Sol-gel technologies for additive manufacturing glass materials
Source abstract
Abstract
Abstract The sol-gel method has shown immense potential in materials science and nanotechnology. One of the cornerstone applications of the sol-gel technique includes the fabrication of inorganic glasses and glass-ceramics at relatively low temperatures as an alternative to conventional high-temperature melt-quench techniques. In recent times, glass fabrication with the sol-gel method has extended to additive manufacturing (AM), also referred to as 3D printing. Current sol-gel, glass AM uses solution-based gel compositions to produce three-dimensional glasses through layer-by-layer deposition and/or using photocurable polymer resins. Owing to its significant advantages of being able to fabricate glass components with arbitrary and complex geometry, AM presents a tantalizing opportunity to fabricate functionalized glass materials, increasing the technique’s popularity over the past decade. In this review and perspective, recent progress in combining sol-gel synthesis and additive manufacturing technologies used for obtaining inorganic glasses are discussed, specifically highlighting the research carried out in North America, and a prospectus of the field and emerging areas of interest and need is presented. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aerogels and thermal insulation · Silicone and Siloxane Chemistry · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Sakka S (2016) History of the sol–gel chemistry and technology. In: Klein L, Aparicio M, Jitianu A (eds) Handbook of sol-gel science and technology, 1st edn. Springer International Publishing, Cham, pp 1–2710.1007/978-3-319-19454-7_87-1 ↗
2. Brinker CJ, Scherer GW (1985) Sol → gel → glass: I. Gelation and gel structure. J Non Cryst Solids 70:301–322. https://doi.org/10.1016/0022-3093(85)90103-610.1016/0022-3093(85)90103-6 ↗
3. Brinker CJ, Scherer GW (1990) Sol-gel science: the physics and chemistry of sol-gel processing. Academic Press, Boston, MA, USA
4. Avnir D (1995) Organic chemistry within ceramic matrixes: doped sol-gel materials. Acc Chem Res 28:328–334. https://doi.org/10.1021/ar00056a00210.1021/ar00056a002 ↗
5. Wen J, Wilkes GL (1996) Organic/inorganic hybrid network materials by the sol-gel approach. Chem Mater 8:1667–1681. https://doi.org/10.1021/cm960114310.1021/cm9601143 ↗
6. Danks AE, Hall SR, Schnepp Z (2016) The evolution of ‘sol–gel’ chemistry as a technique for materials synthesis. Mater Horiz 3:91–112. https://doi.org/10.1039/C5MH00260E10.1039/C5MH00260E ↗
7. Sumida K, Liang K, Reboul J et al. (2017) Sol-gel processing of metal-organic frameworks. Chem Mater 29:2626–2645. https://doi.org/10.1021/acs.chemmater.6b0393410.1021/acs.chemmater.6b03934 ↗
8. Roy R (1969) Gel route to homogeneous glass preparation. J Am Ceram Soc 52:344–344. https://doi.org/10.1111/j.1151-2916.1969.tb11945.x10.1111/j.1151-2916.1969.tb11945.x ↗
9. Roy R (2010) Glass science and glassmaking: a personal perspective. Int J Appl Glass Sci 1:3–15. https://doi.org/10.1111/j.2041-1294.2010.00002.x10.1111/j.2041-1294.2010.00002.x ↗
