journal article·2014-05

Silica sol–gel chemistry: creating materials and architectures for energy generation and storage

Daniel Membreno, Leland Smith, Bruce Dunn

Publisher page

Abstract

There is widespread recognition that the use of energy in the twenty-first century must be sustainable. Because of its extraordinary flexibility, silica sol–gel chemistry offers the opportunity to create the novel materials and architectures which can lead to significant advances in renewable energy and energy storage technologies. In this paper, we review some of the significant contributions of silica sol–gel chemistry to these fields with particular emphasis on electrolytes and separators where sol–gel approaches to functionalization and encapsulation have been of central importance. Examples are presented in the areas of dye-sensitized solar cells, biofuel cells, proton exchange membrane fuel cells, redox flow batteries and electrochemical energy storage. Original work is also included for the sol–gel encapsulation of a room temperature ionic liquid to create a solid state electrolyte for electrochemical capacitors. In view of the critical importance of energy and the versatility of the sol–gel process, we expect the sol–gel field to play an increasingly important role in the development of sustainable energy generation and storage technologies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced battery technologies research · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (67)

Show source-provided references
1. Dunn B, Kamath H, Tarascon J (2011) Electrical energy storage for the grid: a battery of choices. Science 334:928–93510.1126/science.1212741 ↗
2. Chu S, Majumdar A (2012) Opportunities and challenges for a sustainable energy future. Nature 488:294–303. doi: 10.1038/nature1147510.1038/nature11475 ↗
3. International Energy Agency (2013) Medium-term renewable energy market report. http://www.iea.org/publications/
4. Lewis NS, Nocera DG (2006) Powering the planet: chemical challenges in solar energy utilization. Proc Natl Acad Sci USA 103:15729–15735. doi: 10.1073/pnas.060339510310.1073/pnas.0603395103 ↗
5. Livage J, Henry M, Sanchez C (1988) Sol–gel chemistry of transition metal oxides. Prog Solid State Chem 18:259–34110.1016/0079-6786(88)90005-2 ↗
6. Hench LL, West JK (1990) The sol–gel process. Chem Rev 90:33–72. doi: 10.1021/cr00099a00310.1021/cr00099a003 ↗
7. Brinker CJ, Scherer GW (1990) Sol–gel science: the physics and chemistry of sol–gel processing. Academic Press, San Diego
8. Miller OD, Yablonovitch E, Kurtz SR (2012) Strong internal and external luminescence as solar cells approach the Shockley–Queisser limit. IEEE J Photovoltaics 2:303–311. doi: 10.1109/JPHOTOV.2012.219843410.1109/JPHOTOV.2012.2198434 ↗
9. Cho T-Y, Ko K-W, Yoon S-G, et al. (2013) Efficiency enhancement of flexible dye-sensitized solar cell with sol–gel formed Nb2O5 blocking layer. Curr Appl Phys 13:1391–1396. doi: 10.1016/j.cap.2013.04.01210.1016/j.cap.2013.04.012 ↗
10. Aparicio M, Jitianu A, Klein LC (2012) Advances in sol–gel derived materials and technologies. Springer, Berlin
11. O’Regan B, Grätzel M (1991) A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353:737–740. doi: 10.1038/353737a010.1038/353737a0 ↗
12. Sauvage F, Chen D, Comte P et al (2010) Dye-sensitized solar cells employing a single film of mesoporous TiO2 beads achieve power conversion efficiencies over 10%. ACS Nano 4:4420–442510.1021/nn1010396 ↗
13. Stathatos E, Lianos P, Lavrencic-Stangar U, Orel B (2002) A high-performance solid-state dye-sensitized photo electrochemical cell employing a nanocomposite gel electrolyte made by the sol–gel route. Adv Mater 14:354. doi: 10.1002/1521-4095(20020304)14:5<354:AID-ADMA354>3.0.CO;2-110.1002/1521-4095(20020304)14:5<354::AID-ADMA354>3.0.CO;2-1 ↗
