Largely enhanced mechanical and dielectric properties of paper-based composites via in situ modification of polyimide fibers with SiO2 nanoparticles
Source abstract
Abstract
In this study, SiO2 nanoparticles were in situ grown onto the surfaces of polyimide fibers via sol–gel synthesis and the corresponding paper-based composites were fabricated by wet-forming process using the as-obtained fibers as the starting materials. A simultaneous enhancement of the tensile and tearing index as well as the interlayer bonding strength of paper-based composites could be achieved with an increment of 17.7%, 17.2% and 50%, respectively. What is more, the dielectric strength of the resultant composites increased by 127% compared with the pristine paper-based composites. The results indicated that the SiO2 nanoparticles could be used as an excellent interfacial linker between the fibers and polymer matrix, and a smart cushion to release interior and exterior applied forces. Besides, satisfactory results on thermal stability of paper-based composites were attained after coated with SiO2 nanoparticles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Synthesis and properties of polymers · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Khazaka R, Locatelli ML, Diaham S, Bidan P (2013) Endurance of thin insulation polyimide films for high-temperature power module applications. IEEE Trans Compon Packag Manuf Technol 3:811–81710.1109/TCPMT.2013.2249559 ↗
2. Yang Y, He J, Wu G, Hu J (2015) “Thermal Stabilization Effect” of Al2O3 nano-dopants improves the high-temperature dielectric performance of polyimide. Sci Rep 5:16986–1699510.1038/srep16986 ↗
3. Yin F, Tang C, Li X (2017) Effect of moisture on mechanical properties and thermal stability of meta-aramid fiber used in insulating paper. Polymers 9:537–55010.3390/polym9100537 ↗
4. Yang B, Zhang MY, Lu ZQ (2018) From poly (p-phenylene terephthalamide) broken paper: high-performance aramid nanofibers and their application in electrical insulating nanomaterials with enhanced properties. ACS Sustain Chem Eng 6:8954–896310.1021/acssuschemeng.8b01311 ↗
5. Cao L, Sun Q, Wang H, Zhang X, Shi H (2015) Enhanced stress transfer and thermal properties of polyimide composites with covalent functionalized reduced graphene oxide. Compos Part A 68:140–14810.1016/j.compositesa.2014.10.007 ↗
6. Naito K (2014) Tensile properties of polyimide composites incorporating carbon nanotubes-grafted and polyimide-coated carbon fibers. J Mater Eng Perform 23:3245–325610.1007/s11665-014-1110-9 ↗
7. Xu W, Ding Y, Jiang S, Chen L, Liao X, Hou H (2014) Polyimide/BaTiO3/MWCNTs three-phase nanocomposites fabricated by electrospinning with enhanced dielectric properties. Mater Lett 135:158–16110.1016/j.matlet.2014.07.157 ↗
8. Jiang C, Han E, Wang X (2017) Effect of discontinuous long polyimide fiber on mechanical properties, fracture morphology, and crystallization behaviors of polyamide-6 matrix composites. J Thermoplast Compos Mater 31:1826–1839
9. García JM, García FC, Serna F (2010) High-performance aromatic polyamides. Prog Polym Sci 35:623–68610.1016/j.progpolymsci.2009.09.002 ↗
10. Liu C, Zheng Y, Yang P (2016) The DC surface flashover performance research of polyimide under low-energy electron irradiation environment. IEEE Trans Plasma Sci 44:85–9210.1109/TPS.2015.2504598 ↗
11. Li J, Zhang G, Li J (2017) Preparation and properties of polyimide/chopped carbon fiber composite foams. Polym Adv Technol 28:3851–3857
12. Huang J, Zhou Y, Dong L (2017) Enhancement of mechanical and electrical performances of insulating presspaper by introduction of nanocellulose. Compos Sci Technol 138:40–4810.1016/j.compscitech.2016.11.020 ↗
13. Borch J (2001) Handbook of physical testing of paper. J Pharm Sci 101:4067–4074
