Influence of pH of solution on phase composition of samarium-strontium cobaltite powders synthesized by wet chemical technique
Source abstract
Abstract
Powders of Sm0.6Sr0.4CoO3-δ and La0.6Sr0.4CoO3-δ were synthesized using wet chemical technique. Structural and surface properties of synthesized materials were studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), IR spectroscopy, and scanning electron microscopy (SEM). The influence of pH on the phase state, chemical composition, morphology, and fractal dimension of the synthesized powders were investigated. It was found that the change of pH has the influence on phase composition of synthesized powders. The increase of solution pH allows one to obtain homogeneous samples at lower temperatures down to 900–950 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Thermal and Kinetic Analysis · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Shao Z, Zhou W, Zhu Z (2012) Prog Mater Sci 57:804–874. https://doi.org/10.1016/j.pmatsci.2011.08.00210.1016/j.pmatsci.2011.08.002 ↗
2. Del Toro R, Hernández P, Díaz Y, Brito JL (2013) Synthesis of La0.8Sr0.2FeO3 perovskites nanocrystals by Pechini sol–gel method. Mater Lett 107:231–23410.1016/j.matlet.2013.05.139 ↗
3. Bansal NP, Wise B (2011) NASA/TM 2011–217222:1–10
4. Bansal NP, Zhong Z (2005) NASA/TM 2005–213897:1–10
5. Söderlind F, Colloidal synthesis of metal oxide nanocrystals and thin films, Dissertation No. 1182, Printed by LiU-Tryck, Linköping, Sweden (2008)
6. Sevastyanov VG, Simonenko EP, Simonenko NP, Sakharov KA, Kuznetsov NT (2013) Mendeleev Commun 23(1):17–1810.1016/j.mencom.2013.01.005 ↗
7. Sevastyanov VG, Simonenko EP, Simonenko NP, Stolyarova VL, Lopatin SI, Kuznetsov NT (2015) Mater Chem Phys 153:78–8710.1016/j.matchemphys.2014.12.037 ↗
8. Agarwal S, Samanta SB, Sharma GL (2004) Thin Solid Films 447–448:502–50810.1016/j.tsf.2003.06.001 ↗
9. Goktas A, Mutlu IH, Yamada Y, Celik E (2013) J Alloy Compd 553:259–26610.1016/j.jallcom.2012.11.097 ↗
10. Jaramillo J, Garzón BA, L. Tirado Mejía, J. Phys.: Conf. Series 687, 012099 (2016). https://doi.org/10.1088/1742-6596/687/1/01209910.1088/1742-6596/687/1/012099 ↗
11. Guo Y, Chen D, Ran R, Shao Z (2011) Electrochim Acta 56:2870–287610.1016/j.electacta.2010.12.075 ↗
12. van Doorn RHE, Kruidhof H, Nijmeijer A, Winnubst L, Burggraaf AJ (1998) J Mater Chem 8(9):2109–211210.1039/a800500a ↗
13. Channu V, Holze R, Walker E (2013) New J Glass Ceram 3(1):29–3310.4236/njgc.2013.31005 ↗
14. Wang S (2013) Preparation, characterization and application of novel proton conducting ceramics. Doctoral dissertation, South Carolina, US, http://scholarcommons.sc.edu/etd/2335
15. Accardo G, Ferone C, Cioffi R, Frattini D, Spiridigliozzi L, Dell’Agli G (2016) J Appl Biomater Funct Mater 14(1):e35–e41
16. Kawai K, Fukuda T, Nakano Y, Takeshita K (2016) EPJ Nucl Sci Technol 44:1–7
17. Rout SK, Synthesis, Electrical and Electrochemical Behavior of Lanthanum Strontium Cobalt Ferrite for SOFC Cathode Applicatio, Ph.D Thesis, National Institute of Technology, Rourkela, India (2015)
18. Samat AA, Ishak MAM, Osman N (2015) J. Intelek. UiTM Perlis 7(2):1–8
19. Singh R, Yadav AK, Gautam Ch (2011) J Sens Tech 1:116–124. https://doi.org/10.4236/jst.2011.1401610.4236/jst.2011.14016 ↗
20. Huízar-Félix AM, Hernández T, de la Parra S, Ibarra J, Kharisov B (2012) Powder Technol 229:290–29310.1016/j.powtec.2012.06.057 ↗
21. Ianculescu A, Brãileanu A, Zaharescu M, Guillemet S, Pasuk I, Madarász J, Pokol G (2003) J Therm Anal Calorim 72:173–18010.1023/A:1023975904764 ↗
