Surface Properties of Polydimethylsiloxane-Based Inorganic/Organic Hybrid Films Deposited on Polyimide Sheets by the Sol-Gel Method

Polydimethylsiloxane (PDMS)-based inorganic/organic hybrids films were prepared on polyimide sheets by the sol-gel method using silanol-terminated PDMS and titanium tetraisopropoxide as starting materials. The effect of heat-treatment temperature on the surface property of the hybrid films was examined in terms of contact angle of water and Tapping-Mode Atomic Force Microscopy (AFM). AFM phase images showed the presence of domains, 200–500 nm in size, on the surface of these films after heat-treatment below 300°C. These regions were more hydrophilic than the rest of the area. The domains disappeared at 300°C and the surface became homogeneous surface of the peak to valley value, about 10 nm. It is also uniformly hydrophobic and a maximum contact angle (about 115°C) was obtained.