Effect of organic precursor in hybrid sol–gel coatings for corrosion protection and the application on hot dip galvanised steel
Source abstract
Abstract
Sol-gel coating material with enhanced corrosion protection for zinc-coated steel has been obtained through the incorporation of mono-phenol and bi-phenol organic precursors in an epoxide functionalised-silica-zirconia matrix. The effect of the presence of the organic precursors in the baseline formulation has been studied; sol stability has been examined by viscosity evolution; gel densification stage has been studied by differential scanning calorimetry (DSC); material composition has been analysed by Fourier transform infrared spectroscopy (FTIR) and X-ray spectroscopy (XPS); coating thickness and roughness has been measured by profilometry. Corrosion performance in three artificial weathering tests showed outstanding performance in the delay of zinc and steel corrosion products emergence, and electrochemical impedance spectroscopy (EIS) measurement permitted the identification of the coating presenting the most promising properties in terms of corrosion protection. Developed coatings have shown outstanding contribution to service life extension of zinc-coated parts.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Muster TH, Cole IS (2004) The protective nature of passivation films on zinc: surface charge. Corros Sci 46:2319–2335. https://doi.org/10.1016/j.corsci.2004.01.00210.1016/j.corsci.2004.01.002 ↗
2. Thomas S, Cole IS, Sridhar M, Birbilis N (2013) Revisiting zinc passivation in alkaline solutions. Electrochim Acta 97:192–201. https://doi.org/10.1016/j.electacta.2013.03.00810.1016/j.electacta.2013.03.008 ↗
3. Li-Qun Z, Fei Y, Huang H-J (2007) Investigation of formation process of the chrome-free passivation film of electrodeposited zinc. Chin J Aeronaut 20:129–13310.1016/S1000-9361(07)60019-3 ↗
4. Gabrielli C, Keddam M, Minouflet-Laurent F et al. (2003) Investigation of zinc chromatation - Part II. Electrochemical impedance techniques. Electrochim Acta 48:1483–1490. https://doi.org/10.1016/S0013-4686(03)00029-X10.1016/S0013-4686(03)00029-X ↗
5. da Silva CG, Margarit-Mattos ICP, Mattos OR et al. (2009) The molybdate-zinc conversion process. Corros Sci 51:151–158. https://doi.org/10.1016/j.corsci.2008.10.01910.1016/j.corsci.2008.10.019 ↗
6. Tsai C-Y, Liu J-S, Chen P-L, Lin C-S (2010) A two-step roll coating phosphate/molybdate passivation treatment for hot-dip galvanized steel sheet. Corros Sci 52:3385–3393. https://doi.org/10.1016/j.corsci.2010.06.02010.1016/j.corsci.2010.06.020 ↗
7. Hamlaoui Y, Tifouti L, Pedraza F (2009) Corrosion behaviour of molybdate-phosphate-silicate coatings on galvanized steel. Corros Sci 51:2455–2462. https://doi.org/10.1016/j.corsci.2009.06.03710.1016/j.corsci.2009.06.037 ↗
8. Shkirskiy V, Keil P, Hintze-Bruening H et al. (2015) MoO42− as a soluble inhibitor for Zn in neutral and alkaline solutions. Corros Sci 99:31–4110.1016/j.corsci.2015.05.005 ↗
9. Klimow G, Fink N, Grundmeier G (2007) Electrochemical studies of the inhibition of the cathodic delamination of organically coated galvanised steel by thin conversion films. Electrochim Acta 53:1290–1299. https://doi.org/10.1016/j.electacta.2007.05.04510.1016/j.electacta.2007.05.045 ↗
10. da Silva CG, Correia AN, De Lima-Neto P et al. (2005) Study of conversion coatings obtained from tungstate-phosphoric acid solutions Corros Sci 47:709–72210.1016/j.corsci.2004.07.008 ↗
11. Zou Z, Li N, Li D et al. (2011) A vanadium-based conversion coating as chromate replacement for electrogalvanized steel substrates. J Alloy Compd 509:503–507. https://doi.org/10.1016/j.jallcom.2010.09.08010.1016/j.jallcom.2010.09.080 ↗