22. Niwa E, Sato K, Yashiro K, Mizusaki J (2009) ECS Trans 16(44):205–210. https://doi.org/10.1149/1.322475810.1149/1.3224758 ↗
23. Scurtu R, Somacescu S, Calderon-Moreno JM, Culita D, Bulimestru I, Popa N, Gulea A, Osiceanu P (2014) J Solid State Chem 210:53–5910.1016/j.jssc.2013.10.044 ↗
24. Yang X, Luo L, Zhong H (2004) React Kinet Catal Lett 81(2):219–22710.1023/B:REAC.0000019426.76399.e9 ↗
25. Chang J, Sun J, Xu Ch, Xu H, Gao L (2012) Nanoscale 4:6786–679110.1039/c2nr31725g ↗
26. Dong Y, He K, Yin L, Zhang A (2007) Nanotechnology 18:435602. (6p.)10.1088/0957-4484/18/43/435602 ↗
27. Choi E-J, Huh Y-D (2009) Bull Korean Chem Soc 30(9):2132–213410.5012/bkcs.2009.30.9.2132 ↗
28. Li L, Lin R, Tong Z, Feng Q (2012) Nanoscale Res Lett 7:305. (5p.)10.1186/1556-276X-7-305 ↗
29. Sh. Wu, Sh. Yin, H. Cao YLu, Yin J, Li B (2011) J Mater Chem 21:8734–874110.1039/c0jm04535g ↗
30. Magalhães F, Moura FCC, Ardisson JD, Lago RM (2008) Mater Res 11(3):307–31210.1590/S1516-14392008000300013 ↗
31. J Hayd Nanoskalige Kathoden für den Einsatz in Festelektrolyt-Brennstoffzellen bei abgesenkten Betriebstemperaturen (Nanoscale cathodes for use in solid electrolyte fuel cells at lowered operating temperatures), Dissertation, Karlsruhe, Germany (2012) [in German]
32. Samat AA,Somalu MR, Muchtar A, Osman N, (2016) Malaysian J Anal Sci 20(6):1458–146610.17576/mjas-2016-2006-26 ↗
33. Hu Ch, Liu H, Dong W, Zhang Y, Bao G, Lao Ch, Wang ZhL (2007) Adv Mater 19:470–47410.1002/adma.200601300 ↗
34. Macedo AD, Cesário MR, Souza GL, Cela B, Paskocimas CA, Martinelli AE, Melo DMA, Nascimento RM, Chapter 20. In: Prof. Th. Theophile (ed) Infrared spectroscopy – materials science, engineering and technology, pp. 383–404, InTech, Rijeka, Croatia (2012)
35. Tatzber M, Stemmer M, Spiegel H, Katzlberger C, Haberhauer G, Gerzabek MH (2007) Environ Chem Lett 5:9–1210.1007/s10311-006-0079-5 ↗
36. Salavati-Niasaria M, Hosseinzadeh G, Davar F (2011) J Alloy Compd 509:134–14010.1016/j.jallcom.2010.09.006 ↗
37. Jeevanandam P, Koltypin Yu, Palchik O, Gedanken A (2001) J Mater Chem 11:869–87310.1039/b007370i ↗
38. Ptáček P, Bartoníčková E, Švec J, Opravil T, Šoukal F, Frajkorová F (2015) Ceram Int 41:115–12610.1016/j.ceramint.2014.08.043 ↗
39. Sreedhar B, Sulochana M, Satya Vani Ch, Keerthi Devi D, Naidu NVS (2014) Eur Chem Bull 3(3):234–239
40. Makhloufi S, M Omari M (2015) J Inorg Organomet Polym 1–9 (2015). https://doi.org/10.1007/s10904-015-0295-110.1007/s10904-015-0295-1 ↗
41. Chen L, Lu C, Lu Yi, Fang Zh, Ni Y, Xu Zh (2013) RSC Adv 3:3967–397210.1039/c3ra21711f ↗
42. Njoku CB, Omondi BO, Ndungu PG (2015) ECS Trans 68(1):903–917. https://doi.org/10.1149/06801.0903ecst10.1149/06801.0903ecst ↗
43. Hussein GAM (1994) J Chem Soc Faraday Trans 90(24):3693–369710.1039/ft9949003693 ↗
44. Ouzaouit K, Bakiz B, Villain S, Benlhachemi A, Essoumhi A, Benyaich H, Guinneton F, Gavarri J-R, Conf Paper Inśynieria Materiałow NR 3-4, pp. 330–333, Zakopane, Poland (2007)
45. Gwyddion – data analysis software: http://gwyddion.net
46. Ponomareva A, Moshnikov VA, Suchaneck G, Chapter 11. In: M Aliofkhazraei (ed) Handbook of functional nanomaterials. Volume 2 – characterization and reliability, pp. 265–293, Nova Science Publishers, Hauppauge (NY) (2013)
47. Suchaneck G, Ponomareva AA, Brychevskyi M, Brodnikovskyi I, Vasylyev O, Gerlach G (2013) Solid State Phenom 200:293–29810.4028/www.scientific.net/SSP.200.293 ↗
48. Dinescu R, Preda M (1973) J Therm Anal 5:465–47310.1007/BF01950236 ↗
49. Wang J, Johnson C, McGraw AC, Wu NN (2007) ECS T 6(11):1–10. https://doi.org/10.1149/1.279040910.1149/1.2790409 ↗