journal article·2023-02Open access

Rapid synthesis of MCM-41 and SBA-15 by microwave irradiation: promising adsorbents for CO2 adsorption

Marília R. Oliveira, Juan A. Cecilia, Juliana F. De Conto, Silvia M. Egues, Enrique Rodríguez-Castellón

Abstract

Abstract It is known that the world scenario is one of constant search for sustainable technologies that can reduce the emission of carbon dioxide (CO2) in the atmosphere. This is because CO2 is seen as the main responsible for the increase in the generation of greenhouse gases, which leads to global warming and climate change. The development of efficient adsorbents for CO2 capture is a current challenge. MCM-41 and SBA-15 were synthesized in a microwave reactor and used as adsorbents in this work. Microwave irradiation presents itself as an easy synthesis strategy with less preparation time and energy requirement. The silica synthesis period was extremely reduced (1 h) at a temperature of 60 and 80 °C in the microwave reactor, obtaining silica with good textural and chemical properties. The CO2 adsorption isotherms were performed at 0, 25, and 40 °C at 1 bar. The MCM-41 and SBA-15 present favorable results for CO2 capture processes, showing that pure silica synthesized by microwave already obtains promising results, reaching a maximum adsorption capacity of 2.16 mmol g−1 (1 bar—0 °C) and a good fit for the Langmuir, DsL and Toth models. Furthermore, to increase CO2 adsorption, the mesoporous silica was also modified via impregnation with branched polyethylene diamine (PEI) or tetraethylenepentamine (TEPA). It is worth mentioning that microwave irradiation reduced the synthesis steps and improved the properties and adsorption capacity of the silica. This work opens new opportunities in the efficient preparation of materials that require optimizing the adsorbent synthesis process. Graphical Abstract
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Carbon Dioxide Capture Technologies · Membrane Separation and Gas Transport · Zeolite Catalysis and Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Oliveira RJ, Oliveira MR, De Conto JF, Borges GR, Dariva C, Egues SM, Franceschi E (2019) CO2/CH4 adsorption at high-pressure using silica-APTES aerogel as adsorbent and near infrared as a monitoring technique. J CO2 Util 32:232–240. https://doi.org/10.1016/j.jcou.2019.04.01910.1016/j.jcou.2019.04.019 ↗
2. Barbosa MN, Costa MJF, Barbosa MN, Fernandes Júnior VJ, Salazar-Banda GR, Reyes-Carmona Á, Rodríguez-Castellón E, Araujo AS (2021) Aminopropyltriethoxysilane functionalized MCM-41 and SBA-15 nanostructured materials for carbon dioxide adsorption. Rev Mat. https://doi.org/10.1590/S1517-707620210004.138510.1590/S1517-707620210004.1385 ↗
3. Watabe T, Yogo K (2013) Isotherms and isosteric heats of adsorption for CO2 in amine-functionalized mesoporous silicas. Sep Purif Technol. https://doi.org/10.1016/j.seppur.2013.09.01110.1016/j.seppur.2013.09.011 ↗
4. Zhang G, Zhao P, Hao L, Xu Y (2018) Amine-modified SBA-15(P): a promising adsorbent for CO2 capture. J CO2 Util. https://doi.org/10.1016/j.jcou.2017.12.00610.1016/j.jcou.2017.12.006 ↗
5. Santos KMC, Menezes TR, Oliveira MR, Silva TSL, Santos KS, Barros VA, Melo DC, Ramos AL, Santana CC, Franceschi E, Dariva C, Egues SM, Borges GR, De Conto JF (2021) Natural gas dehydration by adsorption using MOFs and silicas: a review. Sep Purif Technol. https://doi.org/10.1016/j.seppur.2021.11940910.1016/j.seppur.2021.119409 ↗