10. Sakka S (2022) Birth of the sol–gel method: early history. J Sol Gel Sci Technol 102:478–481. https://doi.org/10.1007/s10971-021-05640-910.1007/s10971-021-05640-9 ↗
11. Dislich H, Hinz P (1982) History and principles of the sol-gel process, and some new multicomponent oxide coatings. J Non Cryst Solids 48:11–16. https://doi.org/10.1016/0022-3093(82)90242-310.1016/0022-3093(82)90242-3 ↗
12. Brinker CJ, Mukherjee SP (1981) Conversion of monolithic gels to glasses in a multicomponent silicate glass system. J Mater Sci 16:1980–1988. https://doi.org/10.1007/BF0054064610.1007/BF00540646 ↗
13. Yoshida M, Prasad PN (1996) Sol-gel-processed SiO2/TiO2/Poly(vinylpyrrolidone) composite materials for optical waveguides. Chem Mater 8:235–241. https://doi.org/10.1021/cm950331o10.1021/cm950331o ↗
14. Aegerter MA (2004) Sol-gel technologies for glass producers and users. Springer, New York, NY, USA10.1007/978-0-387-88953-5 ↗
15. Pénard A-L, Gacoin T, Boilot J-P (2007) Functionalized sol-gel coatings for optical applications. Acc Chem Res 40:895–902. https://doi.org/10.1021/ar600025j10.1021/ar600025j ↗
16. Kang DJ, Bae B-S (2007) Photo-imageable sol-gel hybrid materials for simple fabrication of micro-optical elements. Acc Chem Res 40:903–912. https://doi.org/10.1021/ar600043910.1021/ar6000439 ↗
17. Gurav JL, Jung I-K, Park H-H, et al (2010) Silica aerogel: synthesis and applications. J Nanomater 2010. https://doi.org/10.1155/2010/40931010.1155/2010/409310 ↗
18. Liu P, Gao H, Chen X et al. (2020) In situ one-step construction of monolithic silica aerogel-based composite phase change materials for thermal protection. Compos B Eng 195:108072. https://doi.org/10.1016/j.compositesb.2020.10807210.1016/j.compositesb.2020.108072 ↗
19. Bokov D, Turki Jalil A, Chupradit S et al. (2021) Nanomaterial by sol‐gel method: synthesis and application. Adv Mater Sci Eng 2021:5102014. https://doi.org/10.1155/2021/510201410.1155/2021/5102014 ↗
20. Borlaf M, Moreno R (2021) Colloidal sol-gel: a powerful low-temperature aqueous synthesis route of nanosized powders and suspensions. Open Ceram 8:100200. https://doi.org/10.1016/j.oceram.2021.10020010.1016/j.oceram.2021.100200 ↗
21. Gash AE, Tillotson TM, Satcher Jr JH et al. (2001) New sol–gel synthetic route to transition and main-group metal oxide aerogels using inorganic salt precursors. J Non Cryst Solids 285:22–28. https://doi.org/10.1016/S0022-3093(01)00427-610.1016/S0022-3093(01)00427-6 ↗
22. Pierre AC, Pajonk GM (2002) Chemistry of aerogels and their applications. Chem Rev 102:4243–4266. https://doi.org/10.1021/cr010130610.1021/cr0101306 ↗
23. Alberti S, Jágerská J (2021) Sol-gel thin film processing for integrated waveguide sensors. Front Mater 8:629822. https://doi.org/10.3389/fmats.2021.62982210.3389/fmats.2021.629822 ↗
24. Hong J-K, Kim H-R, Park H-H (1998) The effect of sol viscosity on the sol–gel derived low density SiO2 xerogel film for intermetal dielectric application. Thin Solid Films 332:449–454. https://doi.org/10.1016/S0040-6090(98)01045-110.1016/S0040-6090(98)01045-1 ↗
25. Detty MR, Ciriminna R, Bright FV, Pagliaro M (2014) Environmentally benign sol–gel antifouling and foul-releasing coatings. Acc Chem Res 47:678–687. https://doi.org/10.1021/ar400240n10.1021/ar400240n ↗
