journal article·2020-05Open access

A phase-field study on polymerization-induced phase separation occasioned by diffusion and capillary flow—a mechanism for the formation of porous microstructures in membranes

Fei Wang, Lorenz Ratke, Haodong Zhang, Patrick Altschuh, Britta Nestler

Abstract

Abstract The performance and the application of membranes, which are usually produced from polymer solutions, are strongly determined by their porous microstructures. One important mechanism for producing the porous microstructures of membranes is polymerization-induced phase separation (PIPS). Here, we scrutinize PIPS by employing a Cahn–Hilliard–Navier–Stokes method coupling with the Flory–Huggins model. We focus on the formation of membranes via diffusion as well as capillary flow. We report several morphological evolution characteristics of PIPS: (1) an asynchronous effect, where the polymer-rich phase and the polymer-lean phase reach their equilibrium concentrations at different times, (2) a center-to-center movement and collision-induced collision of polymer-rich particles, (3) transition of network structures into polymer particles and rebuilding of network structures from polymer particles, (4) polymer ring patterns. We expect that these findings would shed light on complex microstructures of membranes and provide guidance for the fabrication of desired membranes.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Block Copolymer Self-Assembly · Micro and Nano Robotics · Membrane Separation and Gas Transport

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Pi J-K, Yang H-C, Wan L-S, Wu J, Xu Z-K (2016) Polypropylene microfiltration membranes modified with TiO2 nanoparticles for surface wettability and antifouling property. J Membrane Sci 500:8–1510.1016/j.memsci.2015.11.014 ↗
2. Geng Z, Yang X, Boo C, Zhu S, Lu Y, Fan W, Huo M, Elimelech M (2017) Self-cleaning anti-fouling hybrid ultrafiltration membranes via side chain grafting of poly (aryl ether sulfone) and titanium dioxide. J Membrane Sci 529:1–1010.1016/j.memsci.2017.01.043 ↗
3. Wang Y, Chen KS, Mishler J, Cho SC, Adroher XC (2011) A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research. Appl Energy 88:981–100710.1016/j.apenergy.2010.09.030 ↗
4. Duan J, Pan Y, Pacheco F, Litwiller E, Lai Z, Pinnau I (2015) High-performance polyamide thin-film-nanocomposite reverse osmosis membranes containing hydrophobic zeolitic imidazolate framework-8. J Membrane Sci 476:303–31010.1016/j.memsci.2014.11.038 ↗
5. Kunli GH, Enis K, Euntae Y, Tae-Hyun B (2019) Graphene-based membranes for CO2/CH4 separation: key challenges and perspectives. Appl Sci 9:278410.3390/app9142784 ↗
6. Rodrigues SC, Whitley R, Mendes A (2014) Preparation and characterization of carbon molecular sieve membranes based on resorcinol–formaldehyde resin. J Membrane Sci 459:207–21610.1016/j.memsci.2014.02.013 ↗
7. Wu J, Yuan Q (2002) Gas permeability of a novel cellulose membrane. J Membrane Sci 204:185–19410.1016/S0376-7388(02)00037-6 ↗
8. Pionteck J, Hu J, Schulze U (2003) Membrane properties of microporous structures prepared from polyethylene/polymethacrylate IPN. J Appl Polym Sci 89:1976–198210.1002/app.12414 ↗
9. Takahashi R, Nakanishi K, Soga N (1997) Phase separation process of polymer-Incorporated silica-zirconia sol-gel system. J Sol-Gel Sci Technol 8:71–76
10. Van de Witte P, Dijkstra PJ, Van den Berg JWA, Feijen J (1996) Phase separation processes in polymer solutions in relation to membrane formation. J Membrane Sci 117:1–3110.1016/0376-7388(96)00088-9 ↗
11. Ishigami T, Nii Y, Ohmukai Y, Rajabzadeh S, Matsuyama H (2014) Solidification behavior of polymer solution during membrane preparation by thermally induced phase separation. Membranes 4:13–12210.3390/membranes4010113 ↗
12. Kim JF, Kim JH, Lee YM, Drioli E (2016) Thermally induced phase separation and electrospinning methods for emerging membrane applications: a review. AIChE J 62:461–49010.1002/aic.15076 ↗
