High-temperature properties of Al2O3/SiO2 composites
Source abstract
Abstract
In this study, Al2O3 fiber-reinforced silica matrix composites were fabricated by traditional sol–gel process. To study the mechanical properties of Al2O3/SiO2 composites under high-temperature environment and after high-temperature treatment, the tensile strength and fracture behavior of it under high temperatures were investigated, and their flexural strength after heat treatment at various temperatures was also examined. Our results indicated that the tensile strength of original composites was 85.6 MPa, and that at 1000, 1100, 1200, and 1300 °C was 77.5, 62.5, 52.5, and 40.2 MPa, respectively. The flexural strength of original composites was 78.1 MPa, and that after heat treatment at 1100, 1300, and 1500 °C was 45.5, 40.5, and 27.9 MPa, respectively. The composites exhibited ductile fracture after tensile tests, and still maintain high tensile strength of about 50% even at 1300 °C. What is more, the composites exhibited brittle fracture after heat treatment, with no formation of new phase after heat treatment. In conclusion, our findings suggested that Al2O3/SiO2 composites display outstanding high-temperature properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Savino R, Criscuolo L, Martino GDD, Mungiguerra S (2018) Aero-thermo-chemical characterization of ultra-high-temperature ceramics for aerospace applications. J Eur Ceram Soc 38:2937–2953. https://doi.org/10.1016/j.jeurceramsoc.2017.12.04310.1016/j.jeurceramsoc.2017.12.043 ↗
2. Li S, Feng Z, Liu Y et al. (2010) Microstructural evolution of coating-modified 3D C/SiC composites after annealing in wet oxygen at different temperatures. Corros Sci 52:2873–2845. https://doi.org/10.1016/j.corsci.2010.04.03210.1016/j.corsci.2010.04.032 ↗
3. Singha P, Pungotrab H et al. (2017) On the characteristics of titanium alloys for the aircraft applications. Mater Today: Proc 4:8971–8982. https://doi.org/10.1016/j.matpr.2017.07.24910.1016/j.matpr.2017.07.249 ↗
4. Acrobello Variese F, Tului M, Sabbadini S et al. (2013) Optimized coating procedure for the protection of TiAl intermetallic alloy against high temperature oxidation. Intermetallics 37:76–82. https://doi.org/10.1016/j.intermet.2013.02.00110.1016/j.intermet.2013.02.001 ↗
5. Yang X, Qin W, ZhiHang P, Feng C (2016) High-temperature properties of 2.5D SiO2f/SiO2 composites by sol–gel. Ceram Int 42:12802–12806. https://doi.org/10.1016/j.ceramint.2016.05.04310.1016/j.ceramint.2016.05.043 ↗
6. Li M, Zhou X, Yang H et al. (2016) The effect of the PyC interphase coating on the microwave heating sintered SiC/SiC composites. J Alloy Compd 688:974–981. https://doi.org/10.1016/j.jallcom.2016.07.28810.1016/j.jallcom.2016.07.288 ↗
7. Tonga Y, Zhua W, Baib S, Hua Y, Xiea X, Li Y (2018) Thermal shock resistance of continuous carbon fiber reinforced ZrC based ultra-high temperature ceramic composites prepared via Zr-Si alloyed melt infiltration. Mater Sci Eng: A 735:166–172. https://doi.org/10.1016/j.msea.2018.08.03610.1016/j.msea.2018.08.036 ↗
8. Yang X, Qing W, Zhi-hang P, Feng C (2016) High-temperature properties of 2.5D SiO2f/SiO2 composites by sol–gel. Ceram Int 42:12802–12806. https://doi.org/10.1016/j.ceramint.2016.05.04310.1016/j.ceramint.2016.05.043 ↗
9. Xu ZR, Chawla KK, Li X (1993) Effect of high temperature exposure on the tensile strength of alumina fiber Nextel 610. Mater Sci Eng: A 177:249–256. https://doi.org/10.1016/0921-5093(93)90412-810.1016/0921-5093(93)90412-8 ↗
10. Zhang H, Zhang Y et al. (2015) Preparation and characterization of continuous alumina based fiber reinforced with orientated mullite whisker. Chem Eng J 268:109–115. https://doi.org/10.1016/j.cej.2014.12.10110.1016/j.cej.2014.12.101 ↗
