Spectroellipsometric Characterization of Multilayer Sol-Gel Fe2O3 Films
Source abstract
Abstract
Multilayer Fe 2 O 3 films were deposited by the sol-gel method on glass substrates using three successive deposition procedures. The films were thermally treated for 1 h at 300°C. The optical and microstructural properties of these films were investigated by spectroscopic ellipsometry (SE) in the 500-1000 nm range. The optical gap was found by fitting the dispersion of the film refractive index (n) with the Wemple-DiDomenico (WDD) formula. The ellipsometric measurements showed also that the Fe 2 O 3 films are anisotropic. The birefringence values (An) of the sol-gel films (0.05-0.08) are smaller than the large values of the Fe 2 O 3 (which are around 0.28) but increase with the crystalization of the films. AFM mesurements showed that the films treated at 300°C start to crystallize.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Iron oxide chemistry and applications · Surface Roughness and Optical Measurements · Electrostatics and Colloid Interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. X.Q. Liu, S.W. Tao, and Y.S. Shen, Sensors and Actuators B-Chemical 40, 161 (1997).10.1016/S0925-4005(97)80256-0 ↗
2. S.Y. Wang, W. Wang, W.Z. Wang-, Z. Jiao, J.H. Liu, and Y.T. Qian, Sensors and Actuators B-Chemical 69, 22 (2000).10.1016/S0925-4005(00)00304-X ↗
3. B. Pejova, M. Najdoski, I. Grozdanov, and A. Isahi, Journal of Materials Science-Materials in Electronics 11, 405 (2000).10.1023/A:1008967205035 ↗
4. M.A. Aegerter, C.O. Avellaneda, A. Pawlicka, and M. Atik, Journal of Sol-Gel Science and Technology 8, 689 (1997).10.1023/A:1018392831165 ↗
5. T. Maruyama and T. Kanagawa, Journal of the Electrochemical Society 143, 1675 (1996).10.1149/1.1836697 ↗
6. H. Kim, N. Akao, N. Hara, and K. Sugimoto, Journal of the Japan Institute of Metals 60, 600 (1996).
7. K. Sugimoto, H. Kim, N. Akao, and N. Hara, in Proceedings of the Symposium on Surface Oxide Films, 1996, edited by J.A. Bardwell (Electrochemical Society Inc., Pennington (Series: Electrochemical Society Series, Vol. 96), p. 194.
8. T. Hashimoto, T. Yamada, and T. Yoko, Journal of Applied Physics 80, 3184 (1996).10.1063/1.363258 ↗
9. W.G. Lu, D.Q. Yang, Y. Sun, Y. Guo, S.P. Xie, and H.L. Li, Applied Surface Science 147, 39 (1999).10.1016/S0169-4332(98)00921-0 ↗
10. P. Chauhan, S. Annapoorni, and S.K. Trikha, Thin Solid Films 346, 266 (1999).10.1016/S0040-6090(98)01771-4 ↗
11. D. Bersani, P.P. Lottici, and A. Montenero, Journal of Materials Science 35, 4301 (2000).10.1023/A:1004884302755 ↗
12. Z. Jiao, S.Y. Wang, L.F. Bian, and J.H. Liu-JH, Materials Research Bulletin 35, 741 (2000).10.1016/S0025-5408(00)00264-6 ↗
13. T. Hashimoto, T. Yoko, and S. Sakka, J. Ceramic Soc. Japan 101, 64 (1993).10.2109/jcersj.101.64 ↗
14. T. Yoko, K. Kamiya, K. Tanaka, and S. Sakka, Bull. Inst. Chem. Res. Kyoto. Univ. 67, 249 (1989).
15. N. Takahashi, N. Kakuta, A. Uenn, K. Yamagichi, T. Fuji, T. Mizushima, and Y. Udagawa, J. Mater. Sci. 26, 497 (1991).10.1007/BF00576549 ↗
16. D.A.G. Bruggeman, Ann. Phys. 24, 6362 (1935).
17. S.H. Wemple and M. DiDomenico, Phys. Rev. B 3, 1338 (1971).10.1103/PhysRevB.3.1338 ↗