Phosphotungestic acid supported mesoporous MCM-41 coated NiFe2O4 magnetic nanoparticles as highly effective green nanocatalysts for coumarin and xanthene synthesis
Source abstract
Abstract
Phosphotungestic acid (PWA) supported on mesoporous MCM-41 coated NiFe2O4 magnetic nanoparticles were prepared to be used as efficient and recyclable heterogeneous catalysts for the synthesis of coumarin and xanthene derivatives. The prepared catalysts can be easily recovered and reused for four times without significant decrease in the catalytic activity. The simple recovery of the catalyst is occurred by using an external magnet. The catalysts have notable advantages in addition to easily isolation process from the reaction medium such as easy preparation, simple procedures, high stability, well catalytic performance, low reaction time and green reaction conditions. These advantages make them very good heterogenous catalysts from an economic and environmental point of view. The catalysts were fully characterized by XRD, FT-IR, SEM, EDS, TEM, XPS, and VSM analyses. XPS confirmed the presence of inverse cubic spinel phase of NiFe2O4 and the contribution of Fe(III) − O and Ni(II) − O bonds in tetrahedral (Th) and octahedral (Oh) sites. PWA was found to be well dispersed inside and outside the pores of MCM-41 and/or NF-MCM-41 that enhanced both the surface acidity and the catalytic activity. The catalyst 55 W/NF-MCM-41-II exhibited the highest acidity (Ei = 592.4 mV) and catalytic activity toward the synthesis of 14-aryl-14H-dibenzo[a,j]xanthene (94.7%) and 7-hydroxy-4-methyl coumarin (82.1%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Multicomponent Synthesis of Heterocycles · Polyoxometalates: Synthesis and Applications · Chemical Synthesis and Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Mozafari R, Heidarizadeh F, Nikpou F (2019) MnFe2O4 magnetic nanoparticles modified with chitosan polymeric and phosphotungstic acid as a novel and highly effective green nanocatalyst for regio- and stereoselective synthesis of functionalized oxazolidin-2-ones. Mater Sci Eng C 105:11010910.1016/j.msec.2019.110109 ↗
2. Sikarwar P, Kumar UKA, Gosu V, Subbaramaiah V (2018) Catalytic oxidative desulfurization of DBT using green catalyst (Mo/MCM-41) derived from coal fly ash. J Environ Chem Eng 6:1736–174410.1016/j.jece.2018.02.021 ↗
3. Teimouri A, Mahmoudsalehi M, Salavati H (2018) Catalytic oxidative desulfurization of dibenzothiophene utilizing molybdenum and vanadium oxides supported on MCM-41. Int J hydrogen energy 43:14816–1483310.1016/j.ijhydene.2018.05.102 ↗
4. Pan G-Y, Ma Y-L, Ma X-X, Sun Y-G, Lv J-M, Zhang J-L (2016) Catalytic hydrogenation of corn stalk into polyol over Ni–W/MCM-41 catalyst. Chem Eng J 299:386–39210.1016/j.cej.2016.04.074 ↗
5. Gawande MB, Rathi AK, Branco PS, Nogueira ID, Velhinho A, Shrikhande JJ, Indulkar UU, Jayaram RV, Ghumman CAA, Bundaleski N, Teodoro OMND (2012) Regio- and Chemoselective Reduction of Nitroarenes and Carbonyl Compounds over Recyclable Magnetic Ferrite-Nickel Nanoparticles (Fe3O4-Ni) by Using Glycerol as a Hydrogen Source. Chem Eur J 18:12628–1263210.1002/chem.201202380 ↗