6. Nascimento RF, Lima ACA, Vidal CB, Melo DQ, Raulino GSC (2014) Adsorção: Aspectos teóricos e aplicações ambientais. Fortaleza-CE, Brasil
7. Muchan P, Saiwan C, Nithitanakul M (2020) Investigation of adsorption/desorption performance by aminopropyltriethoxysilane grafted onto different mesoporous silica for post-combustion CO2 capture. Clean Energy 4:120–131. https://doi.org/10.1093/ce/zkaa00310.1093/ce/zkaa003 ↗
8. Regufe MJ, Ferreira AFP, Loureiro JM, Rodrigues A, Ribeiro AM (2019) Electrical conductive 3D-printed monolith adsorbent for CO2 capture. Micropor Mesopor Mat. https://doi.org/10.1016/j.micromeso.2019.01.00910.1016/j.micromeso.2019.01.009 ↗
9. Vilarrasa-García E, Cecilia JA, Moura PAS, Azevedo DCS, Rodríguez-Castellon E (2020) Assessing CO2 adsorption on amino-functionalized mesocellular foams synthesized at different aging temperatures. Front Chem. https://doi.org/10.3389/fchem.2020.59176610.3389/fchem.2020.591766 ↗
10. Hughes R, Kotamreddy G, Ostace A, Bhattacharyya D, Siegelman RL, Parker ST, Didas SA, Long JR, Omell B, Matuszewski M (2021) Isotherm, kinetic, process modeling, and techno-economic analysis of a diamine-appended metal−organic framework for CO2 capture using fixed bed contactors. Energy Fuels 35:6040–6055. https://doi.org/10.1021/acs.energyfuels.0c0435910.1021/acs.energyfuels.0c04359 ↗
11. Beck JS, Vartuli JC, Roth WJ, Leonowicz ME, Kresge CT, Schmitt KD, Chu CTW, Olson DH, Sheppard EW, Mccullen SB, Higgins JB, Schlenkert JL (1992) A new family of mesoporous molecular sieves prepared with liquid crystal templates. J Am Chem Soc 114:10834–10843. https://doi.org/10.1021/ja00053a02010.1021/ja00053a020 ↗
12. Zhao DY, Feng JL, Huo QS, Melosh N, Fredrickson GH, Chmelka BF, Stucky GD (1998) Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores. Science 279:548–52. https://doi.org/10.1126/science.279.5350.54810.1126/science.279.5350.548 ↗
13. Cecilia JA, Vilarrasa-García E, García-Sancho C, Saboya RMA, Azevedo DCS, Cavalcante Jr CL, Rodríguez-Castellón E (2016) Functionalization of hollow silica microspheres by impregnation or grafted of amine groups for the CO2 capture. Int J Greenh Gas Control 52:344–356. https://doi.org/10.1016/j.ijggc.2016.07.01810.1016/j.ijggc.2016.07.018 ↗
14. Tan X, Huang Z, Jiang L, Xiao T, Wang Y, Yang X, Zhu H, Li S, Chen X (2021) A simple fabrication of superhydrophobic PVDF/SiO2 coatings and their anti‑icing properties. J Mater Res 36:637–645. https://doi.org/10.1557/s43578-020-00034-z10.1557/s43578-020-00034-z ↗
15. Oliveira MR, Oliveira MM, Oliveira RJ, Dervanoski A, Franceschi E, Egues SM, De Conto JF (2019) Amine-modified silica surface applied as adsorbent in the phenol adsorption assisted by ultrasound. Chem Eng Commun 206:1554–1569. https://doi.org/10.1080/00986445.2019.161546710.1080/00986445.2019.1615467 ↗
16. Oliveira MR, Deon M, Benvenutti EV, Barros VA, Melo DC, Franceschi E, Egues SM, De Conto JF (2020) Effect of microwave irradiation on the structural, chemical, and hydrophilicity characteristics of ordered mesoporous silica SBA-15. J Sol-Gel Sci Technol 94:708–718. https://doi.org/10.1007/s10971-020-05219-w10.1007/s10971-020-05219-w ↗
17. Furukawa H, Gandara F, Zhang YB, Jiang J, Queen WL, Hudson MR, Yaghi OM (2014) Water adsorption in porous metal−organic frameworks and related materials. J Am Chem Soc 136:4369–81. https://doi.org/10.1021/ja500330a10.1021/ja500330a ↗
