journal article·2021-05

Effects of a pressurized water treatment on internal gelation sol–gel microspheres

Jeffrey A. Katalenich, Brian B. Kitchen

Publisher page

Abstract

Based on previous observations that a pressurized water treatment (PWT) prevented cracking of sol–gel microspheres, we investigated the effects of a PWT on microsphere crystallinity, density, and specific surface area (SSA). Results were used to determine how a PWT alters the properties of microspheres upon drying and heating. Microspheres with diameters near 100–200 µm were prepared with and without a PWT and measured using x-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen adsorption (BET), and pycnometry. Properties of air-dried microspheres processed with and without a PWT are compared. In addition, the properties of microspheres processed using a PWT are reported after heating to 150, 450, 750, 1050, and 1350 °C. XRD measurements indicate that the PWT step improves the crystallinity of air-dried microspheres. XRD data were also used to calculate crystallite size, which increases with higher heat-treatment temperatures. TEM images support crystallite size calculations from XRD data and provide an indication of the range of crystallite sizes, particularly for samples processed at higher temperatures where crystallite sizes are too large for estimation using the Scherrer formula. Density and SSA measurements performed as a function of heat-treatment temperature indicate that a PWT increases the density of air-dried microspheres, creates a pore network, and that significant densification occurs between 450 and 750 °C. These results may be used to inform decisions on internal gelation flowsheet parameters to optimize the microsphere formation and gelation step, prevent microsphere cracking, and produce microspheres suitable for subsequent coating operations or pressing into pellets.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Inhalation and Respiratory Drug Delivery · Microencapsulation and Drying Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Carmack WJ, Richardson WC, Husser DL, Mohr TC (2004) Internal gelation as applied to the production of uranium nitride space nuclear fuel. AIP Conf Proc 699:420–425. https://doi.org/10.1063/1.164960110.1063/1.1649601 ↗
2. Hunt RD, McMurray JW, Helmreich GW et al. (2020) Production of 28μm zirconium carbide kernels using the internal gelation process and microfluidics. J Nucl Mater 528:151870. https://doi.org/10.1016/j.jnucmat.2019.15187010.1016/j.jnucmat.2019.151870 ↗
3. Nagley SG, Barnes CM, Husser DL et al. (2010) Fabrication of uranium oxycarbide kernels for HTR fuel. Idaho National Laboratory, Idaho Falls, ID
4. McMurray JW, Silva CM, Helmreich GW et al. (2016) Production of low-enriched uranium nitride kernels for TRISO particle irradiation testing. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/1376320 ↗
5. Louwrier KP, Steemers T (1970) Sol-gel process development at the European Institute for Transuranium Elements, Karlsruhe, Germany. Oak Ridge National Laboratory, Gatlinburg, TN, pp 244–252
6. Terrani KA, Jolly BC, Harp JM (2020) Uranium nitride tristructural-isotropic fuel particle. J Nucl Mater 531:152034. https://doi.org/10.1016/j.jnucmat.2020.15203410.1016/j.jnucmat.2020.152034 ↗
7. Brugghen FWVD, Noothout AJ, Hermans MEA et al. (1970) A U(VI)-process for microsphere production. In: Sol-gel processes and reactor fuel cycles. Oak Ridge National Laboratory, Gatlinburg, TN
8. Kanij JBW, Noothout AJ, Votocek O (1973) The KEMA U(VI)-process for the production of UO2 microspheres. In: Proceedings of a Panel on Sol-Gel Process for Fuel Fabrication. International Atomic Energy Agency, Vienna
9. Hermans MEA (1973) Status report from The Netherlands. In: Proceedings of a Panel on Sol-Gel Processes for Fuel Fabrication. International Atomic Energy Agency, Vienna, Austria, pp 33–35