14. Moosburger-Will J, Jã¤Ger J, Strauch J, Bauer M, Strobl S, Linscheid FF, Horn S (2017) Interphase formation and fiber matrix adhesion in carbon fiber reinforced epoxy resin: influence of carbon fiber surface chemistry. Compos Interfaces 24:691–71010.1080/09276440.2017.1267513 ↗
15. Zhang Y, Zhang L, He J, Chen C, Cheng L, Yin X, Liu Y (2017) Strengthening and toughening of 2D C/SiC z-pinned joint via fiber bridging mechanism. Ceram Int 44:1156–116210.1016/j.ceramint.2017.10.093 ↗
16. Chen L, Long Z, Zhang Y, Wang S, Li Z, Guo S, Wang B (2017) Modification of dry-spun Suplon polyimide fibers by mixed‐acid oxidation and their effects on the properties of polypropylene-resin-based composites. J Appl Polym Sci 134:44932–4494010.1002/app.44932 ↗
17. Mu S, Wu Z, Qi S, Wu D, Yang W (2010) Preparation of electrically conductive polyimide/silver composite fibers via in-situ surface treatment. Mater Lett 64:1668–167110.1016/j.matlet.2010.05.005 ↗
18. Sa R, Yan Y, Wei Z, Zhang L, Wang W, Tian M (2014) Surface modification of aramid fibers by bio-inspired poly(dopamine) and epoxy functionalized silane grafting. Acs Appl Mater Interfaces 6:21730–2173810.1021/am507087p ↗
19. Sun SP, Wei M, Olson JR, Shaw MT (2009) Alkali etching of a poly(lactide) fiber. Acs Appl Mater Interfaces 1:1572–157810.1021/am900227f ↗
20. Sun X, Bu J, Liu W, Niu H, Qi S, Tian G, Wu D (2015) Surface modification of polyimide fibers by oxygen plasma treatment and interfacial adhesion behavior of a polyimide fiber/epoxy composite. Sci Eng Com Mater 24:477–48410.1515/secm-2015-0092 ↗
21. Wang YF, Sun J, Dai LX (2017) The properties of polyimide fibers modified by functionalized muti-wall carbon nanotubes based on friedel-crafts acylation. Key Eng Mater 727:490–49610.4028/www.scientific.net/KEM.727.490 ↗
22. Wen Y, Meng X, Liu J, Yan J, Wang Z (2016) Surface modification of high-performance polyimide fibers by oxygen plasma treatment. High Perform Polym 29:1083–108910.1177/0954008316669570 ↗
23. Wang W (2017) Plasma treatment of carbon fiber on the tribological property of polyimide composite. Surf Interface Anal 49:692–686
24. Ying L, Liu Y, Dan H, Di Y (2017) The effect of coupling agents on the interfacial properties of wood-fiber-reinforced polyimide composites. Surf Interface Anal 49:1232–123710.1002/sia.6316 ↗
25. Yu J, Zhang T, Xu L, Huang P (2017) Synthesis and characterization of aramid fiber-reinforced polyimide/carbon black composites and their use in a supercapacitor. Chin J Chem 35:1586–159410.1002/cjoc.201700018 ↗
26. Zhang YH, Huang YD, Liu L, Cai KL (2008) Effects of γ-ray radiation grafting on aramid fibers and its composites. Appl Surf Sci 254:3153–316110.1016/j.apsusc.2007.10.081 ↗
27. Chen L, Long Z, Zhang Y, Wang S, Li Z (2017) Influence of alkali treatment on morphology, structure and properties of dry-spinning two-step method jialun polyimide fibers. Polym Mater Sci Eng 33:94–99
28. Xie J, Xin D, Cao H, Wang C, Zhao Y, Yao L, Ji F, Qiu Y (2011) Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment. Surf Coat Technol 206:191–20110.1016/j.surfcoat.2011.04.016 ↗
29. Tian G, Chen B, Qi S (2016) Enhanced surface free energy of polyimide fibers by alkali treatment and its interfacial adhesion behavior to epoxy resins. Compos Interfaces 23:145–15510.1080/09276440.2016.1112647 ↗
30. Liao R, Lv C, Yang L, Zhang Y, Wu W, Tang C (2013) The insulation properties of oil-impregnated insulation paper reinforced with nano-TiO2. J Nanomater 2013:1–7
31. Cai C, Zhu J (2018) The investigation of the friction and wear properties of surface-treated carbon fiber/SiO2 reinforced PMMA composites. Surf Interface Anal 50:133–13710.1002/sia.6348 ↗
32. Chen J, Zhu Y, Ni Q (2014) Surface modification and characterization of aramid fibers with hybrid coating. Appl Surf Sci 321:103–10810.1016/j.apsusc.2014.09.196 ↗
33. Liao R, Zhang F, Yuan Y (2012) Preparation and electrical properties of insulation paper composed of SiO2 hollow spheres. Energies 5:2943–295110.3390/en5082943 ↗
