Study of thermal conductivity and effect of humidity on HMDZ modified TEOS based aerogel dried at ambient pressure
Source abstract
Abstract
The experimental results on the study of thermal conductivity and effect of humidity on HMDZ modified TEOS based aerogels dried at ambient pressure, are reported. Silica sol was prepared by keeping the MeOH/TEOS molar ratio, Acidic water (Oxalic acid) and basic water (NH4OH) concentrations constant at 16.5, 0.001 and 1 M, respectively throughout the experiments and the HMDZ/TEOS molar ratio (h) was varied from 0.34 to 2.1. Finally, the surface modified wet gels were dried at an ambient pressure. The thermal conductivity of the aerogel samples was measured. Further, the humidity study was carried out in 80% humid surrounding at 30 °C temperature over 80 days. The best quality aerogels in terms of low bulk density, thermal conductivity and durability (no moisture absorption) with an only 2% of weight gain were obtained for TEOS: MeOH: Acidic H2O: Basic H2O: HMDZ molar ratio at 1:16.5:0.81:0.50:0.681, respectively. The thermal stability and hydrophobicity of the aerogel have been confirmed with Thermo gravimetric and Differential Thermal (TG–DT) analyses and Fourier Transform Infrared Spectroscopy (FTIR), respectively. Microstructural studies were carried out by Scanning Electron microscopy (SEM).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Advanced Sensor and Energy Harvesting Materials · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Carlson PJ, Johansson KE, Norrolo JK, Pingot O, Tavernier S, Van den Bogert F, Van Luncker L (1979) Nucl Instrum Methods 160:407. doi: 10.1016/0029-554X(79)90193-910.1016/0029-554X(79)90193-9 ↗
2. Buzykaev AR, Danilyuk AF, Ganzbur SF, Gorodtskaya TA, Kolachev GM, Kravchenko EA, Mikerov VI, Minakov GD, Onuchin AP, Shamov AG, Tayursky VA (1998) J Non-Cryst Solids :22510.1016/S0022-3093(98)00326-3 ↗
3. Tilllotson TM, Hrubesh LW, Simpon RL, Lee RS, Swansiger RW (1998) J Non-Cryst solids 225:35810.1016/S0022-3093(98)00055-6 ↗
4. Jang KY, Kim K, Upadhye RS (1990) J Vac Sci Technol A 8(3):1732. doi: 10.1116/1.57683910.1116/1.576839 ↗
5. Caps R, Fricke JF (1986) Sol Energy 26:361. doi: 10.1016/0038-092X(86)90153-210.1016/0038-092X(86)90153-2 ↗
6. Harnath D, Wagh PB, Pajonk GM, Rao AV (1997) Mater Res Bull 32(8):1079. doi: 10.1016/S0025-5408(97)00086-X10.1016/S0025-5408(97)00086-X ↗
7. Pajonk GM (1991) Appl Catal 72:217. doi: 10.1016/0166-9834(91)85054-Y10.1016/0166-9834(91)85054-Y ↗
8. Pajonk GM, Teichner SJ (1985) In: Fricke J (ed) Proceeding of the first International Symposium on Aerogels, Wurzburg, Germany, 23–25, September 1985, p. 193
9. Smith DM, Maskara A, Bose U (1998) J Non-Cryst Solids 225:254. doi: 10.1016/S0022-3093(98)00125-210.1016/S0022-3093(98)00125-2 ↗
10. Gross J, Fricke J (1992) J Non-Cryst Solids 145:217. doi: 10.1016/S0022-3093(05)80459-410.1016/S0022-3093(05)80459-4 ↗
11. Carslaw HS, Jaeger JC (1959) Conduction of Heat in Solids, 2nd edn. Oxford University Press, Oxford, p 344
12. Hegade ND, Venkateswara Rao A (2007) Applied Surface Sci
13. Rao AV, Kalesh RR, Panjonk GM (2003) J Mater Sci 38:440710.1023/A:1026311905523 ↗