6. Gawande MB, Bonifácio VDB, Varma RS, Nogueira ID, Bundaleski N, Ghumman CAA, Teodoro OMND, Branco PS (2013) Magnetically recyclable magnetite–ceria (Nanocat-Fe-Ce) nanocatalyst – applications in multicomponent reactions under benign conditions. Green Chem 15:1226–123110.1039/c3gc40375k ↗
7. Baig RBN, Varma RS (2013) Magnetically retrievable catalysts for organic synthesis. Chem Commun 49:752–77010.1039/C2CC35663E ↗
8. Rossi LM, Costa NJS, Silva FP, Wojcieszak R (2014) Magnetic nanomaterials in catalysis: advanced catalysts for magnetic separation and beyond. Green Chem 16:2906–293310.1039/c4gc00164h ↗
9. Hudson R, Feng Y, Varma RS, Moores A (2014) Bare magnetic nanoparticles: sustainable synthesis and applications in catalytic organic transformations. Green Chem 16:4493–445010.1039/C4GC00418C ↗
10. Nasseri MA, Zakerinasab B, Samieadel MM (2014) Sulfamic acid supported on Fe3O4@SiO2 superpara magnetic nanoparticles as a recyclableheterogeneous catalyst for the synthesis of quinolines. RSC Adv 4:41753–4176210.1039/C4RA06699E ↗
11. Taheri S, Veisi H, Hekmati M (2017) Application of polydopamine sulfamic acid-functionalized magnetic Fe3O4 nanoparticles (Fe3O4@PDA-SO3H) as a heterogeneous and recyclable nanocatalyst for the formylation of alcohols and amines under solvent-free conditions. New J Chem 41:5075–508110.1039/C7NJ00417F ↗
12. Wu W, He Q, Jiang C (2008) Magnetic Iron Oxide Nanoparticles: Synthesis and Surface Functionalization Strategies. Nanoscale Res Lett 3:397–41510.1007/s11671-008-9174-9 ↗
13. Li W, Qi H, Guo F, Niu X, Du Y, Chen Y (2019) NiFe2O4 nanoparticles supported on cotton-based carbon fibers and their application as a novel broadband microwave absorbent. RSC Adv 9:29959–2996610.1039/C9RA05844C ↗
14. Kooti M, Nasiri E (2015) Phosphotungstic acid supported on silica-coated CoFe2O4 nanoparticles: An efficient and magnetically-recoverable catalyst for Nformylation of amines under solvent-free conditions. J Mol Catal A: Chem 406:168–17710.1016/j.molcata.2015.05.009 ↗
15. Wang T, Zhang L, Wang H, Yang W, Fu Y, Zhou W, Yu W, Xiang K, Su Z, Dai S, Chai L (2013) Controllable Synthesis of Hierarchical Porous Fe3O4 Particles Mediated by Poly(diallyldimethylammonium chloride) and Their Application in Arsenic Removal. ACS Appl Mater Interfaces 5:12449–1245910.1021/am403533v ↗
16. Saiz J, Bringas E, Ortiz I (2014) Functionalized magnetic nanoparticles as new adsorption materials for arsenic removal from polluted waters. J Chem Technol Biotechnol 89:909–91810.1002/jctb.4331 ↗
17. Liu K, Wei W-Z, Zeng J-X, Liu X-Y, Gao Y-P (2006) Application of a novel electrosynthesized polydopamine-imprinted film to the capacitive sensing of nicotine. Anal Bioanal Chem 385:724–72910.1007/s00216-006-0489-z ↗
18. Chen B, Zhu Z, Ma J, Yang M, Hong J, Hu X, Qiu Y, Chen J (2014) One-pot, solid-phase synthesis of magnetic multiwalled carbon nanotube/iron oxide composites and their application in arsenic removal. J Colloid Interface Sci 434:9–1710.1016/j.jcis.2014.07.046 ↗
19. Wang X, Lv T, Wu M, Sui J, Liu Q, Liu H, Huang J, Jia L (2019) Aluminum doped solid acid with suitable ratio of Brønsted and Lewis acid sites synthesized by electric-flocculation of phosphotungstic acid via hydrothermal treatment for producing 5-hydroxymethylfurfural from glucose. Appl Catal A: Gen 574:87–9610.1016/j.apcata.2019.02.005 ↗