13. Baumgart T, Hammond AT, Sengupta P, Hess ST, Holowka DA, Baird BA, Webb WW (2007) Large-scale fluid/fluid phase separation of proteins and lipids in giant plasma membrane vesicles. Proc Natl Acad Sci USA 104:3165–317010.1073/pnas.0611357104 ↗
14. Matsuyama H, Iwatani T, Kitamura Y, Tearamoto M, Sugoh N (2001) Formation of porous poly (ethylene-co-vinyl alcohol) membrane via thermally induced phase separation. J Appl Polym Sci 79:2449–245510.1002/1097-4628(20010328)79:13<2449::AID-APP1052>3.0.CO;2-U ↗
15. Cui Z, Hassankiadeh NT, Lee SY, Woo KT, Lee JM, Sanguineti A, Arcella V, Lee YM, Drioli E (2015) Tailoring novel fibrillar morphologies in poly (vinylidene fluoride) membranes using a low toxic triethylene glycol diacetate (TEGDA) diluent. J Membrane Sci 473:128–13610.1016/j.memsci.2014.09.019 ↗
16. Lee J, Park B, Kim J, Park SB (2015) Effect of PVP, lithium chloride, and glycerol additives on PVDF dual-layer hollow fiber membranes fabricated using simultaneous spinning of TIPS and NIPS. Macromol Res 23:291–29910.1007/s13233-015-3037-x ↗
17. Kaji H, Nakanishi K, Soga N (1993) Polymerization-induced phase separation in silica sol-gel systems containing formamide. J Sol-Gel Sci Technol 23:35–4610.1007/BF00486427 ↗
18. He Y-D, Tang Y-H, Wang X-L (2011) Dissipative particle dynamics simulation on the membrane formation of polymer-diluent system via thermally induced phase separation. J Membrane Sci 368:78–8510.1016/j.memsci.2010.11.010 ↗
19. Ko MJ, Kim SH, Jo WH (2000) The effects of copolymer architecture on phase separation dynamics of immiscible homopolymer blends in the presence of copolymer: a Monte Carlo simulation. Polymer 41:6387–639410.1016/S0032-3861(99)00855-1 ↗
20. Zhou B, Powell AC (2006) Phase field simulations of early stage structure formation during immersion precipitation of polymeric membranes in 2D and 3D. J Membrane Sci 268:150–16410.1016/j.memsci.2005.05.030 ↗
21. Mino Y, Ishigami T, Kagawa Y, Matsuyama H (2015) Three-dimensional phase-field simulations of membrane porous structure formation by thermally induced phase separation in polymer solutions. J Membrane Sci 483:104–11110.1016/j.memsci.2015.02.005 ↗
22. Lee KWD, Chan PK, Feng X (2004) Morphology development and characterization of the phase-separated structure resulting from the thermal-induced phase separation phenomenon in polymer solutions under a temperature gradient. Chem Eng Sci 59:1491–150410.1016/j.ces.2003.12.025 ↗
23. Wang F, Altschuh P, Ratke L, Zhang H, Selzer M, Nestler B (2019) Progress report on phase separation in polymer solutions. Adv Mater 31:180673310.1002/adma.201806733 ↗
24. Schulze MW, McIntosh LD, Hillmyer MA, Lodge PT (2013) High-modulus, high-conductivity nanostructured polymer electrolyte membranes via polymerization-induced phase separation. Nano Lett 14:122–12610.1021/nl4034818 ↗
25. Zhang G, Yang T, Yang S, Wang Y (2017) Morphological-evolution pathway during phase separation in polymer solutions with highly asymmetrical miscibility gap. Phys Rev E 96:03250110.1103/PhysRevE.96.032501 ↗
26. Vandeweerdt P, Berghmans H, Tervoort Y (1991) Temperature-concentration behavior of solutions of polydisperse, atactic poly (methyl methacrylate) and its influence on the formation of amorphous, microporous membranes. Macromolecules 24:3547–355210.1021/ma00012a014 ↗
27. Teraoka I (2002) Polymer solutions, John. Wiley Interscience, New York10.1002/0471224510 ↗
28. Chandra M (2013) Introduction to polymer science and chemistry: a problem-solving approach. CRCPress Taylor & Francis Group, Boca Raton10.1201/b14577 ↗
29. Cowie JMG, Arrighi V (2007) Polymers: chemistry and physics of modern materials. CRCPress, Taylor & Francis Group, Boca Raton10.1201/9781420009873 ↗
30. Potter CB, Davis MT, Albadarin AB, Walker GM (2018) Investigation of the dependence of the Flory–Huggins interaction parameter on temperature and composition in a drug-polymer system. Mol Pharm 15:5327–533510.1021/acs.molpharmaceut.8b00797 ↗
