Corrosion behavior of ZrO2–TiO2 nanocomposite thin films coating on stainless steel through sol–gel method
Source abstract
Abstract
Ceramic film has attracted a lot of attention in the last few decades due to its wear resistance, corrosion resistance and resistance to high temperature. This paper describes the characterization of preparing of zirconia (ZrO2)–titania (TiO2) composite films on the stainless steel through a method of dip-coating in sol–gel solution. The samples were sintered at four different temperatures. The surface morphology and crystal structure of the films were characterized by scanning electron microscopy and X-ray diffraction, respectively. The corrosion protection behavior of the ZrO2–TiO2 coated samples immersed in 5 wt% of NaCl solution were evaluated through Tafel polarization curve and electrochemical impedance spectroscopy. The thickness (measured by GD-OES) of the resulting coatings was about 70 nm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Electrophoretic Deposition in Materials Science · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Cheraghi H, Shahmiri M, Sadeghian Z (2012) Corrosion behavior of TiO2–NiO nanocomposite thin films on AISI 316L stainless steel prepared by sol–gel method. Thin Solid Films 522:289–29610.1016/j.tsf.2012.07.125 ↗
2. Michel AA, Mohamed A (1994) Sol–Gel ZrO2 coatings for chemical protection of stainless steel. J Sol Gel Sci Technol 1:177–18410.1007/BF00490247 ↗
3. Liu SW, Wang YM, Xiu ZL, Lu MK, Yu CL (2006) Preparation and photocatalytic properties of La-doped TiO2/ZrTiO4 heterogeneous thin films. J Alloys Compd 425:274–27710.1016/j.jallcom.2006.01.046 ↗
4. Benjaram MR, Pavani MS, Yusuke Y, Xu Q, Tetsuhiko K (2002) Surface characterization of sulfate, molybdate, and tungstate promoted TiO2–ZrO2 solid acid catalysts by XPS and other techniques. Appl Catal A 228:269–27810.1016/S0926-860X(01)00982-6 ↗
5. George A, Solomon S, Thomas JK, John A (2012) Characterizations and electrical properties of ZrTiO4 ceramic. Mater Res Bull 47:3141–314710.1016/j.materresbull.2012.08.018 ↗
6. Biju KP, Jain MK (2008) Sol–gel derived TiO2:ZrO2 multilayer thin films for humidity sensing application. Sens Actuators B 128:407–41310.1016/j.snb.2007.06.029 ↗
7. Liang LP, Sheng YG, Xu Y, Wu D, Sun YH (2007) Optical properties of sol–gel derived ZrO2–TiO2 composite films. Thin Solid Films 515:7765–777110.1016/j.tsf.2007.03.142 ↗
8. Salahinejad E, Hadianfard MJ, Macdonald DD (2012) Aqueous sol–gel synthesis of zirconium titanate(ZrTiO4) nanoparticles using chloride precursors. Ceram Int 38:6145–614910.1016/j.ceramint.2012.04.064 ↗
9. Shao GN, Imran SM, Jeon SJ, Engole M, Abbas N, Haider MS, Kang SJ, Kima HT (2014) Sol–gel synthesis of photoactive zirconia–titania from metal salts and investigation of their photocatalytic properties in the photodegradation of methylene blue. Powder Technol 258:99–10910.1016/j.powtec.2014.03.024 ↗
10. Pamu D, Sudheendran K, Krishna MG, Raju KCJ (2010) Dielectric properties of ambient temperature grown nanocrystalline ZrTiO4 thin films using DC magnetron sputtering. Mater Sci Eng B 168:208–21310.1016/j.mseb.2009.12.028 ↗
11. Reddy BM, Sreekanth PM, Yamada Y, Xu Q (2002) Tetsuhiko Kobayashi, surface characterization of sulfate, molybdate,and tungstate promoted TiO2–ZrO2 solid acid catalysts by XPS and other techniques. Appl Catal A 228:269–27810.1016/S0926-860X(01)00982-6 ↗
12. Salahinejad E, Hadianfard MJ, Macdonald DD, Mozafari M, Vashaee D, Tayebi L (2012) Zirconium titanate thin film prepared by an aqueous particulate sol–gel spin coating process using carboxymethyl cellulose as dispersant. Mater Lett 88:5–810.1016/j.matlet.2012.08.013 ↗