10. Collins JL (2005) Experimental methodology for determining optimum process parameters for production of hydrous metal oxides by internal gelation. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/885982 ↗
11. Collins JL, Chi A (2009) Determination of ideal broth formulations needed to prepare hydrous cerium oxide microspheres via the internal gelation process. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/947141 ↗
12. Collins JL, Pye SL (2008) Determination of ideal broth formulations needed to prepare hydrous aluminum oxide microspheres by the internal gelation process. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/947140 ↗
13. Benay G, Hubert F, Modolo G (2008) Preparation of yttria-stabilized zirconia-ceria kernels as fuel precursors using internal gelation. Radiochim Acta 96:285–291. https://doi.org/10.1524/ract.2008.148910.1524/ract.2008.1489 ↗
14. Collins JL, Watson JS (2000) Economic evaluation for the production of sorbents and catalysts derived from hydrous titanium oxide microspheres prepared by the HMTA internal gelation process. Oak Ridge National Laboratory, Oak Ridge, TN
15. Idemitsu K, Arima T, Inagaki Y et al. (2003) Manufacturing of zirconia microspheres doped with erbia, yttria and ceria by internal gelation process as a part of a cermet fuel. J Nucl Mater 319:31–36. https://doi.org/10.1016/S0022-3115(03)00130-210.1016/S0022-3115(03)00130-2 ↗
16. Kumar N, Pai RV, Joshi JK et al. (2006) Preparation of (U,Pu)O2 pellets through sol–gel microsphere pelletization technique. J Nucl Mater 359:69–79. https://doi.org/10.1016/j.jnucmat.2006.07.01810.1016/j.jnucmat.2006.07.018 ↗
17. Kumar A, Radhakrishna J, Kumar N et al. (2013) Studies on preparation of (U0.47,Pu0.53)O2 microspheres by internal gelation process. J Nucl Mater 434:162–169. https://doi.org/10.1016/j.jnucmat.2012.11.00910.1016/j.jnucmat.2012.11.009 ↗
18. Pai RV, Mukerjee SK, Vaidya VN (2004) Fabrication of (Th,U)O2 pellets containing 3 mol% of uranium by gel pelletisation technique. J Nucl Mater 325:159–168. https://doi.org/10.1016/j.jnucmat.2003.11.01010.1016/j.jnucmat.2003.11.010 ↗
19. Pai RV, Dehadraya JV, Bhattacharya S et al. (2008) Fabrication of dense (Th,U)O2 pellets through microspheres impregnation technique. J Nucl Mater 381:249–258. https://doi.org/10.1016/j.jnucmat.2008.07.04410.1016/j.jnucmat.2008.07.044 ↗
20. Morihira M, Nakamura M, Ozawa T et al. (2005) Final report of the FUJI Project concerning the research and development of advanced sphere-pac fuel among JNC, PSI, and NRG. Japan Nuclear Cycle Development Institute, Tokai, Japan
21. Ledergerber G, Ingold F, Stratton RW et al. (1996) Preparation of transuranium fuel and target materials for the transmutation of actinides by gel coconversion. Nucl Technol 114:194–204. https://doi.org/10.13182/NT96-A3524910.13182/NT96-A35249 ↗
22. Daniels H, Neumeier S, Modolo G (2010) Synthesis of Uranium-based Microspheres for Transmutation of Minor Actinides. ACSEPT International Workshop, Lisbon, Portugal, 31 Mar - 2 Apr 2010, Commissariat a l’Energie Atomique - CEA (France)
23. Petti D (2009) Deep-Burn: Development of Transuranic Fuel for High-Temperature Helium-Cooled Reactors. - is a 604pg report with no report number, issued by Idaho National Laboratory, Idaho Falls, ID
24. Robisson AC, Lemonnier S, Grandjean S (2004) Sol gel chemistry applied to the synthesis of actinide-based compounds for the fabrication of advanced fuels. CEA/VALRHO, Nimes, France
25. Katalenich JA, Hartman MR, O’Brien RC, Howe, SD (2013) Fabrication of cerium oxide and uranium oxide microspheres for space nuclear power applications. In: Nuclear and emerging technologies for space (NETS 2013), Albuquerque NM,02/25/2013,02/28/2013. Idaho National Laboratory, Idaho Falls, ID, Albuquerque, NM
26. Burkes D, Wachs D, Werner J, Howe S (2007) An overview of current and past W-UO2 CERMET fuel fabrication technology. In: Space Nuclear Conference 2007—Proceedings of the Embedded Topical Meeting, Idaho National Laboratory, Idaho Falls, ID