18. Mayanovic RA, Yan H, Brandt AD, Wang Z, Mandal M, Landskron K, Bassett WA (2014) Mechanical and hydrothermal stability of mesoporous materials at extreme conditions. Micropor Mesopor Mater 195:161–166. https://doi.org/10.1016/j.micromeso.2014.04.02710.1016/j.micromeso.2014.04.027 ↗
19. De Conto JF, Oliveira M, Oliveira RJ, Campos KV, De Menezes EW, Benvenutti EV, Franceschi E, Santana CC, Egues SM (2017) Synthesis of silica modified with 1-methylimidazolium chloride by sol-gel method: a comparison between microwave radiation-assisted and conventional methods. J Non-Cryst Solids 471:209–214. https://doi.org/10.1016/j.jnoncrysol.2017.05.04110.1016/j.jnoncrysol.2017.05.041 ↗
20. Peres EC, Slaviero JC, Cunha AM, Hosseini–Bandegharaei A, Dotto GLJ (2018) Microwave synthesis of silica nanoparticles and its application for methylene blue adsorption. Environ Chem Eng 6:649–659. https://doi.org/10.1016/j.jece.2017.12.06210.1016/j.jece.2017.12.062 ↗
21. Bordoni AV, Lombardo MV, Wolosiuk A (2021) Rapid pore expansion of mesoporous silica-based materials using microwave irradiation and pore swelling agents. Mater Chem Phys 274:125185. https://doi.org/10.1016/j.matchemphys.2021.12518510.1016/j.matchemphys.2021.125185 ↗
22. You H-S, Jin H, Mo Y-H, Park S-E (2013) CO2 adsorption behavior of microwave synthesized zeolite beta. Mater Lett 108:106–109. https://doi.org/10.1016/j.matlet.2013.06.08810.1016/j.matlet.2013.06.088 ↗
23. Rueda M, Sanz-Moral LM, Nieto-Márquez A, Longone P, Mattea F, Martín A (2014) Production of silica aerogel microparticles loaded with ammonia borane by batch and semicontinuous supercritical drying techniques. J Supercrit Fluid 92:299–310. https://doi.org/10.1016/j.supflu.2014.06.01210.1016/j.supflu.2014.06.012 ↗
24. Greñu BD, De los Reyes R, Costero AM, Amorós P, Ros-Lis JV (2020) Recent progress of microwave-assisted synthesis of silica materials. Nanomaterials 10. https://doi.org/10.3390/nano1006109210.3390/nano10061092 ↗
25. Grun M, Unger KK, Matsumoto A, Tsutsumi K (1999) Novel pathways for the preparation of mesoporous MCM-41 materials: control of porosity and morphology. Micropor Mesopor Mat 27:207–216. https://doi.org/10.1016/S1387-1811(98)00255-810.1016/S1387-1811(98)00255-8 ↗
26. Xu X, Song C, Andrésen JM, Miller BG, Scaroni AW (2003) Preparation and characterization of novel CO2 “molecular basket” adsorbents based on polymer-modified mesoporous molecular sieve MCM-41. Micropor Mesopor Mater 62:29–45. https://doi.org/10.1016/S1387-1811(03)00388-310.1016/S1387-1811(03)00388-3 ↗
27. Cecilia JA, Vilarrasa‑García E, Morales‑Ospino R, Bastos‑Neto M, Azevedo DCS, Rodríguez‑Castellón E (2020) Insights into CO2 adsorption in amino‑functionalized SBA‑15 synthesized at different aging temperature. Adsorption 26:225–240. https://doi.org/10.1007/s10450-019-00118-110.1007/s10450-019-00118-1 ↗
28. Do DD (1998) Adsorption analysis: equilibria and kinetics. Imperial College Press, London10.1142/p111 ↗
29. Thommes M, Kaneko K, Neimark AV, Olivier JP, Rodriguez-Reinoso F, Rouquerol J, Sing KSW (2015) Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC Technical Report). Pure Appl Chem 87:1051–1069. https://doi.org/10.1515/pac-2014-111710.1515/pac-2014-1117 ↗