26. Greenhalgh RD, Ambler WS, Quinn SJ et al. (2017) Hybrid sol–gel inorganic/gelatin porous fibres via solution blow spinning. J Mater Sci 52:9066–9081. https://doi.org/10.1007/s10853-017-0868-110.1007/s10853-017-0868-1 ↗
27. Mazrouei-Sebdani Z, Naeimirad M, Peterek S et al. (2022) Multiple assembly strategies for silica aerogel-fiber combinations—a review. Mater Des 223:111228. https://doi.org/10.1016/j.matdes.2022.11122810.1016/j.matdes.2022.111228 ↗
28. Larsen G, Gonzalez D, Noriega S, Ragusa J (2024) Twenty years of making inorganic ultrafine fibers via electrospinning and sol–gel techniques I: an update on catalysis, photocatalysis, and adsorption R&D opportunities. Chem Eng Commun 211:1469–1493. https://doi.org/10.1080/00986445.2024.234791510.1080/00986445.2024.2347915 ↗
29. El Hamzaoui H, Bigot L, Bouwmans G et al. (2011) From molecular precursors in solution to microstructured optical fiber: a sol-gel polymeric route. Opt Mater Express 1:234. https://doi.org/10.1364/OME.1.00023410.1364/OME.1.000234 ↗
30. Righini GC, Armellini C, Ferrari M et al. (2023) Sol–gel photonic glasses: from material to application. Materials 16:2724. https://doi.org/10.3390/ma1607272410.3390/ma16072724 ↗
31. Frazier WE (2014) Metal additive manufacturing: a review. J Mater Eng Perform 23:1917–1928. https://doi.org/10.1007/s11665-014-0958-z10.1007/s11665-014-0958-z ↗
32. Fidan I, Huseynov O, Ali MA et al. (2023) Recent inventions in additive manufacturing: holistic review. Inventions 8:103. https://doi.org/10.3390/inventions804010310.3390/inventions8040103 ↗
33. Tan LJ, Zhu W, Zhou K (2020) Recent progress on polymer materials for additive manufacturing. Adv Funct Mater 30:2003062. https://doi.org/10.1002/adfm.20200306210.1002/adfm.202003062 ↗
34. Pal AK, Mohanty AK, Misra M (2021) Additive manufacturing technology of polymeric materials for customized products: recent developments and future prospective. RSC Adv 11:36398–36438. https://doi.org/10.1039/D1RA04060J10.1039/D1RA04060J ↗
35. Cooke S, Ahmadi K, Willerth S, Herring R (2020) Metal additive manufacturing: technology, metallurgy and modelling. J Manuf Process 57:978–1003. https://doi.org/10.1016/j.jmapro.2020.07.02510.1016/j.jmapro.2020.07.025 ↗
36. Lakhdar Y, Tuck C, Binner J et al. (2021) Additive manufacturing of advanced ceramic materials. Prog Mater Sci 116:100736. https://doi.org/10.1016/j.pmatsci.2020.10073610.1016/j.pmatsci.2020.100736 ↗
37. Wang Y, Zhou Y, Lin L et al. (2020) Overview of 3D additive manufacturing (AM) and corresponding AM composites. Compos Part A Appl Sci Manuf 139:106114. https://doi.org/10.1016/j.compositesa.2020.10611410.1016/j.compositesa.2020.106114 ↗
38. Klein J, Stern M, Franchin G et al. (2015) Additive manufacturing of optically transparent glass. 3D Print Addit Manuf 2(3):92–105. https://doi.org/10.1089/3dp.2015.002110.1089/3dp.2015.0021 ↗
39. Luo J, Pan H, Kinzel EC (2014) Additive manufacturing of glass. J Manuf Sci Eng 136:1–6. https://doi.org/10.1115/1.402853110.1115/1.4028531 ↗