14. Li P, Wu J, Hao S et al (2010) Quasi-solid state dye sensitized solar cells based on the cross-linked poly (ethylene glycol) electrolyte with tetraethoxysilane. J Appl Polym Sci 120(3):1752–1757. doi: 10.1002/app10.1002/app.33369 ↗
15. Wang P, Zakeeruddin SM, Comte P et al (2003) Gelation of ionic liquid-based electrolytes with silica nanoparticles for quasi-solid-state dye-sensitized solar cells. J Am Chem Soc 125:1166–1167. doi: 10.1021/ja029294+10.1021/ja029294+ ↗
16. Galinski M, Lewandowski A, Stepniak I (2006) Ionic liquids as electrolytes. Electrochim Acta 51:5567–5580. doi: 10.1016/j.electacta.2006.03.01610.1016/j.electacta.2006.03.016 ↗
17. Stathatos E, Lianos P (2003) A quasi-solid-state dye-sensitized solar cell based on a sol–gel nanocomposite electrolyte containing ionic liquid. Chem Mater 102:1825–182910.1021/cm0213568 ↗
18. Kalowekamo J, Baker E (2009) Estimating the manufacturing cost of purely organic solar cells. Sol Energy 83:1224–1231. doi: 10.1016/j.solener.2009.02.00310.1016/j.solener.2009.02.003 ↗
19. Carrette L, Friedrich KA, Stimming U (2000) Fuel cells: principles, types, fuels, and applications. ChemPhysChem 1:162–193. doi: 10.1002/1439-7641(20001215)1:4<162:AID-CPHC162>3.0.CO;2-Z10.1002/1439-7641(20001215)1:4<162::AID-CPHC162>3.0.CO;2-Z ↗
20. Osman MH, Shah AA, Walsh FC (2011) Recent progress and continuing challenges in bio-fuel cells. Part I: enzymatic cells. Biosens Bioelectron 26:3087–3102. doi: 10.1016/j.bios.2011.01.00410.1016/j.bios.2011.01.004 ↗
21. Kreuer KD (2001) On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells. J Membr Sci 185:29–39. doi: 10.1016/S0376-7388(00)00632-310.1016/S0376-7388(00)00632-3 ↗
22. Skyllas-Kazacos M, Chakrabarti MH, Hajimolana SA et al (2011) Progress in flow battery research and development. J Electrochem Soc 158:R55–R79. doi: 10.1149/1.359956510.1149/1.3599565 ↗
23. Tripathi BP, Shahi VK (2011) Organic–inorganic nanocomposite polymer electrolyte membranes for fuel cell applications. Prog Polym Sci 36:945–979. doi: 10.1016/j.progpolymsci.2010.12.00510.1016/j.progpolymsci.2010.12.005 ↗
24. Osman MH, Shah AA, Walsh FC (2010) Recent progress and continuing challenges in bio-fuel cells. Part II: microbial. Biosens Bioelectron 26:953–963. doi: 10.1016/j.bios.2010.08.05710.1016/j.bios.2010.08.057 ↗
25. Lim J, Malati P, Bonet F, Dunn B (2007) Nanostructured sol–gel electrodes for biofuel cells. J Electrochem Soc 154:A140–A145. doi: 10.1149/1.240490410.1149/1.2404904 ↗
26. Willner I, Katz E (2000) Integration of layered redox proteins and conductive supports for bioelectronic applications. Angew Chem Int Ed 39:1180–121810.1002/(SICI)1521-3773(20000403)39:7<1180::AID-ANIE1180>3.0.CO;2-E ↗
27. Urbanová V, Etienne M, Walcarius A (2013) One step deposition of sol–gel carbon nanotubes biocomposite for reagentless electrochemical devices. Electroanalysis 25:85–93. doi: 10.1002/elan.20120040710.1002/elan.201200407 ↗
28. Wang Z, Etienne M, Kohring G-W et al (2011) Electrochemically assisted deposition of sol–gel bio-composite with co-immobilized dehydrogenase and diaphorase. Electrochim Acta 56:9032–9040. doi: 10.1016/j.electacta.2011.05.13010.1016/j.electacta.2011.05.130 ↗
29. Deng L, Shang L, Wen D et al (2010) A membraneless biofuel cell powered by ethanol and alcoholic beverage. Biosens Bioelectron 26:70–73. doi: 10.1016/j.bios.2010.05.00710.1016/j.bios.2010.05.007 ↗
30. Strack G, Luckarift HR, Sizemore SR et al (2013) Power generation from a hybrid biological fuel cell in seawater. Bioresour Technol 128:222–228. doi: 10.1016/j.biortech.2012.10.10410.1016/j.biortech.2012.10.104 ↗
31. Szot K, Lesniewski A, Niedziolka J et al (2008) Sol–gel processed ionic liquid–hydrophilic carbon nanoparticles multilayer film electrode prepared by layer-by-layer method. J Electroanal Chem 623:170–176. doi: 10.1016/j.jelechem.2008.07.02310.1016/j.jelechem.2008.07.023 ↗