30. Santos BF, Cecilia JA, Bastos-Neto M, Rodríguez-Castellón E, Azevedo DCS, Vilarrasa-García E (2022) Insights into optimized synthesis conditions of hollow microspheres of silica for water vapor adsorption. Chem Eng Res Des 177:583–593. https://doi.org/10.1016/j.cherd.2021.11.02010.1016/j.cherd.2021.11.020 ↗
31. Galarneau A, Cambon H, Di Renzo F, Fajula F (2001) True microporosity and surface area of mesoporous SBA-15 silicas as a function of synthesis temperature. Langmuir 17:8328–8335. https://doi.org/10.1021/la010547710.1021/la0105477 ↗
32. Rao N, Wang M, Shang Z, Hou Y, Fan G, Li J (2018) CO2 adsorption by amine-functionalized MCM-41: a comparison between impregnation and grafting modification methods. Energy Fuels 32:670–677. https://doi.org/10.1021/acs.energyfuels.7b0290610.1021/acs.energyfuels.7b02906 ↗
33. Yamashita T, Hayes P (2008) Analysis of XPS spectra of Fe2+ and Fe3+ ions oxide. Appl Surf Sci 254:2441–2449. https://doi.org/10.1016/j.apsusc.2007.09.06310.1016/j.apsusc.2007.09.063 ↗
34. Sales RV, Moura HOMA, Câmara ABF, Rodríguez-Castellón E, Silva JAB, Pergher SBC, Campos LMA, Urbina MM, Bicudo TC, Carvalho LS (2019) Assessment of Ag nanoparticles interaction over low-cost mesoporous silica in deep desulfurization of diesel. Catalysts 9:651. https://doi.org/10.3390/catal908065110.3390/catal9080651 ↗
35. Ojeda-López R, Domínguez-Ortiz A, Felipe C, Cervantes-Uribe A, Pérez-Hermosillo IJ, Esparza-Schulz JM (2021) Adsorption on micro-mesoporous materials: carbon microfibers (CMFs), SBA-15, and amine-functionalized SBA-15. J Compos Sci 5:102. https://doi.org/10.3390/jcs504010210.3390/jcs5040102 ↗
36. Chaignon J, Bouizi Y, Davin L, Calin N, Albela B, Bonneviot L (2015) Minute-made and low carbon fingerprint microwave synthesis of high quality templated mesoporous silica. Green Chem 17:3130–3140. https://doi.org/10.1039/C5GC00038F10.1039/C5GC00038F ↗
37. Sanz-Pérez ES, Arencibia A, Sanz R, Calleja G (2016) New developments on carbon dioxide capture using amine-impregnated silicas. Adsorption 22:609–619. https://doi.org/10.1007/s10450-015-9740-210.1007/s10450-015-9740-2 ↗
38. Samanta A, Zhao A, Shimizu GKH, Sarkar P, Gupta R (2012) Post-combustion CO2 capture using solid sorbents: a review. Ind Eng Chem Res 51:1438–1463. https://doi.org/10.1021/ie200686q10.1021/ie200686q ↗
39. Candamano S, Policicchio A, Conte G, Abarca R, Algieri C, Chakraborty S, Curcio S, Calabró V, Crea F, Agostino RG (2022) Preparation of foamed and unfoamed geopolymer/NaX zeolite/activated carbon composites for CO2 adsorption. J Clean Prod 330:129843. https://doi.org/10.1016/j.jclepro.2021.12984310.1016/j.jclepro.2021.129843 ↗
40. Kumar A, Rout S, Ghosh M, Singhal RK, Rav PM (2013) Thermodynamic parameters of U (VI) sorption onto soils in aquatic systems. Springerplus 2:530. https://doi.org/10.1186/2193-1801-2-53010.1186/2193-1801-2-530 ↗
41. Humelnicu D, Zinicovscaia I, Humelnicu I, Ignat M, Yushin N, Grozdov D (2022) Study on the SBA-15 silica and ETS-10 titanosilicate as efficient adsorbents for Cu (II) removal from aqueous solution. Water 14:857. https://doi.org/10.3390/w1406085710.3390/w14060857 ↗
42. Ma J, Liu Q, Chen D, Wen S, Wang T (2014) CO2 adsorption on amine-modified mesoporous silicas. J Porous Mat 21:859–867. https://doi.org/10.1007/s10934-014-9835-210.1007/s10934-014-9835-2 ↗
