On the presence of work-hardened zones around fibers in a short-fiber-reinforced Al metal matrix composite

Abstract Dislocation densities are investigated in a short-fiber-reinforced Al–11 wt.% Zn–0.2 wt.% Mg metal matrix composite (MMC) with a special focus on regions near the fiber–matrix interfaces. Clear microstructural evidence is provided for the formation of work-hardened zones (WHZs) around fibers during creep using transmission electron microscopy (TEM). The dislocation densities in the WHZs are higher after creep than after squeeze casting, where the plastic strains associated with the thermal stresses that build up during solidification also result in an increased dislocation density close to fibers. The effect of heating and cooling on the dislocation substructure is also considered. The results are discussed in light of previous findings and provide microstructural evidence for the presence of WHZs as predicted by the Dlouhy model of MMC creep.