journal article·2003-06

Effect of Sintering Temperature on the Corrosion and Wear Behavior of Protective SiO2-Based Sol-Gel Coatings

J. Gallardo, A. Duran, I. Garcia, J.P. Celis, M.A. Arenas, A. Conde

Publisher page

Abstract

Sol-gel hybrid organic-inorganic and inorganic SiO2-based protective coatings with and without added 3 μm glass particles were developed and tested for their corrosion and wear behavior of an stainless steel substrate (AISI316L). The corrosion resistance greatly increases by incorporating glass particles in the sols. The incorporation of particles in the coatings allows the synthesis of thicker crack-free coatings. On the other hand, the corrosion resistance increases for coatings with a higher organic content obtained at lower sintering temperature. These coatings are also highly stable in saline aqueous solutions. However, the wear resistance is badly affected by the hybrid character of the SiO2 matrix. The optimum coating process in terms of corrosion and wear resistance, appears to be a hybrid system with a dense SiO2 network achieved at intermediate sintering temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Tribology and Wear Analysis · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. C.J. Brinker and G.W. Scherer, Sol-Gel Science: The Physics and Chemistry of Sol-Gel Processing (Academic Press, San Diego, 1990), pp. 787 and 839–880.
2. O de Sanctis, L. Gómez, A. Marajofsky, C. Parodi, N. Pellegri, and A. Durán, J. Non-Cryst. Solids 121, 315 (1990).10.1016/0022-3093(90)90155-F ↗
3. M. Guglielmi, J. Sol-Gel Sci. Technol. 8, 443 (1997).10.1023/A:1018373404815 ↗
4. P. Innocenzi, M. Guglielmi, M. Gobbin, and P. Colombo, J. Eur. Ceram. Soc. 10, 431 (1992).10.1016/0955-2219(92)90018-9 ↗
5. K. Izumi, H. Tanaka, Y. Uchida, N. Tohge, and T. Minami, J. Mater. Sci. Lett. 12, 724 (1993).10.1007/BF00626699 ↗
6. V.J. Wen, V.J. Vasudevan, and G.L. Wilkes, J. Sol-Gel Sci. Technol. 5, 115 (1995).10.1007/BF00487727 ↗
7. P. Galliano, J. de Damborenea, M.J. Pascual, and A. Durán, J. Sol-Gel Sci. Technol. 13, 723 (1998).10.1023/A:1008653208083 ↗
8. P. Innocenzi, M.O. Abdirashid, and M. Guglielmi, J. Sol-Gel Sci. Technol. 3, 47 (1994).10.1007/BF00490148 ↗
9. J. Oh, H. Imai, and K. Tsukuma, J. Mater. Res. 12, 1008 (1997).10.1557/JMR.1997.0141 ↗
10. H. Schmidt, J. Non-Cryst. Solids 73, 681 (1985).10.1016/0022-3093(85)90388-6 ↗
11. J.D. Mackenzie, J. Sol-Gel Sci. Technol. 2, 81 (1994).10.1007/BF00486217 ↗
12. A. Durán, Bol. Soc. Esp. Ceram. Vidr. 25, 395 (1986).
13. M. Guglielmi, J. Sol-Gel Sci. Technol. 8, 443 (1997).10.1023/A:1018373404815 ↗
14. P. Galliano, J. de Damborenea, M.J. Pascual, and A. Durán, J. Sol-Gel Sci. Technol. 13, 723 (1998).10.1023/A:1008653208083 ↗
15. J. Gallardo, P. Galliano, R. Moreno, and A. Durán, J. Sol-Gel Sci. Technol. 19, 107 (2000).10.1023/A:1008726608539 ↗
16. K. Katagiri, K. Hasegawa, and T. Minami, J. Am. Ceram. Soc. 81, 2501 (1998).10.1111/j.1151-2916.1998.tb02653.x ↗
17. M. Mennig, G. Jonschker, and H. Schmidt, SPIE 1758, 125 (1992).
18. H. Schmidt, SPIE 1758, 396 (1992).
19. J. Gallardo, P. Galliano, A. Durán, and J.J. de Damborenea. Submitted to Corrosion Science.
20. O. de Sanctis and N. Pellegri, A. Durán Surface and coating Technology 70, 251–255 (1995).10.1016/0257-8972(94)02274-T ↗
21. H. Mohrbacher, J.-P. Celis, and J.R. Roos, Tribology International 28(5), 269 (1995).10.1016/0301-679X(95)00005-O ↗
22. J. Gallardo, P. Galliano, R. Moreno, and A. Durán, J. Sol-Gel. Sci. Technol. 19, 107 (2000).10.1023/A:1008726608539 ↗
23. J. Gallardo, P. Galliano, and A. Durán, J. Sol-Gel. Sci. Technol. 19, 393 (2000).10.1023/A:1008778909389 ↗
24. J. Gallardo, A. Durán, D. Di Martino, and R. M. Almeida. J. Non-Cryst. Solids 298, 219 (2002).10.1016/S0022-3093(02)00921-3 ↗