journal article·2015-04

Preparation of mechanically strong and lightweight cellulose aerogels from cellulose-NaOH/PEG solution

Caichao Wan, Yun Lu, Yue Jiao, Jun Cao, Qingfeng Sun, Jian Li

Publisher page

Abstract

Novel mechanically strong and lightweight cellulose aerogels were successfully prepared by the procedures in four steps: (1) dissolving bamboo fiber in a mild NaOH/PEG solution; (2) freeze–thaw treatment; (3) regeneration; (4) freeze drying. The aerogels with dense interconnected and hierarchical pore structures had high specific surface area of 204 m2 g−1, large pore volume of 0.99 cm3 g−1, high porosity as high as 97 % and low density of 0.054 g cm−3, and showed cellulose II crystal structure. Moreover, the aerogels exhibited strong resistance to compression load with high Young’ modulus of 1.85 MPa, yield stress of 83.57 kPa, and toughness of 52.34 kJ m−3.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aerogels and thermal insulation · Advanced Cellulose Research Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Hrubesh LW (1998) Aerogel applications. J Non Cryst Solids 225:335–34210.1016/S0022-3093(98)00135-5 ↗
2. Wei T-Y, Lu S-Y, Chang Y-C (2008) Transparent, hydrophobic composite aerogels with high mechanical strength and low high-temperature thermal conductivities. J Phys Chem B 112:11881–1188610.1021/jp804855v ↗
3. Cai J, Liu S, Feng J, Kimura S, Wada M, Kuga S et al (2012) Cellulose–silica nanocomposite aerogels by in situ formation of silica in cellulose gel. Angew Chem Int Ed 124:2118–212110.1002/ange.201105730 ↗
4. Chin SF, Binti Romainor AN, Pang SC (2014) Fabrication of hydrophobic and magnetic cellulose aerogel with high oil absorption capacity. Mater Lett 115:241–24310.1016/j.matlet.2013.10.061 ↗
5. Fischer F, Rigacci A, Pirard R, Berthon-Fabry S, Achard P (2006) Cellulose-based aerogels. Polymer 47:7636–764510.1016/j.polymer.2006.09.004 ↗
6. Olsson RT, Samir MA, Salazar-Alvarez G, Belova L, Ström V, Berglund LA et al (2010) Making flexible magnetic aerogels and stiff magnetic nanopaper using cellulose nanofibrils as templates. Nat Nanotechnol 5:584–58810.1038/nnano.2010.155 ↗
7. Pääkkö M, Vapaavuori J, Silvennoinen R, Kosonen H, Ankerfors M, Lindström T et al (2008) Long and entangled native cellulose I nanofibers allow flexible aerogels and hierarchically porous templates for functionalities. Soft Matter 4:2492–249910.1039/b810371b ↗
8. Liu S, Yan Q, Tao D, Yu T, Liu X (2012) Highly flexible magnetic composite aerogels prepared by using cellulose nanofibril networks as templates. Carbohydr Polym 89:551–55710.1016/j.carbpol.2012.03.046 ↗
9. Zhang J, Cao Y, Feng J, Wu P (2012) Graphene-oxide-sheet-induced gelation of cellulose and promoted mechanical properties of composite aerogels. J Phys Chem C 116:8063–806810.1021/jp2109237 ↗
10. Gawryla MD, van den Berg O, Weder C, Schiraldi DA (2009) Clay aerogel/cellulose whisker nanocomposites: a nanoscale wattle and daub. J Mater Chem 19:2118–212410.1039/b823218k ↗
11. Sehaqui H, Zhou Q, Berglund LA (2011) High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC). Compos Sci Technol 71:1593–159910.1016/j.compscitech.2011.07.003 ↗
12. Deng M, Zhou Q, Du A, van Kasteren J, Wang Y (2009) Preparation of nanoporous cellulose foams from cellulose-ionic liquid solutions. Mater Lett 63:1851–185410.1016/j.matlet.2009.05.064 ↗
13. Tsioptsias C, Stefopoulos A, Kokkinomalis I, Papadopoulou L, Panayiotou C (2008) Development of micro-and nano-porous composite materials by processing cellulose with ionic liquids and supercritical CO2. Green Chem 10:965–97110.1039/b803869d ↗
14. Oh SY, Yoo DI, Shin Y, Kim HC, Kim HY, Chung YS et al (2005) Crystalline structure analysis of cellulose treated with sodium hydroxide and carbon dioxide by means of X-ray diffraction and FTIR spectroscopy. Carbohydr Res 340:2376–239110.1016/j.carres.2005.08.007 ↗
15. Sehaqui H, Salajková M, Zhou Q, Berglund LA (2010) Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions. Soft Matter 6:1824–183210.1039/b927505c ↗