Formation of microstructures responsible for remarkable properties of the Ni- and Co-based superalloys
Source abstract
Abstract
Abstract This article, by the example of 3 superalloys, discusses the principles that should be followed in designing new multicomponent alloys. Experimentally, it was shown that these principles are as follows: 1. Chemical interaction between dissimilar atoms exist always, in all alloys and at any temperature of heating; 2. Alloys have a not previously known property of changing the sign of the chemical interaction at a change of the temperature, subsequently leading to a change in the type of microstructures; 3. A model of pairwise interaction is realized in multicomponent alloys, according to which the chemical interaction between dissimilar atoms (which exists within each of the diffusion couples of a multicomponent alloy), occurs similarly to the chemical interaction in a corresponding binary alloy. Using this approach, it has been found experimentally that the process of partitioning of a multicomponent alloy into diffusion couples takes place in the liquid solution. It has been found that the remarkable properties of alloys of the Hastelloy and Tribaloy types are manifested by the fact that the tendency to phase separation takes place in the majority of their diffusion couples. It is shown that the formation of multicomponent chemical compounds (Laves phases) under conditions where in alloys there is a tendency to phase separation is impossible.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Metallurgical and Alloy Processes · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Khachaturyan · 1983
2. A structural study of the Fe-Cr system alloys10.1016/S1359-6454(96)00088-2 ↗
3. Morphology of Fe-Cr alloys10.1016/S0921-5093(97)00484-X ↗
4. Fe-rich portion of the Fe-Cr phase diagram: electron microscopy study10.1023/A:1015259517812 ↗
5. High-temperature B2 ordering in Fe50Co50 alloy10.1016/j.jpcs.2007.12.010 ↗
6. TEM study of the “ordering-phase separation” transition in Ni-Co alloys
7. “Chemical” phase transition in alloys: Ordering–phase separation
8. A new paradigm for alloys in materials sciences10.4236/ampc.2015.57025 ↗
9. Structural and phase transformations in the Ni75Mo20Al5 alloy10.1016/j.jallcom.2013.07.151 ↗
10. Structural-thermodynamic method of phase analysis of multicomponent alloys based on the example of the Ni50Со25Мо25 alloy10.1016/j.jallcom.2014.06.060 ↗
11. Phase transitions in alloys of the Ni-Mo system10.1016/j.matchemphys.2011.05.046 ↗
12. Nature of high hardness in the Co70Mo30 alloy10.1016/j.matchemphys.2012.04.046 ↗
13. Influence of Co content on stacking fault energy in Ni-Co base disk superalloys10.1557/jmr.2011.346 ↗
14. The welding metallurgy of Hastelloy alloys C-4, C-22, and C-27610.1007/BF02645001 ↗
15. Coarsening kinetics of γ' precipitates in the commercial nickel base superalloy Rene΄ 88 DT10.1016/j.actamat.2009.02.010 ↗
16. Phase and structural transformations in the Ni65Mo20Cr15 alloy at changing the temperature of heat treatment10.1016/j.jallcom.2013.11.100 ↗
17. ASM Handbook · 1992
18. Thermodynamic properties of Cr-Mo solid solution
19. Phase transformations in alloys of the Ni-Cr system
20. Phase transition ‘ordering-phase separation’ in alloys of Ni-Cr system Ni-Cr10.1016/j.matchemphys.2015.05.027 ↗
21. The precipitation and strengthening behavior of Ni2(Mo,Cr) in HASTELLOY® C-22HS® alloy, a newly developed high Mo-Ni -base superalloy
22. Davis · 2000 · 362
23. High-temperature hardness and wear resistance of Cobalt-based Tribaloy alloys
24. A newly developed Tribaloy alloy with increased ductility10.1016/j.scriptamat.2005.08.033 ↗
25. Structural transformations in the Co53Mo35Cr12 alloy at different temperatures10.1016/j.jallcom.2014.02.135 ↗
26. Study of composition-induced microstructural variation in the interface between Co-based hardfacing alloy and IN738 Ni-based superalloy10.1361/10599490418352 ↗