32. Niedziolka-Jonsson J, Jonsson-Niedziolka M, Nogala W, Palys B (2011) Electrosynthesis of thin sol–gel films at a three-phase junction. Electrochim Acta 56:3311–3316. doi: 10.1016/j.electacta.2011.01.02410.1016/j.electacta.2011.01.024 ↗
33. Ladewig BP, Knott RB, Hill AJ et al (2007) Physical and electrochemical characterization of nanocomposite membranes of Nafion and functionalized silicon oxide. Chem Mater 19:2372–2381. doi: 10.1021/cm062869810.1021/cm0628698 ↗
34. Mauritz K, Warren R (1989) Microstructural evolution of a silicon oxide phase in a perfluorosulfonic acid ionomer by an in situ sol–gel reaction. 1. Infrared spectroscopic studies. Macromolecules 1734:1730–173410.1021/ma00194a038 ↗
35. Di Vona M, Ahmed Z, Bellitto S et al (2007) SPEEK-TiO2 nanocomposite hybrid proton conductive membranes via in situ mixed sol–gel process. J Membr Sci 296:156–161. doi: 10.1016/j.memsci.2007.03.03710.1016/j.memsci.2007.03.037 ↗
36. Tsai J-C, Kuo J-F, Chen C-Y (2007) Synthesis and properties of novel HMS-based sulfonated poly(arylene ether sulfone)/silica nano-composite membranes for DMFC applications. J Power Sources 174:103–113. doi: 10.1016/j.jpowsour.2007.08.08610.1016/j.jpowsour.2007.08.086 ↗
37. Krishnan P, Park J-S, Kim C-S (2006) Preparation of proton-conducting sulfonated poly(ether ether ketone)/boron phosphate composite membranes by an in situ sol–gel process. J Membr Sci 279:220–229. doi: 10.1016/j.memsci.2005.12.01010.1016/j.memsci.2005.12.010 ↗
38. Wen S, Gong C, Tsen W-C et al (2009) Sulfonated poly(ether sulfone) (SPES)/boron phosphate (BPO4) composite membranes for high-temperature proton-exchange membrane fuel cells. Int J Hydrogen Energy 34:8982–8991. doi: 10.1016/j.ijhydene.2009.08.07410.1016/j.ijhydene.2009.08.074 ↗
39. Li Q, Jensen JO, Savinell RF, Bjerrum NJ (2009) High temperature proton exchange membranes based on polybenzimidazoles for fuel cells. Prog Polym Sci 34:449–477. doi: 10.1016/j.progpolymsci.2008.12.00310.1016/j.progpolymsci.2008.12.003 ↗
40. Bagotsky VS (2012) Fuel cells: problems and solutions. John Wiley & Sons, Hoboken10.1002/9781118191323 ↗
41. Xiao L, Zhang H, Scanlon E (2005) High-temperature polybenzimidazole fuel cell membranes via a sol–gel process. Chem Mater 16:5328–533310.1021/cm050831+ ↗
42. Mader JA, Benicewicz BC (2010) Sulfonated polybenzimidazoles for high temperature PEM fuel cells. Macromolecules 43:6706–6715. doi: 10.1021/ma100909810.1021/ma1009098 ↗
43. Oriji G, Katayama Y, Miura T (2004) Investigation on V(IV)/V(V) species in a vanadium redox flow battery. Electrochim Acta 49:3091–3095. doi: 10.1016/j.electacta.2004.02.02010.1016/j.electacta.2004.02.020 ↗
44. Xi J, Wu Z, Qiu X, Chen L (2007) Nafion/SiO2 hybrid membrane for vanadium redox flow battery. J Power Sources 166:531–536. doi: 10.1016/j.jpowsour.2007.01.06910.1016/j.jpowsour.2007.01.069 ↗
45. Teng X, Zhao Y, Xi J et al (2009) Nafion/organic silica modified TiO2 composite membrane for vanadium redox flow battery via in situ sol–gel reactions. J Membr Sci 341:149–154. doi: 10.1016/j.memsci.2009.05.05110.1016/j.memsci.2009.05.051 ↗
46. Schulte D, Drillkens J, Schulte B, Sauer DU (2010) Nafion hybrid membranes for use in redox flow batteries. J Electrochem Soc 157:A989–A992. doi: 10.1149/1.345662510.1149/1.3456625 ↗
47. Teng X, Lei J, Gu X et al (2012) Nafion-sulfonated organosilica composite membrane for all vanadium redox flow battery. Ionics (Kiel) 18:513–521. doi: 10.1007/s11581-012-0694-z10.1007/s11581-012-0694-z ↗
48. Kotz R, Carlen M (2000) Principles and applications of electrochemical capacitors. Electrochim Acta 45:2483–249810.1016/S0013-4686(00)00354-6 ↗