40. Jackson B (2016) Micron3DP & MIT 3D printing in molten glass. 3dprintingindustry.com
41. Datsiou KC, Saleh E, Spirrett F et al. (2019) Additive manufacturing of glass with laser powder bed fusion. J Am Ceram Soc 102:4410–4414. https://doi.org/10.1111/jace.1644010.1111/jace.16440 ↗
42. Zhang D, Liu X, Qiu J (2021) 3D printing of glass by additive manufacturing techniques: a review. Front Optoelectron 14:263–277. https://doi.org/10.1007/s12200-020-1009-z10.1007/s12200-020-1009-z ↗
43. Xin C, Li Z, Hao L, Li Y (2023) A comprehensive review on additive manufacturing of glass: recent progress and future outlook. Mater Des 227:111736. https://doi.org/10.1016/j.matdes.2023.11173610.1016/j.matdes.2023.111736 ↗
44. Rapp B, Kotz-Helmer F (2024) Additive manufacturing of glass from science to applications, 1st edn, Elsevier, Amsterdam, Netherlands10.1016/B978-0-323-85488-7.00001-5 ↗
45. Kotz F, Arnold K, Bauer W et al. (2017) Three-dimensional printing of transparent fused silica glass. Nature 544:337–33910.1038/nature22061 ↗
46. Nguyen DT, Meyers C, Yee TD et al. (2017) 3D-printed transparent glass. Adv Mater 29:1701181. https://doi.org/10.1002/adma.20170118110.1002/adma.201701181 ↗
47. Dudukovic NA, Wong LL, Nguyen DT et al. (2018) Predicting nanoparticle suspension viscoelasticity for multimaterial 3D printing of silica-titania glass. ACS Appl Nano Mater 1:4038–4044. https://doi.org/10.1021/acsanm.8b0082110.1021/acsanm.8b00821 ↗
48. Liu C, Qian B, Ni R et al. (2018) 3D printing of multicolor luminescent glass. RSC Adv 8:31564–31567. https://doi.org/10.1039/C8RA06706F10.1039/C8RA06706F ↗
49. Zhang D, Xiao W, Liu C et al. (2020) Highly efficient phosphor-glass composites by pressureless sintering. Nat Commun 11:2805. https://doi.org/10.1038/s41467-020-16649-z10.1038/s41467-020-16649-z ↗
50. Duncan B, Beck D, Miller P et al. (2024) Low-temperature additive manufacturing of silica glass composites. ACS Mater Lett 6:720–728. https://doi.org/10.1021/acsmaterialslett.3c0151010.1021/acsmaterialslett.3c01510 ↗
51. Moore DG, Barbera L, Masania K, Studart AR (2020) Three-dimensional printing of multicomponent glasses using phase-separating resins. Nat Mater 19:212–217. https://doi.org/10.1038/s41563-019-0525-y10.1038/s41563-019-0525-y ↗
52. Wen X, Zhang B, Wang W et al. (2021) 3D-printed silica with nanoscale resolution. Nat Mater 20:1506–1511. https://doi.org/10.1038/s41563-021-01111-210.1038/s41563-021-01111-2 ↗
53. Bauer J, Crook C, Baldacchini T (2023) A sinterless, low-temperature route to 3D print nanoscale optical-grade glass. Science 380(1979):960–966. https://doi.org/10.1126/science.abq303710.1126/science.abq3037 ↗
54. Li M, Yue L, Rajan AC et al. (2023) Low-temperature 3D printing of transparent silica glass microstructures. Sci Adv 9:eadi2958. https://doi.org/10.1126/sciadv.adi295810.1126/sciadv.adi2958 ↗
55. Li B, Li Z, Cooperstein I et al. (2023) Additive manufacturing of transparent multi-component nanoporous glasses. Adv Sci 10:2305775. https://doi.org/10.1002/advs.20230577510.1002/advs.202305775 ↗
56. Barbera L, Korhonen H, Masania K, Studart AR (2024) Phase-separating resins for light-based three-dimensional printing of oxide glasses. Sci Rep 14:12323. https://doi.org/10.1038/s41598-024-63069-w10.1038/s41598-024-63069-w ↗
