Synthesis and characterization of non-transformable tetragonal YSZ nanopowder by means of Pechini method for thermal barrier coatings (TBCs) applications
Source abstract
Abstract
A simple soft chemical method of synthesizing tetragonal yttria stabilized zirconia nanopowders is described here. Zirconium oxy-chloride octahydrate and yttrium nitrate hexahydrate were taken as a source of zirconium, citric acid was taken as a chelating agent, and ethylene glycol was used as a polysterification agent. The synthesized powders were characterized by X-ray diffraction, thermogravimetric analysis and differential scanning calorimetry, transmission electron microscopy, field emission scanning electron microscope, Fourier transform infrared spectroscopy and Raman spectroscopy. Furthermore, precise cell parameters were calculated in order to exactly determine non-transformable tetragonal crystal structure, which was the best zirconia phase for thermal barrier coatings applications. In this process, tetragonal yttria stabilized zirconia nanopowders could be prepared at a temperature of 1,000 °C and the process was simple and cost-effective.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advancements in Solid Oxide Fuel Cells · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Kumari L, Li W, Xu J, Leblanc R, Wang D, Li Y, Guo H, Zhang J (2009) Controlled hydrothermal synthesis of zirconium oxide nanostructures and their optical properties. Cryst Growth Des 9(9):3874–388010.1021/cg800711m ↗
2. Liu H, Jazi H, Bussmann M, Mostaghimi J (2009) Experiments and modeling of rapid solidification of plasma-sprayed yttria-stabilized zirconia. Acta Mater 57(20):6013–602110.1016/j.actamat.2009.08.023 ↗
3. Li P, Chen IW, Penner-Hahn JE (1994) Effect of dopants on zirconia stabilization—an X-ray absorption study: I, trivalent dopants. J Am Ceram Soc 77(1):118–12810.1111/j.1151-2916.1994.tb06964.x ↗
4. Li P, Chen IW, Penner-Hahn JE (1994) Effect of dopants on zirconia stabilization—an X-ray absorption study: II, tetravalent dopants. J Am Ceram Soc 77(5):1281–128810.1111/j.1151-2916.1994.tb05403.x ↗
5. Li P, Chen IW, Penner-Hahn JE (1994) Effect of dopants on zirconia stabilization—an X-ray absorption study: III, charge-compensating dopants. J Am Ceram Soc 77(5):1289–129510.1111/j.1151-2916.1994.tb05404.x ↗
6. Viazzi C, Bonino J-P, Ansart F, Barnabé A (2008) Structural study of metastable tetragonal YSZ powders produced via a sol–gel route. J Alloys Compd 452(2):377–38310.1016/j.jallcom.2006.10.155 ↗
7. Miller RA, Smialek JL, Garlick RG (1981) Phase stability in plasma-sprayed, partially stabilized zirconia-yttria
8. Comelli RA, Vera CR, Parera JM (1995) Influence of ZrO2 crystalline structure and sulfate ion concentration on the catalytic activity of So2 − 4-ZrO2. J Catal 151(1):96–10110.1006/jcat.1995.1012 ↗
9. Shukla S, Seal S (2005) Mechanisms of room temperature metastable tetragonal phase stabilisation in zirconia. Int Mater Rev 50(1):45–6410.1179/174328005X14267 ↗
10. Štefanić G, Musić S, Gržeta B, Popović S, Sekulić A (1998) Influence of pH on the stability of low temperature t-ZrO2. J Phys Chem Solids 59(6):879–88510.1016/S0022-3697(98)00028-6 ↗
11. Pacheco G, Fripiat J (2000) Physical chemistry of the thermal transformation of mesoporous and microporous zirconia. J Phys Chem B 104(50):11906–1191110.1021/jp001455d ↗
12. Nettleship I, Stevens R (1987) Tetragonal zirconia polycrystal (TZP)—a review. Int J High Technol Ceram 3(1):1–3210.1016/0267-3762(87)90060-9 ↗
13. Subbarao E (1981) Ceramic dielectrics for capacitors. Ferroelectrics 35(1):143–14810.1080/00150198108017677 ↗
14. Scott H (1975) Phase relationships in the zirconia-yttria system. J Mater Sci 10(9):1527–153510.1007/BF01031853 ↗
15. Mevrel R, Rio C, Poulain M, Diot C, Nardou F (1987) Technical Report No. 28/2019M. ONERA
16. Miller RA (1997) Thermal barrier coatings for aircraft engines: history and directions. J Therm Spray Technol 6(1):35–4210.1007/BF02646310 ↗
17. Bose S (2011) High temperature coatings. Butterworth-Heinemann, UK