20. Ding J, Cui M, Ma T, Shao R, Xu W, Wang P (2018) Catalytic amination of glycerol with dimethylamine over different type ofheteropolyacid/Zr-MCM-41. catalysts Mol Catal 457:51–5810.1016/j.mcat.2018.07.017 ↗
21. Farsani MR, Jalilian F, Yadollahi B, Rudbari HA (2015) Comparison between various Keggin and Wells–Dawson sandwich-type polyoxometalates in catalytic oxidation of cyclooctene and cyclohexene with hydrogen peroxide. Appl Organometal Chem 29:7–1110.1002/aoc.3235 ↗
22. Sanchez LM, Sathicq ÁG, Baronetti GT, Thomas HJ, Romanelli GP (2014) Vanadium-Substituted Wells-Dawson Heteropolyacid as Catalyst for Liquid Phase Oxidation of 1,4-Dihydropyridine Derivative. Catal Lett 144:172–18010.1007/s10562-013-1111-6 ↗
23. Bennardi DO, Romanelli GP, Sathicq ÁG, Autino JC, Baronetti GT, Thomas HJ (2011) Wells–Dawson heteropolyacid as reusable catalyst for sustainable synthesis of flavones. Appl Catal A: Gen 404:68–73
24. Ahmed AI, El-Hakam SA, Abd Elghany MA, Abo El-Yazeed WS (2011) Synthesis and characterization of new solid acid catalysts, H3PW12O40 supported on nanoparticle tin oxide: An efficient catalyst for the preparation of 7-hydroxy-4-methylcoumarin Appl Catal A: Gen 407:40–4810.1016/j.apcata.2011.08.020 ↗
25. Ahmed AI, Samra SE, El-Hakam SA, Khder AS, El-Shenawy HZ, Abo El-Yazeed WS (2013) Characterization of 12-molybdophosphoric acid supported on mesoporous silica MCM-41 and its catalytic performance in the synthesis of hydroquinone diacetate Appl Surf Sci 282:217–22510.1016/j.apsusc.2013.05.105 ↗
26. Ahmed AI, El-Hakam SA, Khder AS, Abo El-Yazeed WS (2013) Nanostructure sulfated tin oxide as an efficient catalyst for the preparation of 7-hydroxy-4-methyl coumarin by Pechmann condensation reaction J Mol Catal A: Chem. 366:99–10810.1016/j.molcata.2012.09.012 ↗
27. Abo El-Yazeed WS, Abou El-Reash YG, Elatwy LA, Ahmed AI (2020) Facile fabrication of bimetallic Fe–Mg MOF for the synthesis of xanthenes and removal of heavy metal ions. RSC Adv 10:9693–970310.1039/C9RA10300G ↗
28. Salama RS, Hassan SM, Ahmed AI, Abo El-Yazeed WS, Mannaa MA (2020) The role of PMA in enhancing the surface acidity and catalytic activity of a bimetallic Cr–Mg-MOF and its applications for synthesis of coumarin and dihydropyrimidinone derivatives. RSC Adv 10:21115–2112810.1039/D0RA03591B ↗
29. Abo El-Yazeed WS, Abou El-Reash YG, Elatwy LA, Ahmed AI (2020) Novel bimetallic Ag-Fe MOF for exceptional Cd and Cu removal and 3,4-dihydropyrimidinone synthesis. J. Taiwan Institute of Chemical Engineers 114:199–21010.1016/j.jtice.2020.09.028 ↗
30. Abo El-Yazeed WS, Eladl M, Ahmed AI, Ibrahim AA (2020) Sulfamic: acid incorporated tin oxide: Acidity and activity relationship. J. Alloys and Comp. 858:15819210.1016/j.jallcom.2020.158192 ↗
31. Amini A, Fallah A, Chenge C, Tajbakhsh M (2018) Natural phosphate-supported Cu(II), an efficient and recyclable catalyst for the synthesis of xanthene and 1,4-disubstituted-1,2,3-triazole derivatives. RSC Adv 8:41536–4154710.1039/C8RA08260J ↗
32. Emami S, Dadashpour S (2015) Current developments of coumarin-based anti-cancer agents in medicinal chemistry, Eur. J Med Chem 102:611–63010.1016/j.ejmech.2015.08.033 ↗
