journal article·2017-11Open access

MgO-MgF2 system obtained by sol–gel method as an immobilizing agent of the electrolyte applied in the high temperature cells

Michał Zieliński, Bogdan Czajka, Mariusz Pietrowski, Iwona Tomska-Foralewska, Emilia Alwin, Monika Kot, Maria Wojciechowska

Abstract

Thermally activated batteries belong to the chemical sources of current employed in special situations, e.g., as reserve power supply systems applied in an emergency. That is why they are used in civilian and military devices. The thermal battery can be exposed to high temperatures, excessive closing force, acceleration force, vibration, shock or combination of all the conditions mentioned above [ 1 ]. Its greatest advantage is a 100% reliability even after a long-term storage (minimum 15 years) in extreme environmental conditions (from −50 to +60 °C) [ 2 , 3 ]. The time of battery activation, that is the time between the triggering pulse and the electric energy produced, should be shorter than 1 s. This is the time needed to initiate in the battery case the exothermic chemical reaction that will heat the battery to ~400 °C. At this temperature the electrolyte which is a salt (in our batteries a LiCl–KCl–RbCl mixture) gets molten [ 4 ]. The molten electrolyte must be kept by the immobilizing agent to prevent its leakage that could lead to short-circuit between cells [ 1 ].
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Inorganic Fluorides and Related Compounds · Molten salt chemistry and electrochemical processes · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Cheong H-W, Ha S-H, Choi Y-S (2012) Surface modified ceramic fiber separators for thermal batteries. J Ceram Process Res 13(2):308–311
2. Klasons V, Lamb CM (2002) Thermal batteries. Chap. 21. In: Linden D, Reddy TB (eds) Handbook of batteries, McGraw-Hill, New York
3. Tabat S, Styczyński S, Ziółkowski Z, Kamiński R, Szłapka R, Czajka B (2006) Problemy Techniki Uzbrojenia 97(1):241–245
4. Hash MC, Smag JA, Guidotti RA, Reinhardt FW (1992) Material-deposition processes in the separator of Li-Alloy/FeS2 thermal cell. Proceedings of the eight international symposium on molten salts. St.Louis, Missouri, USA, 92–16:228–24310.1149/199216.0228PV ↗
5. Zieliński M, Wojciechowska M (2012) Iridium supported on MgF2–MgO as catalyst for toluene hydrogenation. Catal Commun 18:1–410.1016/j.catcom.2011.11.006 ↗
6. Prescott HA, Li Z-J, Kemnitz E, Deutsch J, Lieske H (2005) New magnesium oxide fluorides with hydroxy groups as catalysts for Michael additions. J Mater Chem 15:4616–462810.1039/b510108e ↗
7. Wojciechowska M, Wajnert A, Tomska-Foralewska I, Zieliński M, Czajka B (2009) Properties of magnesium oxo-fluoride supports for metal catalysts. Catal Lett 128:77–8210.1007/s10562-008-9731-y ↗
8. Linden D, Reddy TB (2002) Handbook of batteries. McGraw-Hill, New York
9. White SM (1983) Molten salts techniques. Vol. 1, Chap. 2. In: Lovering DG and Gale RJ (eds), Springer, New York
10. Masset P, Guidotti RA (2007) Thermal activated (thermal) battery technology: Part II. Molten salt electrolytes. J Power Sour 164:397–41410.1016/j.jpowsour.2006.10.080 ↗
11. Swift G (2016) Li-Si-Sn alloy, anode material of the alloy, and batteries including same. US Patent 2016001349911
12. Choi Y, Cho S, Lee Y-S (2014) Effect of the addition of carbon black and carbon nanotube to FeS2 cathode on the electrochemical performance of thermal battery. J Ind Eng Chem 20:3584–358910.1016/j.jiec.2013.12.052 ↗
13. Czajka B, Zieliński M, Wojciechowska M, Tomska-Foralewska I (2014) Modification of MgO as an immobilizing agent for molten electrolyte. J Solid State Electr 18(8):2351–235810.1007/s10008-014-2523-y ↗
14. Czajka B, Wachowski L (2005) Some thermochemical properties of high calorific mixture of Fe-KClO4. Central Europ. J Energ Mater 2:55–68
15. King BV, Freund F (1984) Surface charges and subsurface space-charge distribution in magnesium oxides containing dissolved traces of water. Phys Rev B 29:5814–582510.1103/PhysRevB.29.5814 ↗
16. Dressler VL, Pozebon D, Flores ÉLM, Paniz JNG, Flores ÉMM (2003) Determination of fluoride in coal using pyrohydrolysis for analyte separation. J Braz Chem Soc 14:334–33810.1590/S0103-50532003000200024 ↗
17. Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquérol J, Sing KSW (2015) Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl Chem 87:1051–106910.1515/pac-2014-1117 ↗
18. Boch P, Claude J (2007) Ceramic material processes. Properties and applications. Niepce ISTE Ltd, Newport Bridge CA10.1002/9780470612415 ↗