27. Hunt RD, Collins JL (2004) Uranium kernel formation via internal gelation. Radiochim Acta 92:909–915. https://doi.org/10.1524/ract.92.12.909.5511010.1524/ract.92.12.909.55110 ↗
28. Collins JL (2004) Production of depleted UO2 kernels for the advanced gas-cooled reactor program for use in TRISO coating development. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/885844 ↗
29. Barnes C, Richardson C, Nagley S et al. (2010) Fabrication of uranium oxycarbide kernels for HTR fuel. Idaho National Laboratory (United States). Funding organisation: DOE-NE (United States), Idaho Falls, ID
30. Grover SB, Petti D, and Maki J (2010) Completion of the first NGNP Advanced Gas Reactor Fuel Irradiation Experiment, AGR1, in the Advanced Test Reactor, Idaho National Laboratory, Idaho Falls, ID
31. Phillips JA, Barnes CM, Hunn JD (2010) Fabrication and comparison of fuels for advanced gas reactor irradiation tests. In: Proceedings of the HTR, Oak Ridge National Laboratory, Oak Ridge, TN
32. Snead LL, Terrani KA, Venneri F, et al. (2011) Fully ceramic microencapsulated fuels: a transformational technology for present and next generation reactors—properties and fabrication of FCM fuel. Trans Am Nucl Soc 104:668–670
33. Terrani KA, Snead LL, Gehin JC (2012) Microencapsulated fuel technology for commercial light water and advanced reactor application. J Nucl Mater 427:209–224. https://doi.org/10.1016/j.jnucmat.2012.05.02110.1016/j.jnucmat.2012.05.021 ↗
34. Terrani K, Kiggans J, Katoh Y, et al. (2012) Fabrication and characterization of fully ceramic microencapsulated fuels. J Nucl Mater 426. https://doi.org/10.1016/j.jnucmat.2012.03.04910.1016/j.jnucmat.2012.03.049 ↗
35. Snead LL (2018) Method for fabrication of fully ceramic microencapsulation nuclear fuel, US Patent US10109378B2, Ultra Safe Nuclear Corp
36. Venneri F (2015) Fully Ceramic Micro-Encapsulated (FCM) Fuel for CANDUs and other Reactors, US Patent US20150170767A1, Ultra Safe Nuclear Corp
37. Venneri F (2019) Dispersion Ceramic Micro-encapsulated (DCM) Nuclear Fuel and Related Methods, US Patent US10475543B2, Ultra Safe Nuclear Corp
38. Venneri F (2019) Micro Modular Reactor (MMR) Energy Systems, in proc. IFNEC Workshop, IFNEC, Warsaw, Poland
39. Powers JJ, Worrall A, Terrani KA et al. (2014) Fully ceramic microencapsulated fuels. Characteristics and potential LWR applications. Japan Atomic Energy Agency, Tōkai, Ibaraki Prefecture, Kyoto, Japan
40. Pappano P (2018) TRISO-X Fuel Fabrication Facility Overview, Rockville, MD - is a presentation given to the US Nuclear Regulatory Commission
41. X-energy. Reactor: Xe-Mobile - X-energy: Nuclear Energy, Nuclear Reactors & Fuel Design. https://x-energy.com/reactors/xe-mobile. Accessed 22 Apr 2020
42. Arafat Y (2019) Westinghouse eVinci Micro-Reactor Program, in proc. GAIN-EPRI-NEI-US NIC Micro-Reactor Workshop, Idaho Falls, ID
43. BWX Technologies (2020) BWX Technologies-led team wins department of defense contract for mobile nuclear reactor design. https://www.bwxt.com/news/2020/03/17/BWXT-Led-Team-Wins-Department-of-Defense-Contract-for-Mobile-Nuclear-Reactor-Design. Accessed 22 Apr 2020
44. BWX Technologies (2020) BWX Technologies Continuing TRISO Line Restart Activities with Kernel Formation and Sintering Operations. https://www.bwxt.com/news/2020/04/21/BWXT-Continuing-TRISO-Line-Restart-Activities-With-Kernel-Formation-and-Sintering-Operations. Accessed 22 Apr 2020
45. Venneri P (2019) Overview of USNC-Tech LEU Fission Power Systems for Space Applications, in proc. Nuclear Energy in Space: Nonproliferation Risks and Solutions, Washington DC, Univ. Texas
46. X-energy, Nuclear & Space - X-energy: Nuclear Energy, Nuclear Reactors & Fuel Design. https://x-energy.com/why/nuclear-and-space. Accessed 22 Apr 2020
47. Lloyd MH, Bischoff K, Peng K et al. (1976) Crystal habit and phase attribution of U (VI) oxides in a gelation process. J Inorg Nucl Chem 38:1141–114710.1016/0022-1902(76)80237-0 ↗