18. Srinivasan R, De Angelis RJ, Ice G, Davis BH (1991) Identification of tetragonal and cubic structures of zirconia using synchrotron x-radiation source. J Mater Res 6(6):1287–129210.1557/JMR.1991.1287 ↗
19. Kontoyannis CG, Carountzos G (1994) Quantitative determination of the cubic-to-monoclinic phase transformation in fully stabilized Zirconias by Raman spectroscopy. J Am Ceram Soc 77(8):2191–219410.1111/j.1151-2916.1994.tb07117.x ↗
20. Pechini M (1967) Patent No. 3,330,697. United States Patent Office
21. Cullity BD, Stock SR (2001) Elements of X-ray diffraction, vol 3. Prentice Hall Upper Saddle River, NJ
22. Suryanarayana C, Norton MG (1998) X-ray diffraction: a practical approach. Springer, Berlin10.1007/978-1-4899-0148-4 ↗
23. da Silva RS, Bernardi MIB, Hernandes AC (2007) Synthesis of non-agglomerated Ba0. 77Ca0. 23TiO3 nanopowders by a modified polymeric precursor method. J Sol-Gel Sci Technol 42(2):173–17910.1007/s10971-007-1554-6 ↗
24. Singh K, Pathak L, Roy S (2007) Effect of citric acid on the synthesis of nano-crystalline yttria stabilized zirconia powders by nitrate–citrate process. Ceram Int 33(8):1463–146810.1016/j.ceramint.2006.05.021 ↗
25. Sakka S (2005) Handbook of sol-gel science and technology. 1. Sol-gel processing, vol 1. Springer
26. Kakihana M, Yoshimura M (1999) Synthesis and characteristics of complex multicomponent oxides prepared by polymer complex method. Bull Chem Soc Jpn 72(7):1427–144310.1246/bcsj.72.1427 ↗
27. Xu Y, Yuan X, Huang G, Long H (2005) Polymeric precursor synthesis of Ba2Ti9O20. Mater Chem Phys 90(2):333–33810.1016/j.matchemphys.2004.10.022 ↗
28. Socrates G, Socrates G (2001) Infrared and Raman characteristic group frequencies: tables and charts. Wiley, Chichester
29. Zhang Y, Li A, Yan Z, Xu G, Liao C, Yan C (2003) (ZrO2) 0.85 (REO1. 5) 0.15 (Re. J Solid State Chem 171(1–2):434–43810.1016/S0022-4596(02)00227-X ↗
30. Laberty-Robert C, Ansart F, Deloget C, Gaudon M, Rousset A (2001) Powder synthesis of nanocrystalline ZrO2–8% Y2O3 via a polymerization route. Mater Res Bull 36(12):2083–210110.1016/S0025-5408(01)00723-1 ↗
31. Zhang Y-W, Yan Z-G, Liao F-H, Liao C-S, Yan C-H (2004) Citrate gel synthesis and characterization of (ZrO2)0.85 (REO1.5) 0.15 (RE = Y, Sc) solid solutions. Mater Res Bull 39(11):1763–177710.1016/j.materresbull.2003.12.019 ↗
32. Thackeray D (1974) The Raman spectrum of zirconium dioxide. Spectrochimica Acta Part A Mol Spectrosc 30(2):549–55010.1016/0584-8539(74)80096-6 ↗
33. Li C, Li M (2002) UV Raman spectroscopic study on the phase transformation of ZrO2, Y2O3–ZrO2 and SO42−/ZrO2. J Raman Spectrosc 33(5):301–30810.1002/jrs.863 ↗
34. Naumenko A, Berezovska N, Biliy M, Shevchenko O (2008) Vibrational analysis and Raman spectra of tetragonal Zirconia. Phys Chem Solid State 9(1):121–125
35. Gazzoli D, Mattei G, Valigi M (2007) Raman and X-ray investigations of the incorporation of Ca2+ and Cd2+ in the ZrO2 structure. J Raman Spectrosc 38(7):824–83110.1002/jrs.1708 ↗
36. Perry C, Liu DW, Ingel RP (1985) Phase characterization of partially stabilized zirconia by Raman spectroscopy. J Am Ceram Soc 68(8):C184–C18710.1111/j.1151-2916.1985.tb10176.x ↗
37. Kim DJ, Jung HJ, Yang IS (1993) Raman spectroscopy of tetragonal zirconia solid solutions. J Am Ceram Soc 76(8):2106–210810.1111/j.1151-2916.1993.tb08341.x ↗
38. Nitsche R, Rodewald M, Skandan G, Fuess H, Hahn H (1996) HRTEM study of nanocrystalline zirconia powders. Nanostructured Mater 7(5):535–54610.1016/0965-9773(96)00027-X ↗
39. Chen H, Ding C (2003) Transmission electron microscopy observation of microstructure of plasma-sprayed nanostructured zirconia coating. J Therm Spray Technol 12(4):523–52910.1361/105996303772082260 ↗
40. Ryu J-H, Kil H-S, Song J-H, Lim D-Y, Cho S-B (2012) Glycothermal synthesis of 3 mol% yttria stabilized tetragonal ZrO2 nano powders at low temperature without mineralizers. Powder Technol 221:228–23510.1016/j.powtec.2012.01.006 ↗
41. Handbook A (1979) Metals handbook. Powder Metallurgy 9