12. Hosseini M, Ashassi-Sorkhabi H, Ghiasvand HAY (2007) Corrosion protection of electro-galvanized steel by green conversion coatings. J Rare Earths 25:537–543. https://doi.org/10.1016/S1002-0721(07)60558-410.1016/S1002-0721(07)60558-4 ↗
13. Gang K, Jintang L, Haijiang W (2009) Post treatment of silane and cerium salt as chromate replacers on galvanized steel. J Rare Earths 27:164–168. https://doi.org/10.1016/S1002-0721(08)60213-610.1016/S1002-0721(08)60213-6 ↗
14. K. Guin A, Bhadu M, Sinhababu M et al. (2014) Effective corrosion inhibition performance of La(NO 3) 3 doped sol-gel coating on galvanized steel sheet. Anti-Corros Methods Mater 61:370–379. https://doi.org/10.1108/ACMM-08-2013-129210.1108/ACMM-08-2013-1292 ↗
15. Stromberg C, Thissen P, Klueppel I et al. (2006) Synthesis and characterisation of surface gradient thin conversion films on zinc coated steel. Electrochim Acta 52:804–815. https://doi.org/10.1016/j.electacta.2006.06.01410.1016/j.electacta.2006.06.014 ↗
16. Lei W, Chang-Sheng L, Hai-Yun Y, Cheng-Qiang A (2012) Structure and corrosion resistance of a composite γ-amino propyl triethoxy silane and γ-glycidoxy propyl trimethoxy silane conversion coating on galvanized steel. J Iron Steel Res, Int 19:46–51. https://doi.org/10.1016/S1006-706X(13)60019-910.1016/S1006-706X(13)60019-9 ↗
17. Varma PCR, Periyat P, Oubaha M et al. (2011) Application of niobium enriched ormosils as thermally stable coatings for aerospace aluminium alloys. Surf Coat Technol 205:3992–3998. https://doi.org/10.1016/j.surfcoat.2011.02.02310.1016/j.surfcoat.2011.02.023 ↗
18. Grundmeier G, Schmidt W, Stratmann M (2000) Corrosion protection by organic coatings: electrochemical mechanism and novel methods of investigation. Electrochim Acta 45:2515–2533. https://doi.org/10.1016/S0013-4686(00)00348-010.1016/S0013-4686(00)00348-0 ↗
19. Trabelsi W, Triki E, Dhouibi L et al. (2006) The use of pre-treatments based on doped silane solutions for improved corrosion resistance of galvanised steel substrates. Surf Coat Technol 200:4240–4250. https://doi.org/10.1016/j.surfcoat.2005.01.04410.1016/j.surfcoat.2005.01.044 ↗
20. Wang D, Bierwagen GP (2009) Progress in organic coatings sol–gel coatings on metals for corrosion protection. Prog Org Coat 64:327–338. https://doi.org/10.1016/j.porgcoat.2008.08.01010.1016/j.porgcoat.2008.08.010 ↗
21. Figueira RB, Silva CJR, Pereira E V (2015) Hybrid sol-gel coatings for corrosion protection of hot-dip galvanized steel in alkaline medium. Surf Coat Technol 265:191–204. https://doi.org/10.1016/j.surfcoat.2015.01.03410.1016/j.surfcoat.2015.01.034 ↗
22. Bera S, Rout TK, Udayabhanu G, Narayan R (2016) Water-based & eco-friendly epoxy-silane hybrid coating for enhanced corrosion protection & adhesion on galvanized steel. Prog Org Coat 101:24–44. https://doi.org/10.1016/j.porgcoat.2016.07.01010.1016/j.porgcoat.2016.07.010 ↗
23. Zand RZ, Flexer V, De Keersmaecker M et al. (2015) Effects of activated ceria and zirconia nanoparticles on the protective behaviour of silane coatings in chloride solutions. Int J Electrochem Sci 10:997–101410.1016/S1452-3981(23)05051-4 ↗
24. Zand RZ, Verbeken K, Adriaens A (2013) Influence of the cerium concentration on the corrosion performance of Ce-doped silica hybrid coatings on hot dip galvanized steel substrates. Int J Electrochem Sci 8:548–56310.1016/S1452-3981(23)14040-5 ↗
25. Fedel M, Poelman M, Zago M et al. (2015) Influence of formulation and application parameters on the performances of a sol-gel/clay nanocomposite on the corrosion resistance of hot-dip galvanized steel. Part II. Effect of curing temperature and time. Surf Coat Technol 274:9–17. https://doi.org/10.1016/j.surfcoat.2014.07.02010.1016/j.surfcoat.2014.07.020 ↗