57. Fu Q, Saiz E, Rahaman MN, Tomsia AP (2011) Bioactive glass scaffolds for bone tissue engineering: state of the art and future perspectives. Mater Sci Eng C 31:1245–1256. https://doi.org/10.1016/j.msec.2011.04.02210.1016/j.msec.2011.04.022 ↗
58. Ting GHA, Tay YWD, Qian Y, Tan MJ (2019) Utilization of recycled glass for 3D concrete printing: rheological and mechanical properties. J Mater Cycles Waste Manag 21:994–1003. https://doi.org/10.1007/s10163-019-00857-x10.1007/s10163-019-00857-x ↗
59. Liu J, Li S, Gunasekara C et al. (2022) 3D-printed concrete with recycled glass: effect of glass gradation on flexural strength and microstructure. Constr Build Mater 314:125561. https://doi.org/10.1016/j.conbuildmat.2021.12556110.1016/j.conbuildmat.2021.125561 ↗
60. Innocenzi P (2023) Sol-gel processing for advanced ceramics, a perspective. Open Ceram 16:100477. https://doi.org/10.1016/j.oceram.2023.10047710.1016/j.oceram.2023.100477 ↗
61. Schottner G (2001) Hybrid sol−gel-derived polymers: applications of multifunctional materials. Chem Mater 13:3422–3435. https://doi.org/10.1021/cm011060m10.1021/cm011060m ↗
62. Tanaka K, Chujo Y (2012) Advanced functional materials based on polyhedral oligomeric silsesquioxane (POSS). J Mater Chem 22:1733–1746. https://doi.org/10.1039/C1JM14231C10.1039/C1JM14231C ↗
63. Shi H, Yang J, You M et al. (2020) Polyhedral oligomeric silsesquioxanes (POSS)-based hybrid soft gels: molecular design, material advantages, and emerging applications. ACS Mater Lett 2:296–316. https://doi.org/10.1021/acsmaterialslett.9b0049110.1021/acsmaterialslett.9b00491 ↗
64. Martin JE, Adolf D (1991) The sol-gel transition in chemical gels. Annu Rev Phys Chem 42:311–339. https://doi.org/10.1146/annurev.pc.42.100191.00152310.1146/annurev.pc.42.100191.001523 ↗
65. Innocenzi P (2020) Understanding sol–gel transition through a picture. A short tutorial. J Sol Gel Sci Technol 94:544–550. https://doi.org/10.1007/s10971-020-05243-w10.1007/s10971-020-05243-w ↗
66. Ilyin SO, Arinina MP, Malkin AYA, Kulichikhin VG (2016) Sol–gel transition and rheological properties of silica nanoparticle dispersions. Colloid J 78:608–615. https://doi.org/10.1134/S1061933X1605007010.1134/S1061933X16050070 ↗
67. Toprakcioglu Z, Knowles TPJ (2021) Shear-mediated sol-gel transition of regenerated silk allows the formation of Janus-like microgels. Sci Rep 11:6673. https://doi.org/10.1038/s41598-021-85199-110.1038/s41598-021-85199-1 ↗
68. Stober W, Fink A, Bohn AE (1968) Controlled growth of monodisperse silica spheres in the micron size range. J Colloid Interface Sci 26:62–69. https://doi.org/10.1016/0021-9797(68)90272-510.1016/0021-9797(68)90272-5 ↗
69. Bogush GH, Tracy MA, Zukoski CFI (1988) Preparation of monodisperse silica particles: control of size and mass fraction. J Non Cryst Solids 104:95–106. https://doi.org/10.1016/0022-3093(88)90187-110.1016/0022-3093(88)90187-1 ↗
70. Chen H-S, Kumar RV (2012) Sol–gel TiO2 in self-organization process: growth, ripening and sintering. RSC Adv 2:2294. https://doi.org/10.1039/c2ra00782g10.1039/c2ra00782g ↗
