Preparation and crystal activation energy of long yttrium aluminum garnet gel fibers
Source abstract
Abstract
A spinning yttrium aluminum garnet (YAG) precursor sol was obtained by using aluminum chloride, aluminum and yttria powder as raw materials. The spinnability and stability of precursor sol were improved by adding acetic acid. Long gel fiber of 40 cm was prepared by using PVP as spinning additive. The YAG fiber with fine grain was obtained by sintering gel fiber at 1000 °C for 2 h. However, a rough surface with an average grain size of 0.8 μm can be observed when gel fibers were fired at 1500 °C for 2 h. Calculated from Kissinger equation, the crystallization activation energy value (E a) of YAG fibers was 582.6 kJ/mol. A spinning yttrium aluminum garnet (YAG) precursor sol was obtained by using aluminum chloride, aluminum and yttria powder as raw materials. The spinnability and stability of precursor sol were improved by adding acetic acid. Long gel fiber with 40 cm was prepared by using PVP as spinning additive. The YAG fiber with smooth surface was obtained by sintering gel fiber at 1000 °C for 2h. However, a rough surface with an average grain size of 0.8 μm can be observed when gel fibers were sintered at 1500 °C for 2 h. Calculated from Kissinger equation, the crystallization activation energy value (E a ) of YAG fibers was 582.6 KJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Glass properties and applications · Silicone and Siloxane Chemistry · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Liu B, Li J, Yavetskiy R et al (2015) Fabrication of YAG transparent ceramics using carbonate precipitated yttria powder. J Eur Ceram Soc 35(8):2379–239010.1016/j.jeurceramsoc.2015.02.014 ↗
2. Tan H, Ma X, Lu J, Li K (2014) Effect of zirconia on crystallization of yttrium aluminum garnet precursor gel fibers. Ceramics-Silikáty 58(2):118–122
3. Pullar RC, Taylor MD, Bhattacharya AK (2006) Effect of sodium on the creep resistance of yttrium aluminium garnet (YAG) fibres. J Eur Ceram Soc 26(9):1577–158310.1016/j.jeurceramsoc.2005.03.254 ↗
4. Pullar RC, Bhattacharya AK (1999) Polycrystalline yttrium aluminium garnet (YAG) fibres produced from the steaming of an aqueous sol–gel precursor. Mater Lett 39(3):173–17810.1016/S0167-577X(98)00236-5 ↗
5. Pullar RC, Taylor MD, Bhattacharya AK (1999) The sintering behaviour, mechanical properties and creep resistance of aligned polycrystalline yttrium aluminium garnet (YAG) fibres, produced from an aqueous sol–gel precursor. J Eur Ceram Soc 19(9):1747–175810.1016/S0955-2219(98)00283-0 ↗
6. Shojaie-Bahaabad M, Taheri-Nassaj E, Naghizadeh R (2009) Effect of yttria on crystallization and microstructure of an alumina–YAG fiber prepared by aqueous sol–gel process. Ceram Int 35(1):391–39610.1016/j.ceramint.2007.11.010 ↗
7. Pfeifer S, Bischoff M, Niewa R et al (2014) Structure formation in yttrium aluminum garnet (YAG) fibers. J Eur Ceram Soc 34(5):1321–132810.1016/j.jeurceramsoc.2013.10.036 ↗
8. Kim HJ, Fair GE, Hart AM et al (2015) Development of polycrystalline yttrium aluminum garnet (YAG) fibers. J Eur Ceram Soc 35(15):4251–425810.1016/j.jeurceramsoc.2015.07.011 ↗
9. Li CH, Zhang YJ, Gong HY et al (2009) Preparation, microstructure and properties of yttrium aluminum garnet fibers prepared by sol–gel method. Mater Chem Phys 113(1):31–3510.1016/j.matchemphys.2008.07.025 ↗
10. Shojaie-Bahaabad M, Taheri-Nassaj E, Naghizadeh R (2008) An alumina–YAG nanostructured fiber prepared from an aqueous sol–gel precursor: preparation, rheological behavior and spinnability. Ceram Int 34(8):1893–190210.1016/j.ceramint.2007.07.032 ↗
11. Tan H, Ma X, Wang C et al (2013) Kinetics of grain-growth of yttrium aluminum garnet fibers prepared by sol–gel method. Ceramics-Silikáty 57(4):285–289
12. Wang HS, Qiao X, Chen JG et al (2005) Mechanisms of PVP in the preparation of silver nanoparticles. Mater Chem Phys 94(2–3):449–45310.1016/j.matchemphys.2005.05.005 ↗
13. Tan H, Ding Y, Yang J (2010) Mullite fibers prepared from an inorganic sol–gel precursor. J sol–gel Sci Technol 53(2):378–38310.1007/s10971-009-2106-z ↗
14. Rodrigues AM, Mercury JMR, Leal VS et al (2013) Isothermal and non-isothermal crystallization of a fresnoite glass. J Non Cryst Solids 362(2):114–11910.1016/j.jnoncrysol.2012.11.026 ↗
15. Silva RA, Teixeira SR, Souza AE et al (2011) Nucleation kinetics of crystalline phases from a kaolinitic body used in the processing of red ceramics. Appl Clay Sci 52(1–2):165–17010.1016/j.clay.2011.02.019 ↗
16. Campos AL, Kawachi EY, Oliwera TC et al (2005) Mullite crystallization mechanism obtained from kinetic parameters determination for seed and non-seeded gel. Mater Sci Eng B 112(3):169–17310.1016/j.mseb.2005.02.050 ↗
17. Ke S, Wang Y, Pan Z (2014) Effect of lithium chloride on crystallization process of neodymium disilicate. Ceram Int 40(9):14341–1434610.1016/j.ceramint.2014.06.025 ↗
18. Okada K (2008) Activation energy of mullitization from various starting materials. J Eur Ceram Soc 28(2):377–38210.1016/j.jeurceramsoc.2007.03.015 ↗
19. Hou JG, Kumar RV, Qu YF (2009) Crystallization kinetics and densification of YAG nanoparticles from various chelating agents. Mater Res Bull 44(8):1786–179110.1016/j.materresbull.2009.03.001 ↗
20. Gong H, Tang DY, Huang H et al (2013) Crystallization kinetics and characterization of nanosized Nd:YAG by a modified sol–gel combustion process. J Cryst Growth 362(1):52–5710.1016/j.jcrysgro.2011.12.087 ↗