48. Vaidya VN, Mukherjee SK, Joshi JK et al. (1987) A study of chemical parameters of the internal gelation based sol-gel process for uranium dioxide. J Nucl Mater 148:324–33110.1016/0022-3115(87)90026-2 ↗
49. Collins JL, Lloyd MH, Fellows RL (1984) Effects of process variables on reaction mechanisms responsible for ADUN hydrolysis, precipitation, and gelation in the internal gelation gel-sphere process. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/707319 ↗
50. Collins JL, Lloyd MH, Shell SE (2005) Control of urania crystallite size by HMTA-urea reactions in the internal gelation process for preparing (U, Pu)O2 fuel kernels. Oak Ridge National Laboratory, Oak Ridge, TN10.2172/885943 ↗
51. Hunt RD, Montgomery FC, Collins JL (2010) Treatment techniques to prevent cracking of amorphous microspheres made by the internal gelation process. J Nucl Mater 405:160–164. https://doi.org/10.1016/j.jnucmat.2010.08.00710.1016/j.jnucmat.2010.08.007 ↗
52. Katalenich JA (2020) Use of a pressurized water treatment to prevent cracking of internal gelation sol-gel microspheres. J Sol-Gel Sci Technol. https://doi.org/10.1007/s10971-020-05230-110.1007/s10971-020-05230-1 ↗
53. Gao Y, Ma J, Zhao X et al. (2016) The fabrication of ZrO2–ZrC microspheres by internal gelation and carbothermal reduction process. J Am Ceram Soc 99:1184–1191. https://doi.org/10.1111/jace.1406610.1111/jace.14066 ↗
54. Borland M, Frank S, Lessing P et al. (2008) Evaluation of aqueous and powder processing techniques for production of Pu-238 fueled general purpose heat sources. Idaho National Laboratory, Idaho Falls, ID
55. Katalenich JA (2017) Production of cerium dioxide microspheres by an internal gelation sol–gel method. J Sol-Gel Sci Technol 82. https://doi.org/10.1007/s10971-017-4345-810.1007/s10971-017-4345-8 ↗
56. Katalenich JA, Kitchen BB, Pierson BD (2018) Production of monodisperse cerium oxide microspheres with diameters near 100 µm by internal-gelation sol–gel methods. J Sol-Gel Sci Technol 86:329–342. https://doi.org/10.1007/s10971-018-4641-y10.1007/s10971-018-4641-y ↗
57. Katalenich JA (2019) Impurity levels in cerium oxide microspheres prepared by internal gelation sol–gel methods. J Sol-Gel Sci Technol. https://doi.org/10.1007/s10971-019-05165-210.1007/s10971-019-05165-2 ↗
58. Langford JI, Wilson AJC (1978) Scherrer after sixty years: a survey and some new results in the determination of crystallite size. J Appl Crystallogr 11:102–11310.1107/S0021889878012844 ↗
59. Tian HH, Atzmon M (1999) Comparison of X-ray analysis methods used to determine the grain size and strain in nanocrystalline materials. Philos Mag A 79:1769–1786. https://doi.org/10.1080/0141861990821039110.1080/01418619908210391 ↗
60. Debets PC, Loopstra BO (1963) On the uranates of ammonium—II X-ray investigation of the compounds in the system NH3-UO3-H2O. J Inorg Nucl Chem 25:945–95310.1016/0022-1902(63)80027-5 ↗
61. Bickford DF, Rankin DT (1975) Fabrication of granule and pellet heat sources from oxalate-based 238PuO2. Savannah River Laboratory, Aiken, SC
62. Bickford DF, Rankin DT, Smith PK (1976) Preparation, microstructures, and properties of PuO2. Savannah River Laboratory, Aiken, SC, Berkeley, CA
63. Kent RA (1979) LASL fabrication flowsheet for GPHS fuel pellets. Los Alamos Scientific Laboratory, Los Alamos, NM10.2172/5862077 ↗
64. Ganguly C (1993) Sol-gel microsphere pelletization: a powder-free advanced process for fabrication of ceramic nuclear fuel pellets. Bull Mater Sci 16:509–52210.1007/BF02757652 ↗
65. Zimmer E, Ganguly C, Borchardt J, Langen H (1988) SGMP—an advanced method for fabrication of UO2 and MOX fuel pellets. J Nucl Mater 152:169–17710.1016/0022-3115(88)90323-6 ↗
66. Suryanarayana S, Kumar N, Bamankar YR et al. (1996) Fabrication of UO2 pellets by gel pelletization technique without addition of carbon as pore former. J Nucl Mater 230:140–14710.1016/0022-3115(96)00162-6 ↗