34. Tadic M, Kralj S, Jagodic M (2014) Magnetic properties of novel superparamagnetic iron oxide nanoclusters and their peculiarity under annealing treatment. Appl Surf Sci 322:255–26410.1016/j.apsusc.2014.09.181 ↗
35. Tadic M, Milosevic I, Kralj S (2017) Synthesis of metastable hard-magnetic ε-Fe2O3 nanoparticles from silica-coated akaganeite nanorods. Nanoscale 9:10579–1058410.1039/C7NR03639F ↗
36. Kopanja L, Kralj S, Zunic D (2016) Core-shell superparamagnetic iron oxide nanoparticle (SPION) clusters: TEM micrograph analysis, particle design and shape analysis. Ceram Int 42:10976–1098410.1016/j.ceramint.2016.03.235 ↗
37. LenyMathew NS (2008) Cure characteristics and mechanical properties of HRH bonded nylon-6 short fiber-aanosilica-acrylonitrile butadiene rubber hybrid composite. J Macromol Sci, Rev Polym Process 48:75–81
38. Mansour G, Tsongas K, Tzetzis D (2016) Modal testing of epoxy carbon-aramid fiber hybrid composites reinforced with silica nanoparticles. J Reinf Plast Compos 35:1401–141010.1177/0731684416652488 ↗
39. Mathew L, Narayanankutty SK (2010) Dynamic mechanical behaviour of an elastomeric hybrid composite based on nanosilica and short nylon-6 fibre. Prog Rubber Plast Recycl Technol 26:125–14010.1177/147776061002600302 ↗
40. Raabe J, Fonseca ADS, Bufalino L, Ribeiro C, Martins MA, Marconcini JM, Tonoli GHD (2014) Evaluation of reaction factors for deposition of silica (SiO2) nanoparticles on cellulose fibers. Carbohydr Polym 114:424–43110.1016/j.carbpol.2014.08.042 ↗
41. Hao L, Gao T, Xu W, Wang X, Yang S, Liu X (2016) Preparation of crosslinked polysiloxane/SiO2 nanocomposite via in-situ condensation and its surface modification on cotton fabrics. Appl Surf Sci 371:281–28810.1016/j.apsusc.2016.02.204 ↗
42. Hong Z, Wei D, Yong F, Hao C, Yang Y, Yu J, Jin L (2016) Dielectric properties of polyimide/SiO2 hollow spheres composite films with ultralow dielectric constant. Mater Sci Eng, B 203:13–1810.1016/j.mseb.2015.10.003 ↗
43. Liu L, Lv F, Li P, Ding L, Tong W, Chu PK, Zhang Y (2016) Preparation of ultra-low dielectric constant silica/polyimide nanofiber membranes by electrospinning. Compos Part A 84:292–29810.1016/j.compositesa.2016.02.002 ↗
44. Tapaswi PK, Choi MC, Jung YS, Cho HJ, Seo DJ, Ha CS (2014) Synthesis and characterization of fully aliphatic polyimides from an aliphatic dianhydride with piperazine spacer for enhanced solubility, transparency, and low dielectric constant. J Polym Sci, Part A: Polym Chem 52:2316–232810.1002/pola.27242 ↗
45. Zhang YH, Lu SG, Li YQ, Dang ZM, Xin JH, Fu SY, Li GT, Guo RR, Li LF (2005) Novel silica tube/polyimide composite films with variable low dielectric constant. Adv Mater 17:1056–105910.1002/adma.200401330 ↗
46. Lin L, Zhang L, Zhang C, Dong M, Liu C, Wang A, Chu Y, Zhang Y, Cao Z (2013) Membrane adsorber with metal organic frameworks for sulphur removal. RSC Adv 3:9889–989610.1039/c3ra41187g ↗
47. Lu T, Jiang M, Jiang Z, Hui D, Wang Z, Zhou Z (2013) Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites. Compos Part B 51:28–3410.1016/j.compositesb.2013.02.031 ↗
48. Li X, Tang C, Wang Q, Li X, Hao J (2017) Molecular simulation research on the micro effect mechanism of interfacial properties of nano-SiO2/meta-aramid fiber. Int J Heat Technol 35:123–12910.18280/ijht.350117 ↗
49. Tang G, Hu X, Tang T (2017) Mechanical properties of surface-treated UHMWPE fiber and SiO2 filled PMMA composites. Surf Interface Anal 49:898–90310.1002/sia.6240 ↗
50. Patterson BA, Sodano HA (2016) Enhanced interfacial strength and UV shielding of aramid fiber composites through ZnO nanoparticle sizing. ACS Appl Mater Inter 49:33963–3397110.1021/acsami.6b07555 ↗
51. Tang C, Li X, Yin F (2017) The performance improvement of aramid insulation paper by nano-SiO2 modification. IEEE Trans Dielect Electr Insul 24:2400–240910.1109/TDEI.2017.006560 ↗