26. Motte C, Poelman M, Roobroeck A et al. (2012) Improvement of corrosion protection offered to galvanized steel by incorporation of lanthanide modified nanoclays in silane layer. Prog Org. Coatings 74:326–333. https://doi.org/10.1016/j.porgcoat.2011.12.00110.1016/j.porgcoat.2011.12.001 ↗
27. Savignac P, Menu M, Gressier M et al. (2018) Improvement of adhesion properties and corrosion resistance of sol-gel coating on zinc. Molecules 23:1079–1091. https://doi.org/10.3390/molecules2305107910.3390/molecules23051079 ↗
28. Kunst SR, Piaggio Cardoso HR, Rossa Beltrami LV et al. (2015) New sol-gel formulations to increase the barrier effect of a protective coating against the corrosion and wear of galvanized steel. Mater Res 18:138–15010.1590/1516-1439.288914 ↗
29. Montemor MF, Pinto R, Ferreira MGS (2009) Chemical composition and corrosion protection of silane films modified with CeO2 nanoparticles. Electrochim Acta 54:5179–5189. https://doi.org/10.1016/j.electacta.2009.01.05310.1016/j.electacta.2009.01.053 ↗
30. Montemor MF, Ferreira MGS (2007) Cerium salt activated nanoparticles as fillers for silane films: Evaluation of the corrosion inhibition performance on galvanised steel substrates. Electrochim Acta 52:6976–6987. https://doi.org/10.1016/j.electacta.2007.05.02210.1016/j.electacta.2007.05.022 ↗
31. Trabelsi W, Cecilio P, Ferreira MGS, Montemor MF (2005) Electrochemical assessment of the self-healing properties of Ce-doped silane solutions for the pre-treatment of galvanised steel substrates. Prog Org Coat 54:276–284. https://doi.org/10.1016/j.porgcoat.2005.07.00610.1016/j.porgcoat.2005.07.006 ↗
32. Montemor MF, Trabelsi W, Lamaka SV et al. (2008) The synergistic combination of bis-silane and CeO2·ZrO2 nanoparticles on the electrochemical behaviour of galvanised steel in NaCl solutions. Electrochim Acta 53:5913–5922. https://doi.org/10.1016/j.electacta.2008.03.06910.1016/j.electacta.2008.03.069 ↗
33. Montemor MF, Trabelsi W, Zheludevich M, Ferreira MGS (2006) Modification of bis-silane solutions with rare-earth cations for improved corrosion protection of galvanized steel substrates. Prog Org Coat 57:67–77. https://doi.org/10.1016/j.porgcoat.2006.06.00910.1016/j.porgcoat.2006.06.009 ↗
34. Montemor MF, Ferreira MGS (2008) Analytical characterisation of silane films modified with cerium activated nanoparticles and its relation with the corrosion protection of galvanised steel substrates. Prog Org Coat 63:330–337. https://doi.org/10.1016/j.porgcoat.2007.11.00810.1016/j.porgcoat.2007.11.008 ↗
35. Hoebbel D, Nacken M, Schmidt H (1998) A NMR study on the hydrolysis, condensation and epoxide ring-opening reaction in sols and gels of the system glycidoxypropyltrimethoxysilane-water-titaniumtetraethoxide. J Sol-Gel Sci Technol 12:169–179. https://doi.org/10.1023/A:100869820129810.1023/A:1008698201298 ↗
36. Yasakau KA, Zheludkevich ML, Karavai OV, Ferreira MGS (2008) Influence of inhibitor addition on the corrosion protection performance of sol-gel coatings on AA2024. Prog Org. Coatings 63:352–361. https://doi.org/10.1016/j.porgcoat.2007.12.00210.1016/j.porgcoat.2007.12.002 ↗
37. Voevodin NN, Grebasch NT, Soto WS et al. (2001) An organically modified zirconate film as a corrosion-resistant treatment for aluninum 2024-T3. Prog Org Coatings 41:287–29310.1016/S0300-9440(01)00156-4 ↗
38. Hoebbel D, Nacken M, Schmidt H (2001) On the influence of metal alkoxides on the epoxide ring-opening and condensation reactions of 3-glycidoxypropyltrimethoxysilane. J Sol-Gel Sci Technol 21:177–187. https://doi.org/10.1023/A:101127430189610.1023/A:1011274301896 ↗
39. Galio AF, Lamaka SV, Zheludkevich ML et al. (2010) Inhibitor-doped sol–gel coatings for corrosion protection of magnesium alloy AZ31. Surf Coat Technol 204:1479–1486. https://doi.org/10.1016/j.surfcoat.2009.09.06710.1016/j.surfcoat.2009.09.067 ↗