71. Atkinson A, Doorbar J, Hudd A et al. (1997) Continuous ink-jet printing using sol-gel “Ceramic” inks. J Sol Gel Sci Technol 8:1093–1097. https://doi.org/10.1007/BF0243698910.1007/BF02436989 ↗
72. Yoldas BE (1998) Design of sol-gel coating media for ink-jet printing. J Sol Gel Sci Technol 13:147–152. https://doi.org/10.1023/A:100864041394110.1023/A:1008640413941 ↗
73. Cho EJ, Bright FV (2002) Pin-printed chemical sensor arrays for simultaneous multianalyte quantification. Anal Chem 74:1462–1466. https://doi.org/10.1021/ac010907v10.1021/ac010907v ↗
74. Mougenot M, Lejeune M, Baumard JF et al. (2006) Ink jet printing of microdot arrays of mesostructured silica. J Am Ceram Soc 89:1876–1882. https://doi.org/10.1111/j.1551-2916.2006.01048.x10.1111/j.1551-2916.2006.01048.x ↗
75. Hossain SMZ, Luckham RE, Smith AM et al. (2009) Development of a bioactive paper sensor for detection of neurotoxins using piezoelectric inkjet printing of sol−gel-derived bioinks. Anal Chem 81:5474–5483. https://doi.org/10.1021/ac900660p10.1021/ac900660p ↗
76. Galliker P, Schneider J, Eghlidi H et al. (2012) Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets. Nat Commun 3:890. https://doi.org/10.1038/ncomms189110.1038/ncomms1891 ↗
77. Can TTT, Ko H-L, Choi W-S (2021) EHD-jet patterned MoS 2 on a high-k dielectric for high mobility in thin film transistor applications. Nanotechnology 32:245710. https://doi.org/10.1088/1361-6528/abed0510.1088/1361-6528/abed05 ↗
78. Shi S, Abbas Z, Zheng X et al. (2024) Direct writing of suspended nanowires using coaxial electrohydrodynamic jet with double tip assistance. J Sol Gel Sci Technol 111:202–215. https://doi.org/10.1007/s10971-024-06454-110.1007/s10971-024-06454-1 ↗
79. Lewis JA (2000) Colloidal processing of ceramics. J Am Ceram Soc 83:2341–2359. https://doi.org/10.1111/j.1151-2916.2000.tb01560.x10.1111/j.1151-2916.2000.tb01560.x ↗
80. Sigmund WM, Bell NS, Bergström L (2000) Novel powder-processing methods for advanced ceramics. J Am Ceram Soc 83:1557–1574. https://doi.org/10.1111/j.1151-2916.2000.tb01432.x10.1111/j.1151-2916.2000.tb01432.x ↗
81. Duoss EB, Twardowski M, Lewis JA (2007) Sol-gel inks for direct-write assembly of functional oxides. Adv Mater 19:3485–3489. https://doi.org/10.1002/adma.20070137210.1002/adma.200701372 ↗
82. Chiappone A, Fantino E, Roppolo I et al. (2016) 3D printed PEG-based hybrid nanocomposites obtained by sol-gel technique. ACS Appl Mater Interfaces 8:5627–5633. https://doi.org/10.1021/acsami.5b1257810.1021/acsami.5b12578 ↗
83. Zhu C, Han TYJ, Duoss EB et al. (2015) Highly compressible 3D periodic graphene aerogel microlattices. Nat Commun 6:6962. https://doi.org/10.1038/ncomms796210.1038/ncomms7962 ↗
84. Yang J, Wang H, Zhou B et al. (2021) Versatile direct writing of aerogel-based sol-gel inks. Langmuir 37:2129–2139. https://doi.org/10.1021/acs.langmuir.0c0331210.1021/acs.langmuir.0c03312 ↗
85. Zhao S, Siqueira G, Drdova S et al. (2020) Additive manufacturing of silica aerogels. Nature 584:387–392. https://doi.org/10.1038/s41586-020-2594-010.1038/s41586-020-2594-0 ↗