43. Yang G, Deng Y, Ding H, Lin Z, Shao Y, Wang Y (2015) A facile approach to synthesize MCM-41 mesoporous materials from iron ore tailing: Influence of the synthesis conditions on the structural properties. Appl Clay Sci 111:61–66. https://doi.org/10.1016/j.clay.2015.04.00510.1016/j.clay.2015.04.005 ↗
44. Drage TC, Arenillas A, Smith KM, Snape CE (2008) Thermal stability of polyethylenimine based carbon dioxide adsorbents and its influence on selection of regeneration strategies. Micro Mesop Mater 116:504–512. https://doi.org/10.1016/j.micromeso.2008.05.00910.1016/j.micromeso.2008.05.009 ↗
45. Sanz-Peŕez ES, Olivares-Marín M, Arencibia A, Sanz R, Calleja G, Maroto-Valer MM (2013) CO2 adsorption performance of amino-functionalized SBA-15 under post-combustion conditions. Int J Greenh Gas Control 17:366–375. https://doi.org/10.1016/j.ijggc.2013.05.01110.1016/j.ijggc.2013.05.011 ↗
46. Sánchez-Vicente Y, Stevens LA, Pando C, Torralvo MJ, Snape CE, Drage TC, Cabañas A (2015) A new sustainable route in supercritical CO2 to functionalize silica SBA-15 with 3-aminopropyltrimethoxysilane as material for carbon capture. Chem Eng J 264:886–898. https://doi.org/10.1016/j.cej.2014.12.00210.1016/j.cej.2014.12.002 ↗
47. Vilarrasa-García E, Cecilia JA, Moya EMO, Cavalcante Jr CL, Azevedo DCS, Rodríguez-Castellón E (2015) “Low Cost” pore expanded SBA-15 functionalized with amine groups applied to CO2 adsorption. Materials 8:2495–2513. https://doi.org/10.3390/ma805249510.3390/ma8052495 ↗
48. De Sousa JAR, Amâncio R, Morales-Ospino R, De Oliveira JLB, Cecilia JÁ, Vilarrasa-García E, Bastos-Neto M, Rodríguez-Castellón E, De Azevedo DCS (2021) H2S and H2O combined effect on CO2 capture by amino functionalized hollow microsphere silicas. Ind Eng Chem Res 60:10139–10154. https://doi.org/10.1021/acs.iecr.1c0003310.1021/acs.iecr.1c00033 ↗
49. Liu Y, Tan X, Li X, Xiao T, Jiang L, Nie S, Song J, Chen X (2022) Eco-friendly fabrication of transparent superhydrophobic coating with excellent mechanical robustness, chemical stability, and long-term outdoor durability. Langmuir 38:12881–12893. https://doi.org/10.1021/acs.langmuir.2c0199810.1021/acs.langmuir.2c01998 ↗
50. Tan X, Wang Y, Huang Z, Sabin S, Xiao T, Jiang L, Chen X (2021) Facile fabrication of a mechanical, chemical, thermal, and long-term outdoor durable fluorine-free superhydrophobic coating. Adv Mater Interfaces. https://doi.org/10.1002/admi.20200220910.1002/admi.202002209 ↗
51. Tumurbaatar O, Lazarova H, Popova M, Mitova V, Shestakova P (2022) CO2 adsorption on the N- and P-modified mesoporous silicas. Nanomaterials 12. https://doi.org/10.3390/nano1207122410.3390/nano12071224 ↗
52. Yan X, Komarneni S, Yan Z (2013) CO2 adsorption on Santa Barbara Amorphous-15 (SBA-15) and amine-modified Santa Barbara Amorphous-15 (SBA-15) with and without controlled microporosity. J Colloid Interface Sci 390:217–24. https://doi.org/10.1016/j.jcis.2012.09.03810.1016/j.jcis.2012.09.038 ↗
53. Munguía-Cortés L, Pérez-Hermosillo I, Ojeda-López R, Esparza-Schulz JM, Felipe-Mendoza C, Cervantes-Uribe A, Domínguez-Ortiz A (2017) APTES-functionalization of SBA-15 using ethanol or toluene: textural, characterization and sorption performance of carbon dioxide. J Mexican Chem Soc 61. https://doi.org/10.29356/jmcs.v61i4.45710.29356/jmcs.v61i4.457 ↗
54. Le MUT, Seul-Yi L, Park S-J (2014) Preparation and characterization of PEI-loaded MCM-41 for CO2 capture. Int J Hydrog Energy 39:12340–12346. https://doi.org/10.1016/j.ijhydene.2014.04.11210.1016/j.ijhydene.2014.04.112 ↗