40. Lamaka SV, Montemor MF, Galio AF et al. (2008) Novel hybrid sol-gel coatings for corrosion protection of AZ31B magnesium alloy. Electrochim Acta 53:4773–4783. https://doi.org/10.1016/j.electacta.2008.02.01510.1016/j.electacta.2008.02.015 ↗
41. Kasemann R, Schmidt H (1994) Coatings for mechanical and chemical protection based on organic-inorganic sol-gel nanocomposites. New J Chem 18:1117–1123
42. Agustin Saenz C, Santa Coloma Mozo P, Martin Ugarte E, Brizuela Parra M (2016) A hybrid sol-gel corrosion-resistant coating composition. Patent Application EP16382471
43. Scriven L (1988) Physics and applications of dip coating and spin coting. MRS Proceedings, 121. https://doi.org/10.1557/PROC-121-71710.1557/PROC-121-717 ↗
44. Faustini M, Louis B, Albouy PA et al. (2010) Preparation of sol-gel films by dip-coating in extreme conditions. J Phys Chem C 114:7637–7645. https://doi.org/10.1021/jp911475510.1021/jp9114755 ↗
45. Orgaz-Orgaz F (1988) Gel to glass conversion: densification kinetics and controlling mechanisms. J Non Cryst Solids 100:115–14110.1016/0022-3093(88)90010-5 ↗
46. Brinker JC, Scherer GW (1985) Sol-Gel-Glass: I. Gelation and gel structure. J Non Cryst Solids 70:301–32210.1016/0022-3093(85)90103-6 ↗
47. Brinker JC, Roth EP, Scherer GW, Tallant DR (1985) Structural evolution during the gel to glass conversion. J Non Cryst Solids 71:171–18510.1016/0022-3093(85)90286-8 ↗
48. Kasemann R, Schmidt HK, Wintrich E (1994) A new type of a sol-gel-derived inorganic-organic nanocomposite. MRS Proc 346:915. https://doi.org/10.1557/PROC-346-91510.1557/PROC-346-915 ↗
49. Schmidt H, Seiferling B, Schmidt H et al. (1986) Chemistry and applications of inorganic-organic polymers (organically modified silicates). MRS Proc 73:739. https://doi.org/10.1557/PROC-73-73910.1557/PROC-73-739 ↗
50. Schmidt HK (1997) Organically modified silicates and ceramics as two-phasic systems: Synthesis and processing. J Sol-Gel Sci Technol 8:557–565. https://doi.org/10.1007/BF0243689910.1007/BF02436899 ↗
51. Daniels MW, Francis LF (1998) Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxysilane-modified colloidal silica coatings. J Colloid Interface Sci 205:191–20010.1006/jcis.1998.5671 ↗
52. Templin M, Wiesner U, Spiesss HW (1997) Multinuclear solid-state-NMR studies of hybrid organic-inorganic materials. Adv Mater 9:814–817. https://doi.org/10.1002/adma.1997009101110.1002/adma.19970091011 ↗
53. Horr TJ, Reynolds GD (1997) The reactions of 3-glycidoxypropyltrimethoxysilane in acidic solutions on polymerization and in the presence of silica. J Adhes Sci Technol 11:995–1009. https://doi.org/10.1163/156856197X0055210.1163/156856197X00552 ↗
54. Wegler R (1955) Chemie der Polyepoxyde. Angew Chem 67:582–592. https://doi.org/10.1002/ange.1955067190710.1002/ange.19550671907 ↗
55. Philipp G, Schmidt H (1984) New materials for contact lenses prepared from Si- and Ti-alkoxides by the sol-gel process. J Non Cryst Solids 63:283–292. https://doi.org/10.1016/0022-3093(84)90407-110.1016/0022-3093(84)90407-1 ↗
56. Zhang XG (1996) Corrosion and electrochemistry of zinc. Plenum Press, New York10.1007/978-1-4757-9877-7 ↗
57. Fedel M, Callone E, Diré S et al. (2014) Effect of Na-Montmorillonite sonication on the protective properties of hybrid silica coatings. Electrochim Acta 124:90–99. https://doi.org/10.1016/j.electacta.2013.11.00610.1016/j.electacta.2013.11.006 ↗
58. Hirschorn B, Orazem ME, Tribollet B et al. (2010) Determination of effective capacitance and film thickness from constant-phase-element parameters. Electrochim Acta 55:6218–6227. https://doi.org/10.1016/j.electacta.2009.10.06510.1016/j.electacta.2009.10.065 ↗