86. Long J, Chen X, Mao T et al. (2023) Laser direct writing of sol-gel-derived vacancy-rich functional oxide semiconductors. ACS Nano 17:10033–10040. https://doi.org/10.1021/acsnano.2c1216310.1021/acsnano.2c12163 ↗
87. Gluns J, Zhao L, Spiehl D, et al (2024) 3D printing of ordered mesoporous silica using light-induced sol-gel chemistry. Adv Funct Mater 2405511. https://doi.org/10.1002/adfm.20240551110.1002/adfm.202405511 ↗
88. Torres Arango MA, Zhang Y, Li R et al. (2020) In-operando study of shape retention and microstructure development in a hydrolyzing sol-gel ink during 3D-printing. ACS Appl Mater Interfaces 12:51044–51056. https://doi.org/10.1021/acsami.0c1474310.1021/acsami.0c14743 ↗
89. Gailevičius D, Padolskytė V, Mikoliūnaitė L et al. (2019) Additive-manufacturing of 3D glass-ceramics down to nanoscale resolution. Nanoscale Horiz 4:647–651. https://doi.org/10.1039/C8NH00293B10.1039/C8NH00293B ↗
90. Guo Z, Zhou C (2021) Recent advances in ink-based additive manufacturing for porous structures. Addit Manuf 48:102405
91. Chandrasekaran S, Lin D, Li Y, Worsley MA (2023) Aerogels, additive manufacturing, and energy storage. Joule 7:866–883. https://doi.org/10.1016/j.joule.2023.03.02110.1016/j.joule.2023.03.021 ↗
92. Deshmukh K, Kovářík T, Křenek T et al. (2020) Recent advances and future perspectives of sol–gel derived porous bioactive glasses: a review. RSC Adv 10:33782–33835. https://doi.org/10.1039/D0RA04287K10.1039/D0RA04287K ↗
93. Baccile N, Babonneau F, Thomas B, Coradin T (2009) Introducing ecodesign in silica sol–gel materials. J Mater Chem 19:8537. https://doi.org/10.1039/b911123a10.1039/b911123a ↗
94. Piatti E, Miola M, Verné E (2024) Tailoring of bioactive glass and glass-ceramics properties for in vitro and in vivo response optimization: a review. Biomater Sci 12:4546–4589. https://doi.org/10.1039/D3BM01574B10.1039/D3BM01574B ↗
95. Hench LL (2006) The story of Bioglass®. J Mater Sci Mater Med 17:967–978. https://doi.org/10.1007/s10856-006-0432-z10.1007/s10856-006-0432-z ↗
96. Gmeiner R, Deisinger U, Schönherr J et al. (2015) Additive manufacturing of bioactive glasses and silicate bioceramics. J Ceram Sci Technol 6:75–86. https://doi.org/10.4416/JCST2015-0000110.4416/JCST2015-00001 ↗
97. García A, Izquierdo-Barba I, Colilla M et al. (2011) Preparation of 3-D scaffolds in the SiO2–P2O5 system with tailored hierarchical meso-macroporosity. Acta Biomater 7:1265–1273. https://doi.org/10.1016/j.actbio.2010.10.00610.1016/j.actbio.2010.10.006 ↗
98. Luo G, Ma Y, Cui X et al. (2017) 13-93 bioactive glass/alginate composite scaffolds 3D printed under mild conditions for bone regeneration. RSC Adv 7:11880–11889. https://doi.org/10.1039/C6RA27669E10.1039/C6RA27669E ↗
99. Motealleh A, Eqtesadi S, Pajares A et al. (2017) Case study: Reinforcement of 45S5 bioglass robocast scaffolds by HA/PCL nanocomposite coatings. J Mech Behav Biomed Mater 75:114–118. https://doi.org/10.1016/j.jmbbm.2017.07.01210.1016/j.jmbbm.2017.07.012 ↗
100. Baino F, Fiume E (2020) 3D printing of hierarchical scaffolds based on mesoporous bioactive glasses (MBGs)—fundamentals and applications. Materials 13:1688. https://doi.org/10.3390/ma1307168810.3390/ma13071688 ↗