Influence of Ti addition on boehmite-derived aluminum silicate aerogels: structure and properties

Aluminosilicate aerogels offer potential for extremely low thermal conductivities at temperatures greater than 900 °C, beyond where silica aerogels reach their upper temperature use limits. Aerogels have been synthesized at two Al:Si ratios, a 3Al:1Si mullite composition, and an 8Al:1Si alumina rich composition. Boehmite (AlOOH) is used as the Al source, and tetraethoxysilane as the Si precursor. The influence of Ti as a ternary constituent, introduced through the addition of titanium isopropoxide in the sol–gel synthesis, on aerogel morphology and thermal properties is evaluated. Four different boehmite precursor powders are evaluated. Morphology, surface area and pore size, and thermal transformation vary with the crystallite size of the starting boehmite powder, as does incorporation of titanium and evolution of Ti-containing crystalline phases. The addition of Ti influences sol viscosity, gelation time, surface area and pore size distribution, as well as phase formation on heat treatment.