11. Zou CR, Bin L, Meng XJ et al. (2018) Ablation behavior and mechanism of SiO2f/SiO2, SiO2f/BN and Si3N4f/BN radar wave transparent composites. Corros Sci 139:243–254. https://doi.org/10.1016/j.corsci.2018.05.00610.1016/j.corsci.2018.05.006 ↗
12. Zhang J, Fan JP, Zhang JY et al. (2018) Developing and preparing interfacial coatings for high tensile strength silicon nitride fiber reinforced silica matrix composites. Ceram Int 44:5297–5303. https://doi.org/10.1016/j.ceramint.2017.12.14310.1016/j.ceramint.2017.12.143 ↗
13. Gao TQ, Zhao Y, Zhou GH et al. (2015) Fabrication and characterization of three dimensional woven carbon fiber/silica ceramic matrix composites. Compos Part B: Eng 77:122–128. https://doi.org/10.1016/j.compositesb.2015.02.02410.1016/j.compositesb.2015.02.024 ↗
14. Moser B, Rossoll A, Weber L et al. (2001) Nextel™ 610 alumina fibre reinforced aluminium: influence of matrix and process on flow stress. Compos Part A: Appl Sci Manuf 32:1067–1075. https://doi.org/10.1016/S1359-835X(00)00178-010.1016/S1359-835X(00)00178-0 ↗
15. Xiao H, Wu JM, Chen AN et al. (2017) Alumina fiber-reinforced silica matrix composites with improved mechanical properties prepared by a novel DCC-HVCI method. Ceram Int 43:12802–12806. https://doi.org/10.1016/j.ceramint.2017.09.02310.1016/j.ceramint.2017.09.023 ↗
16. Chawla KK (2008) Interface engineering in mullite fiber/mullite matrix composites. J Eur Ceram Soc 28:447–453. https://doi.org/10.1016/j.jeurceramsoc.2007.03.00810.1016/j.jeurceramsoc.2007.03.008 ↗
17. Wang Y, Liu HT et al. (2015) Interface engineering of fiber-reinforced all-oxide composites fabricated by the sol–gel method with fugitive pyrolytic carbon coatings. Compos Part B: Eng 75:86–94. https://doi.org/10.1016/j.compositesb.2015.01.01810.1016/j.compositesb.2015.01.018 ↗
18. Xiang Y, Wang Q, Cao F, Ma YW, Quan D-l (2017) Sol-gel process and high-temperature property of SiO2/ZrO2-SiO2 composites. Ceram Int 43:854–859. https://doi.org/10.1016/j.ceramint.2016.10.02010.1016/j.ceramint.2016.10.020 ↗
19. Esmaeili AR, Mir N et al. (2020) A facile, fast, and low-cost method for fabrication of micro/nano-textured superhydrophobic surfaces. J Colloid Int Sci 573:317–327. https://doi.org/10.1016/j.jcis.2020.04.02710.1016/j.jcis.2020.04.027 ↗
20. Liu H, Yang Z, Yuan HA. (2020) Novel elastoplastic constitutive model for woven oxide/oxide ceramic matrix composites with aniso tropic hardening. Compos Struct 229. https://doi.org/10.1016/j.compstruct.2019.11142010.1016/j.compstruct.2019.111420 ↗
21. Ben Ramdane C, Julian-Jankowiak A, Valle R et al. (2017) Microstructure and mechanical behaviour of a Nextel™ 610/alumina weak matrix composite subjected to tensile and compressive loadings J Eur Ceram Soc 37:2919–2932. https://doi.org/10.1016/j.jeurceramsoc.2017.02.04210.1016/j.jeurceramsoc.2017.02.042 ↗
22. Yang Z, Liu H (2020) Effects of thermal aging on the cyclic thermal shock behavior of oxide/oxide ceramic matrix composites. Mater Sci Eng: A 769. https://doi.org/10.1016/j.msea.2019.13849410.1016/j.msea.2019.138494 ↗
23. Schmücker M, Flucht F et al. (2012) Degradation of oxide fibers by thermal overload and environmental effects. Mater Sci Eng: A 557:10–16. https://doi.org/10.1016/j.msea.2012.05.10710.1016/j.msea.2012.05.107 ↗
24. Yang LW, Wang JY et al. (2017) Sol-gel temperature dependent ductile-to-brittle transition of aluminosilicate fiber reinforced silica matrix composite. Compos Part B: Eng 119:79–89. https://doi.org/10.1016/j.compositesb.2017.03.04310.1016/j.compositesb.2017.03.043 ↗