49. Goodenough JB, Kim Y (2010) Challenges for rechargeable Li batteries. Chem Mater 22:587–603. doi: 10.1021/cm901452z10.1021/cm901452z ↗
50. Liu H, Wu YP, Rahm E et al (2004) Cathode materials for lithium ion batteries prepared by sol–gel methods. J Solid State Electrochem 8:450–466. doi: 10.1007/s10008-004-0521-110.1007/s10008-004-0521-1 ↗
51. Fu L, Liu H, Li C et al (2005) Electrode materials for lithium secondary batteries prepared by sol–gel methods. Prog Mater Sci 50:881–928. doi: 10.1016/j.pmatsci.2005.04.00210.1016/j.pmatsci.2005.04.002 ↗
52. Morita M, Qiao J-L, Yoshimoto N, Ishikawa M (2004) Application of proton conducting polymeric electrolytes to electrochemical capacitors. Electrochim Acta 50:837–841. doi: 10.1016/j.electacta.2004.02.05310.1016/j.electacta.2004.02.053 ↗
53. Vioux A, Viau L, Volland S, Le Bideau J (2010) Use of ionic liquids in sol–gel; ionogels and applications. C R Chim 13:242–255. doi: 10.1016/j.crci.2009.07.00210.1016/j.crci.2009.07.002 ↗
54. O’Mahony A, Silvester D (2008) Effect of water on the electrochemical window and potential limits of room-temperature ionic liquids. J Chem Eng Data 53:2884–289110.1021/je800678e ↗
55. Le Bideau J, Viau L, Vioux A (2011) Ionogels, ionic liquid based hybrid materials. Chem Soc Rev 40:907–925. doi: 10.1039/c0cs00059k10.1039/C0CS00059K ↗
56. Kurig H, Romann T, Jänes A, Lust E (2010) Electrochemical characteristics of titanium carbide derived carbon| 1-ethyl-3-methylimidazolium tetrafluoroborate electrical double layer capacitors. ECS Trans 25:15–2310.1149/1.3328507 ↗
57. Echelmeyer T, Meyer H, van Wüllen L (2009) Novel ternary composite electrolytes: Li ion conducting ionic liquids in silica glass. Chem Mater 21(11):2280–228510.1021/cm9005184 ↗
58. Lewandowski A, Świderska-Mocek A (2009) Ionic liquids as electrolytes for Li-ion batteries—an overview of electrochemical studies. J Power Sources 194:601–609. doi: 10.1016/j.jpowsour.2009.06.08910.1016/j.jpowsour.2009.06.089 ↗
59. Néouze M, Bideau J, Gaveau P et al (2006) Ionogels, new materials arising from the confinement of ionic liquids within silica-derived networks. Chem Mater 18:3931–393610.1021/cm060656c ↗
60. Zhang J, Ma Y, Shi F et al (2009) Microporous and mesoporous materials room temperature ionic liquids as templates in the synthesis of mesoporous silica via a sol–gel method. Microporous Mesoporous Mater 119:97–103. doi: 10.1016/j.micromeso.2008.10.00310.1016/j.micromeso.2008.10.003 ↗
61. Bellayer S, Viau L, Tebby Z, et al. (2009) Immobilization of ionic liquids in translucent tin dioxide monoliths by sol–gel processing. Dalton Trans 2009:1307–1313. doi: 10.1039/b814978j10.1039/b814978j ↗
62. Davenport M, Rodriguez A, Shea K, Siwy Z (2009) Squeezing ionic liquids through nanopores. Nano Lett 9:2125–212810.1021/nl900630z ↗
63. Le Bideau J, Ducros J-B, Soudan P, Guyomard D (2011) Solid-state electrode materials with ionic-liquid properties for energy storage: the lithium solid-state ionic-liquid concept. Adv Funct Mater 21:4073–4078. doi: 10.1002/adfm.20110077410.1002/adfm.201100774 ↗
64. Lin R, Huang P, Ségalini J et al (2009) Solvent effect on the ion adsorption from ionic liquid electrolyte into sub-nanometer carbon pores. Electrochim Acta 54:7025–7032. doi: 10.1016/j.electacta.2009.07.01510.1016/j.electacta.2009.07.015 ↗
65. Karout A, Pierre A (2009) Silica gelation catalysis by ionic liquids. Catal Commun 10:359–361. doi: 10.1016/j.catcom.2008.07.04610.1016/j.catcom.2008.07.046 ↗
66. Sharp K (1994) A two-component, non-aqueous route to silica gel. J Sol–Gel Sci Technol 41:35–4110.1007/BF00486210 ↗
67. Soleimani Dorcheh A, Abbasi MH (2008) Silica aerogel; synthesis, properties and characterization. J Mater Process Technol 199:10–26. doi: 10.1016/j.jmatprotec.2007.10.06010.1016/j.jmatprotec.2007.10.060 ↗