33. Murthy YLN, Rajack A, Yuvaraj K (2016) Solvent free synthesis of 3,4-dihydropyrimidine-2-(1H)-ones/thiones catalyzed by N,Obis(trimethylsilyl)acetamide and dicyclohexyl carbodiimide, Arab. J Chem 9:S1740–S1746
34. Wang Y, Wang W, Zhu M, Yu D (2017) Electromagnetic wave absorption polyimide fabric prepared by coating with core–shell NiFe2O4@PANI nanoparticles. RSC Adv 7:42891–4289910.1039/C7RA08002F ↗
35. Anupama AV, Kumaran V, Sahoo B (2018) Application of Ni-Zn ferrite powders with polydisperse spherical particles in magnetorheological fluids. Powder Technol 338:190–19610.1016/j.powtec.2018.07.008 ↗
36. Liu A, Zhang Z, Fang Z, Liu B, Huang K (2014) Synthesis of 5-ethoxymethylfurfural from 5-hydroxymethylfurfural and fructose in ethanol catalyzed by MCM-41 supported phosphotungstic acid. J Indust Eng Chem 20:1977–198410.1016/j.jiec.2013.09.020 ↗
37. Li SW, Gao RM, Zhang RL, Zhao JS (2016) Template method for a hybrid catalyst material POM@MOF-199 anchored on MCM-41: Highly oxidative desulfurization of DBT under molecular oxygen. Fuel 184:18–2710.1016/j.fuel.2016.06.132 ↗
38. Houshiar M, Jamilpanah L (2018) Effect of Cu dopant on the structural, magnetic and electrical properties of Ni-Zn ferrites. Mater Res Bull 98:213–21810.1016/j.materresbull.2017.10.024 ↗
39. Kombaiah K, Vijaya JJ, Kennedy LJ, Bououdina M (2016) Comparative investigation on the structural, morphological, optical, and magnetic properties of CoFe2O4 nanoparticles. Ceramics Inter 42:2741–274910.1016/j.ceramint.2015.11.003 ↗
40. Ramakrishna A, Murali N, Margarette SJ, Mammo TW, Joythi NK, Sailaja B, Kumari CCS, Samatha K, Veeraiah V (2018) Studies on structural, agnetic, and DC electrical resistivity properties of Co0.5M0.37Cu0.13Fe2O4 (M = Ni, Zn and Mg) ferrite nanoparticle systems. Advanced Powder Technol 29:2601–260710.1016/j.apt.2018.07.005 ↗
41. Shen H, Li Y, Huang S, Cai K, Cheng Z, Lv J, Ma X (2019) The carbonylation of dimethyl ether catalyzed by supported heteropoly acids: The role of Brønsted acid properties. Catal Today 330:117–12310.1016/j.cattod.2018.04.001 ↗
42. Tedjieukeng HMK, Tsobnang PK, Fomekong RL, Etape EP, Joy PA, Delcorte A, Lambi JN (2018) Structural characterization and magnetic properties of undoped and copper-doped cobalt ferrite nanoparticles prepared by the octanoate coprecipitation route at very low dopant concentrations. RSC Adv 8:38621–3863010.1039/C8RA08532C ↗
43. O-Quiñonez J-L, Pal U, Villanueva MS (2018) Structural, Magnetic, and Catalytic Evaluation of Spinel Co, Ni, and Co–Ni Ferrite Nanoparticles Fabricated by Low-Temperature Solution Combustion Process. ACS Omega 3:14986–1500110.1021/acsomega.8b02229 ↗
44. Fu H, Ding X, Ren C, Li W, Wua H, Yangab H (2017) Preparation of magnetic porous NiFe2O4/SiO2 composite xerogels for potential application in adsorption of Ce(IV) ions from aqueous solution. RSC Advances. 7:16513–1652310.1039/C6RA27219C ↗
45. Chen J, Yu D, Liao W, Zheng M, Xiao L, Zhu H, Zhang M, Du M, Yao J (2016) WO3–x Nanoplates Grown on Carbon Nanofibers for an Efficient Electrocatalytic Hydrogen Evolution Reaction. ACS Appl Mater Interfaces 8:18132–1813910.1021/acsami.6b05245 ↗
