01.003 ↗
23. The austenite/lath martensite interface in steels: structure, athermal motion, and in-situ transformation strain revealed by simulation and theory10.1016/j.actamat.2017.05.044 ↗
24. Contribution of austenite-martensite transformation to deformability of advanced high strength steels: from atomistic mechanisms to microstructural response10.1016/j.actamat.2018.06.028 ↗
25. Atomistic modeling of thermodynamic equilibrium and polymorphism of iron10.1088/0953-8984/24/22/225404 ↗
26. Criterion for the action of applied stress in the martensitic transformation10.1016/0001-6160(53)90083-2 ↗
27. Three-dimensional phase field model of low-symmetry martensitic transformation in polycrystal: simulation of ζ2′ martensite in AuCd alloys10.1016/S1359-6454(01)00108-2 ↗
28. The effects of free surfaces on martensite microstructures: 3d phase field microelasticity simulation study10.1016/j.actamat.2003.10.037 ↗