31. Flory PJ (1953) Principles of polymer chemistry. Cornell University Press, London
32. Nies ELF, Koningsveld R, Kleintjens LA (1985) On polymer solution thermodynamics. Prog Colloid Polym Sci. 71:2–1410.1007/BFb0114008 ↗
33. Yamakawa H (1971) Modern theory of polymer solutions. Harper & Row Publishers, New York, electronic edition, Kyoto 2001
34. Carothers WH (1931) Acetylene polymers and their derivatives. II. a new synthetic rubber: chloroprene and its polymers. Chem Rev 8:35310.1021/cr60031a001 ↗
35. Cahn JW, Hilliard JE (1958) Free energy of a nonuniform system. I. interfacial free energy. J Chem Phys 28:258–26710.1063/1.1744102 ↗
36. Cahn JW (1961) On spinodal decomposition. Acta Metall 9:795–80110.1016/0001-6160(61)90182-1 ↗
37. Abels H, Garcke H, Grün G (2012) Thermodynamically consistent, frame indifferent diffuse interface models for incompressible two-phase flows with different densities. Math Models Methods Appl Sci 22:115001310.1142/S0218202511500138 ↗
38. Wang F, Choudhury A, Selzer M, Mukherjee R, Nestler B (2012) Effect of solutal Marangoni convection on motion, coarsening, and coalescence of droplets in a monotectic system. Phys Rev E 86:06631810.1103/PhysRevE.86.066318 ↗
39. Naso A, Náraigh LÓ (2018) A flow-pattern map for phase separation using the Navier–Stokes–Cahn–Hilliard model. Eur J Mech B/Fluids 72:576–58510.1016/j.euromechflu.2018.08.002 ↗
40. Yang X (2018) Numerical approximations for the Cahn–Hilliard phase field model of the binary fluid-surfactant system. J Sci Comput 74:1533–155310.1007/s10915-017-0508-6 ↗
41. Cai Y, Shen J (2018) Error estimates for a fully discretized scheme to a Cahn–Hilliard phase-field model for two-phase incompressible flows. Math Comput 87:2057–209010.1090/mcom/3280 ↗
42. Guo Z, Lin P, Lowengrub J, Wise SM (2017) Mass conservative and energy stable finite difference methods for the quasi-incompressible Navier–Stokes-Cahn–Hilliard system: primitive variable and projection-type schemes. Comput Methods Appl Mech Eng 326:144–17410.1016/j.cma.2017.08.011 ↗
43. Jacqmin D (1999) Calculation of two-phase Navier–Stokes flows using phase-field modeling. J Comput Phys 55:96–12710.1006/jcph.1999.6332 ↗
44. Nestler B, Wheeler AA, Ratke L, Stöcker C (2000) A multi-phase-field model of eutectic and peritectic alloys: numerical simulation of growth structures. Physica D 141:114–13310.1016/S0167-2789(99)00184-0 ↗
45. Anderson DM, McFadden GB, Wheeler AA (2000) A phase-field model of solidification with convection. Physica D 135:175–19410.1016/S0167-2789(99)00109-8 ↗
46. Kim J (2012) Phase-field models for multi-component fluid flows contents. Commun Comput Phys 12:613–66110.4208/cicp.301110.040811a ↗
47. Wang F, Selzer M, Nestler B (2015) On the motion of droplets driven by solutal Marangoni convection in alloy systems with a miscibility gap. Physica D 307:82–9610.1016/j.physd.2015.06.001 ↗
48. Zhao J, Wang Q, Yang X (2016) Numerical approximations to a new phase field model for two phase flows of complex fluids. Comput Methods Appl Mech Eng 310:77–9710.1016/j.cma.2016.06.008 ↗
49. Zarandi MAF, Pillai KM, Barari B (2018) Flow along and across glass-fiber wicks: testing of permeability models through experiments and simulations. AIChE J 64:3491–350110.1002/aic.16195 ↗
50. Jiang L, Liu Y, Teng Y, Zhao J, Zhang Y, Yang M, Song Y (2017) Permeability estimation of porous media by using an improved capillary bundle model based on micro-CT derived pore geometries. Heat Mass Transf 53:49–5810.1007/s00231-016-1795-4 ↗
51. Golovin AA, Nir A, Pismen LM (1995) Spontaneous motion of two droplets caused by mass transfer. Ind Eng Chem Res 34:3278–328810.1021/ie00037a014 ↗
52. Okada M, Fujimoto K, Nose T (1995) Phase separation induced by polymerization of 2-chlorostyrene in a polystyrene/dibutyl phthalate mixture. Macromolecules 28:1795–180010.1021/ma00110a011 ↗