46. Hassan SM, Ahmed AI, Mannaa MA (2018) Structural, photocatalytic, biological and catalytic properties of SnO2/TiO2 nanoparticles. Ceram Int 44:6201–621110.1016/j.ceramint.2018.01.005 ↗
47. Kim S, Kang D, Lee C-H, Lee PH (2012) Synthesis of Substituted Coumarins via Brønsted Acid Mediated Condensation of Allenes with Substituted Phenols or Anisoles. J Org Chem 77:6530–653710.1021/jo301086k ↗
48. Sajjadifar S, Fadaeian M, Bakhtiyari M, Rezayati S (2014) One-pot synthesis of xanthene derivatives using silica supported [2-(Sulfooxy) ethyl] sulfamic Acid as a novel and efficient catalyst under solvent-free condition. Chem Sci Transact 3:107–116
49. Kaid MM, Gebreil A, El-Hakam SA, Ahmed AI, Ibrahim AA (2020) Sulfamic acid incorporated HKUST-1: a highly active catalyst and efficient adsorbent. RSC Adv 10:15586–1559710.1039/D0RA01063D ↗
50. Das S, Majee A, Hajra A (2011) A convenient synthesis of coumarins using reusable ionic liquid as catalyst. Green Chem Lett Rev 4:349–35310.1080/17518253.2011.572296 ↗
51. El-Hakam SA, Samra SE, El-Dafrawy SM, Ibrahim AA, Salama RS, Ahmed AI (2018) Synthesis of sulfamic acid supported on Cr-MIL-101 as a heterogeneous acid catalyst and efficient adsorbent for methyl orange dye. RSC Adv 8:20517–2053310.1039/C8RA02941E ↗
52. Rajitha B, Kumar VN, Someshwar P, Madhav JV, Reddy PN, Reddy YT (2006) Dipyridine copper chloride catalyzed coumarin synthesis via Pechmann condensation under conventional heating and microwave irradiation. ARKIVOC 2006:23–2710.3998/ark.5550190.0007.c02 ↗
53. Reddy BM, Reddy VR, Giridhar D (2001) Synthesis of Coumarins Catalyzed by Eco-friendly w/zro2 Solid Acid Catalyst. Synth Commun 31:3603–360710.1081/SCC-100107007 ↗
54. Safari J, Aftabi P, Ahmadzadeh M, Sadeghi M, Zarnegar Z (2017) Sulfonated starch nanoparticles: An effective, heterogeneous and bio-based catalyst for synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes. J Mol Struct 1142:33–3910.1016/j.molstruc.2017.02.095 ↗
55. Mondal J, Nandi M, Modak A, Bhaumik A (2012) Functionalized mesoporous materials as efficient organocatalysts for the syntheses of xanthenes. J Mol Catal A: Chem 363:254–26410.1016/j.molcata.2012.06.017 ↗
56. Shirini F, Abedini M, Pourhasan R (2013) N-sulfonic acid poly(4-vinylpyridinium) chloride: A novel polymeric and reusable catalyst for the preparation of xanthenes derivatives. Dyes Pigm 99:250–25510.1016/j.dyepig.2013.04.036 ↗
57. Seyyedhamzeh M, Mirzaei P, Bazgir A (2008) Solvent-free synthesis of aryl-14H-dibenzo[a,j]xanthenes and 1,8-dioxo-octahydro-xanthenes using silica sulfuric acid as catalyst. Dyes Pigm 76:836–83910.1016/j.dyepig.2007.02.001 ↗
58. Madhava JV, Reddy YT, Reddy PN, Reddy MN, Kuarma S, Crooks PA, Rajitha B (2009) Cellulose sulfuric acid: An efficient biodegradable and recyclable solid acid catalyst for the one-pot synthesis of aryl-14H-dibenzo[a.j]xanthenes under solvent-free conditions. J Mol Catal A: Chem 304:85–8710.1016/j.molcata.2009.01.028 ↗
59. Amini MM, Fazaeli Y, Yassaee Z, Feizi S, Bazgir A (2009) Polytungstozincate Acid: A New and Efficient Catalyst for the Synthesis of Xanthenes Under Solvent-Free Conditions. Open Catal J 2:40–4410.2174/1876214X00902010040 ↗