journal article·2011-09

The effect of ball milling on the microstructure of powder metallurgy aluminium matrix composites reinforced with MoSi2 intermetallic particles

J. Corrochano, M. Lieblich, J. Ibáñez

Publisher page

Abstract

Six hot extruded Al-Mg-Si composites reinforced with 15 vol.% of MoSi 2 intermetallic particles were processed by powder metallurgy, varying reinforcement size and high energy ball milling time. The relation between these parameters and matrix microstructure, final reinforcement size and particle distribution has been investigated. Reinforcement distribution was quantified through the coefficient of variation of the mean near-neighbour distance, COV(λm), which demonstrated to be the most sensitive method to characterize this feature. The results show that by increasing milling time homogeneity of MoSi2 distribution significantly increased, achieving a COV(λm) = 0.41, independently of initial reinforcement size. Increasing milling time, the submicrometric matrix grains and reinforcing particles together with the homogeneous reinforcement distribution gave rise to higher tensile properties without loss of ductility. © 2011 Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Clyne · 1993
2. Chawla · 2006
3. Aluminium metal–matrix composites for automotive applications: tribological considerations10.1023/B:TRIL.0000044492.91991.f3 ↗
4. Dependency of physical and mechanical properties of mechanical alloyed Al–Al2O3 composite on milling time10.1016/j.matdes.2006.05.020 ↗
5. Influence of extrusion temperature on the microstructure and the texture of 6061Al–15vol.% SiCw PM composites10.1016/S0266-3538(02)00043-X ↗
6. Powder metal matrix composites: selection and processing10.1016/S0921-5093(97)00829-0 ↗
7. Enhanced mechanical properties of an Al based metal matrix composite prepared using mechanical alloying10.1016/S0921-5093(98)00676-5 ↗
8. Preparation and mechanical properties of SiC-reinforced Al6061 composite by mechanical alloying10.1016/j.msea.2008.05.004 ↗
9. Characterisation of severity of particle clustering and its effect on fracture of particulate MMCs10.1179/mst.1998.14.9-10.959 ↗
10. Mechanical alloying for the effective dispersion of sub-micron SiCp reinforcements in Al–Li alloy composite10.1016/S0921-5093(98)00566-8 ↗
11. Fabrication of A1–4.5Cu/15SiCp composites: I. processing using mechanical alloying10.1016/0924-0136(93)90108-I ↗
12. Synthesis and characterization of high volume fraction Al–Al2O3 nanocomposite powders by high-energy milling10.1016/j.msea.2006.03.066 ↗
13. Mechanically alloyed AlN particle-reinforced Al-6061 matrix composites: powder processing, consolidation and mechanical strength and hardness of the as-extruded materials10.1016/j.msea.2006.03.074 ↗
14. Nanocrystalline Al–Al2O3p and SiCp composites produced by high-energy ball milling10.1016/j.jmatprotec.2007.11.085 ↗
15. The effect of mechanical alloying on SiC distribution and the properties of 6061 aluminium composite10.1016/j.jmatprotec.2005.06.037 ↗
16. Improvement of microstructure and mechanical properties of AZ91/SiC composite by mechanical alloying10.1023/A:1004892610575 ↗
17. Mechanical properties of some P/M aluminide and silicide reinforced 2124 aluminium matrix composites10.1016/S1359-6462(02)00095-7 ↗
18. Lubricated sliding wear behaviour of aluminium alloy composites10.1016/j.wear.2005.01.001 ↗
19. Modelling the effect of particle clustering on the mechanical behaviour of SiC particle reinforced Al matrix composites10.1007/s10853-006-0100-1 ↗
20. A numerical investigation of the effect of particle clustering on the mechanical properties of composites10.1016/S1359-6454(03)00043-0 ↗
21. Quantification of particle distribution effects on fatigue in an Al–SiCp composite10.1016/j.msea.2003.11.043 ↗
22. Effect of spatial distribution of SiC particles on the tensile deformation behaviour of Al–10 vol%SiC composites10.2320/matertrans.48.171 ↗
23. Matrix grain characterisation by electron backscattering diffraction of powder metallurgy aluminium matrix composites reinforced with MoSi2 intermetallic particles10.1016/j.matchar.2010.08.010 ↗
24. The effect of melt flow on the dendrite morphology10.4028/www.scientific.net/MSF.508.169 ↗
25. On the role of matrix grain size and particulate reinforcement on the hardness of powder metallurgy Al–Mg–Si/MoSi2 composites10.1016/j.compscitech.2009.03.017 ↗
26. Secondary phase distribution analysis via finite body tessellation10.1046/j.1365-2818.1999.00483.x ↗
27. Use of the dirichlet tessellation for characterising and modelling nonregular dispersions of second-phase particles10.1016/0026-0800(83)90043-5 ↗
28. Simulation and quantitative assessment of homogeneous and inhomogeneous particle distributions in particulate metal matrix composites10.1046/j.1365-2818.2001.00766.x ↗
29. Aluminium–lithium/SiCp composites produced by mechanically milled powders10.1016/S0924-0136(96)02809-9 ↗
30. Production of Al–20 wt.% Al2O3 composite powder using high energy milling10.1016/j.powtec.2009.01.016 ↗
31. Effect of mechanical alloying on the morphology, microstructure and properties of aluminium matrix composite powders10.1016/S0921-5093(02)00246-0 ↗
32. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
33. The effect of coarse second-phase particles on the rate of grain refinement during severe deformation processing10.1016/S1359-6454(03)00086-7 ↗
34. Anisotropy in the microstructure and mechanical properties of P/M 7091 aluminium alloy10.1016/0254-0584(94)90174-0 ↗
36. Microstructural evolution during recovery and recrystallization of a nanocrystalline Al–Mg alloy prepared by cryogenic ball milling10.1016/S1359-6454(03)00083-1 ↗
37. Synthesis of nanostructured materials by mechanical milling: problems and opportunities10.1016/S0965-9773(97)00014-7 ↗
38. Transition of tensile deformation behaviours in ultrafine-grained aluminium10.1016/j.actamat.2005.05.005 ↗
39. An effect of grain size upon creep cavitation and ductility in copper10.1016/0036-9748(69)90063-5 ↗
40. Strength and ductility of ultrafine grained aluminium and iron produced by ARB and annealing10.1016/S1359-6462(02)00282-8 ↗
41. Size dependent strengthening in particle reinforced aluminium10.1016/S1359-6454(01)00327-5 ↗
42. Influence of damage on the tensile behaviour of pure aluminium reinforced with ⩾40 vol. pct alumina particles10.1016/S1359-6454(01)00279-8 ↗