Sol–gel preparation of fluoro-containing ORMOSIL antireflective coating with resistance simultaneously to hydrophilic and oleophilic pollutants
Source abstract
Abstract
Fluoro-containing ORMOSIL (organically modified silicate) sols were prepared by a one-pot sol–gel Stober route by co-condensation of tetraethylorthosilicate (TEOS) and fluorinated alkyl silane [1H, 1H, 2H, 2H-perfluorodecyltriethoxysilanes, (POTS)] using isopropanol as dispersant and ammonia as catalyst. Antireflective (AR) coatings from these sols were prepared by dip coating. It was found that isopropanol not only played as dispersant but also grafted to the surface of colloidal silica particles, and therefore gave the fluoro-free AR coating an almost superhydrophobic property. By increasing the molar ratio of POTS to TEOS, the oleophobicity of AR coatings increased gradually. As the molar ratio of POTS to TEOS is 0.05, the AR coating had the advantages of excellent hydrophobicity, improved oleophobicity and high transmittance. The water, CH2I2 and polydimethyl siloxane contact angles are 143°, 119° and 85°, respectively. The water contact angle was further increased to be higher than 150° by a further surface hydrophobic modification with hexamethylisilazane. The coated glass substrates (BK-7) had very high transmittance of up to 99.8 % at a determined wavelength and had good AR stability to the hydrophilic and oleophilic pollutants. By exposing to humid environment (about 95 % humidity) for 2 months, the transmittance of fluoro-free AR coating decreased from 99.9 to about 99.5 % while that of superhydrphobic and oleophobic AR coating decreased from 99.8 to 99.6 %. Being placed in a vacuum chamber which had organic pollutants volatilized from vacuum pump oil, the transmittance of fluoro-free silica AR coating decreased seriously from 99.9 to 97.8 % while that of fluoro-containing ORMOSIL AR coating decreased slightly from 99.8 to 99.1 %. Fluoro-containing ORMOSIL antireflective coating with resistance simultaneously to hydrophilic and oleophilic pollutants was prepared by sol–gel process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Moses EI, Campbell JH, Stolz CJ, Wuest CR (2003) Proc SPIE 5001:1–1510.1117/12.500351 ↗
2. Thomas IM (1986) Appl Opt 25:1481–148310.1364/AO.25.001481 ↗
3. Wang Y, Li X, Li M, Shi B, Liu Y, Mao L (2014) J Sol-gel Sci Technol 70:1–510.1007/s10971-013-3259-3 ↗
4. Xia B, Zhang Q, Yao S, Zhang Y, Xiao B, Jiang B (2014) J Sol-gel Sci Technol 71:291–29610.1007/s10971-014-3362-0 ↗
5. Whitman PK, Frieders SC, Fair J, Thomas IM, Aboud R, Thorsness CB, Burnham AK (1999) ICF Q Rep 9:163–176
6. Thomas IM (1994) Proc SPIE 2114:232–24310.1117/12.180884 ↗
7. Zhang X, Ye H, Xiao B, Yan L, Lv H, Jiang B (2010) J Phys Chem C 114:19979–1998310.1021/jp106192z ↗
8. Zhang XX, Xia BB, Ye HP, Zhang YL, Xiao B, Yan LH, Lv HB, Jiang B (2012) J Mater Chem 2012(22):13132–1314010.1039/c2jm31005h ↗
9. Thomas IM, Burnham AK, Ertel JR, Frieders SC (1999) Proc SPIE 3492:220–22910.1117/12.354236 ↗
10. Zhang XX, Cai S, You D, Yan LH, Lv HB, Yuan XD, Jiang B (2013) Adv Funct Mater 23:4361–436510.1002/adfm.201203059 ↗
11. Liu Y, Shen J, Zhou B, Wu G, Zhang Z (2013) J Sol-gel Sci Technol 68:81–8710.1007/s10971-013-3137-z ↗
12. Manca M, Cannavale A, Marco LD, Aricò AS, Cingolani R, Gigli G (2009) Langmuir 25:6357–636210.1021/la804166t ↗
13. Xu Y, Zhang L, Wu D, Sun YH, Huang ZX, Jiang XD, Wei XF, Li ZH, Dong BZ, Wu ZH (2005) J Opt Soc Am B 22:905–91210.1364/JOSAB.22.000905 ↗
14. Suratwala TI, Hanna ML, Miller EL, Whitman PK, Thomas IM, Ehrmann PE, Maxwll RS, Burnham AK (2003) J Non-Crystal Solids 316:349–36310.1016/S0022-3093(02)01629-0 ↗
15. Mahadik SA, Parale V, Vhatkara RS, Mahadik DB, Kavale MS, Wagh PB, Gupta S, Gurav J (2013) Appl Surf Sci 277:67–7210.1016/j.apsusc.2013.04.001 ↗
16. Xu LG, Gao LJ, He JH (2012) RSC Adv 2:12764–1276910.1039/c2ra22107a ↗
17. Jin H, Tian X, Ikkala L, Ras RH (2013) ACS Appl Mater Interfaces 5:485–48810.1021/am302541f ↗
18. Lee SG, Ham DS, Lee DY, Bong H, Cho K (2013) Langmuir 29:15051–1505710.1021/la404005b ↗
19. Hsieh CT, Wu FL, Chen WY (2010) Mater Chem Phys 121:14–2110.1016/j.matchemphys.2009.12.031 ↗
20. Zhou G, He JH, Gao LJ, Ren TT, Li T (2013) RSC Adv 3:21789–2179610.1039/c3ra43830a ↗
21. Zhang X, Shi F, Niu J, Jiang YG, Wang ZQ (2008) J Mater Chem 18:621–63310.1039/B711226B ↗
22. Stöber W, Fink A, Bohn E (1968) J Colloid Interface Sci 26:62–6910.1016/0021-9797(68)90272-5 ↗
23. Cai S, Zhang Y, Zhang H, Yan H, Lv H, Jiang B (2014) ACS Appl Mater Interfaces. doi: 10.1021/am501972y
24. Brinker CJ (1990) Scherer GW. Sol-gel science: the physics and chemistry of Sol-gel processing. Academic Press, San Diego, p 105
25. Zhang X, Cao C, Xiao B, Yan L, Zhang Q, Jiang B (2010) J Sol-gel Sci Technol 53:79–8410.1007/s10971-009-2058-3 ↗
26. Xiao B, Xia B, Lv H, Zhang X, Jiang B (2012) J Sol-gel Sci Technol 64:276–28110.1007/s10971-012-2766-y ↗
27. Zhang X, Zheng F, Ye L, Xiong P, Yan L, Yang W, Jiang B (2014) RSC Adv 4:9838–984110.1039/c3ra47185c ↗
28. Zhang X, Zhang Y, Ye H, Xiao B, Yan L, Lv H, Jiang B (2011) J Sol-gel Sci Technol 58:340–34410.1007/s10971-011-2398-7 ↗
29. Mahltig B, Böttcher H (2003) J Sol-gel Sci Technol 27:43–5210.1023/A:1022627926243 ↗
30. Molina D, Griffini G, Levi M, Turri S (2014) Polym Adv Technol. doi: 10.1002/pat.3354
31. Li X, Gross M, Oreb B, Shen J (2012) J Phys Chem C 116:18367–1837110.1021/jp307390u ↗
32. Mosquera MJ, Santos DM, Rivas T (2010) Langmuir 26:6737–674510.1021/la9040979 ↗
33. Illescas JF, Mosquera MJ (2011) J Phys Chem C 115:14624–1463410.1021/jp203524p ↗
34. Monde T, Fukube H, Nemoto F, Yoko T, Konakahara T (1999) J Non-Crystal Solids 246:54–6410.1016/S0022-3093(99)00003-4 ↗
35. Tian R, Seitz O, Li M, Hu W, Chabal YJ, Gao J (2010) Langmuir 26:4563–456610.1021/la904597c ↗