13. Rouhani P, Salahinejad E, Kaul R, Vashaee D, Tayebi L (2013) Nanostructured zirconium titanate fibers prepared by particulate sol–gel and cellulose templating techniques. J Alloys Compd 568:102–10510.1016/j.jallcom.2013.03.142 ↗
14. Pamu D, Sudheendran K, Krishna GM (2008) Dielectric properties of ambient temperature grown nanocrystalline ZrTiO4 thin films using DC magnetron sputtering. Mater Sci Eng B Adv Funct Solid State Mater 168:208–21310.1016/j.mseb.2009.12.028 ↗
15. Hsu CH, Tseng CF, Lai CH, Tung HH, Lin SY (2010) Structural and electrical characteristics of ZrO2–TiO2 thin films by sol–gel method. Mater Sci Eng B 175:181–18410.1016/j.mseb.2010.07.010 ↗
16. Hsu CH, Lin SY (2013) Characterization of ZrTiO4 thin films prepared by sol–gel method. Mater Sci Semicond Process 16:1262–126610.1016/j.mssp.2013.01.015 ↗
17. Zou H, LinYS (2004) Structural and surface chemical properties of sol–gel derived TiO2–ZrO2 oxides. Appl Catal A 265:35–4210.1016/j.apcata.2004.01.015 ↗
18. Babaei M, Dehghanian C, Babaei M (2015) Electrochemical assessment of characteristics and corrosion behavior of Zr-containing coatings formed on titanium by plasma electrolytic oxidation. Surf Coat Technol 279:79–9110.1016/j.surfcoat.2015.08.026 ↗
19. Adraider Y, Pang YX, Nabhani F, Hodgson SN, Sharp MC (2013) Fabrication of zirconium oxide coatings on stainless steel by a combined laser/sol–gel technique. Ceram Int 39:9665–967010.1016/j.ceramint.2013.05.089 ↗
20. Li HB, Liang KM, Mei LF, Gu SR, Wang SX (2001) Corrosion protection of mild steel by zirconia sol–gel coatings. J Mater Sci Lett 20:1081–108310.1023/A:1010918224936 ↗
21. Paussa L, Navarro NCR, Bravin D, Andreatta F, Lanzutti A, Aparicio M, Durán A, Fedrizzi L (2012) ZrO2 sol–gel pre-treatments doped with cerium nitrate for the corrosion protection of AA6060. Prog Org Coat 74:311–31910.1016/j.porgcoat.2011.08.017 ↗
22. Sharifalhoseini Z, Entezari MH, Shahidi M (2016) Mechanistic investigation of the influence of phosphoric and boric acids in the formation of homogeneous Ni-P/ZnO and SiO2 coatings. J Colloid Interface Sci 464:291–30010.1016/j.jcis.2015.11.023 ↗
23. Sandhyarani M, Rameshbabu N, Venkateswarlu K, Sreekanth D, Subrahmanyam C (2013) Surface morphology, corrosion resistance and in vitro bioactivity of P containing ZrO2 films formed on Zr by plasma electrolytic oxidation. J Alloys Compd 553:324–33210.1016/j.jallcom.2012.11.147 ↗
24. Abd El-Lateef HM, Khalaf MM (2015) Corrosion resistance of ZrO2–TiO2 nanocomposite multilayer thin films coated on carbon steel in hydrochloric acid solution. Mater Charact 108:29–4110.1016/j.matchar.2015.08.010 ↗
25. Norouzi M, Garekani AA (2014) Corrosion protection by zirconia-based thin films deposited by a sol–gel spin coating method. Ceram Int 40:2857–286110.1016/j.ceramint.2013.10.027 ↗
26. Yugeswaran S, Yoganand CP, Kobayashi A, Paraskevopoulos KM, Subramanian B (2012) Mechanical properties, electrochemical corrosion and in vitro bioactivity of yttria stabilized zirconia reinforced hydroxyapatite coatings prepared by gas tunnel type plasma spraying. J Mech Behav Biomed Mater 9:22–3310.1016/j.jmbbm.2011.11.002 ↗
27. Li Q, Chen B, Xu SQ, Gao H, Zhang L, Liu C (2009) Structural and electrochemical behavior of sol–gel ZrO2 ceramic film on chemically pre-treated AZ91D magnesium alloy. J Alloys Compd 478:544–54910.1016/j.jallcom.2008.11.123 ↗
28. Salahinejad E, Hadianfard MJ, Macdonald DD, Mozafari M, Vashaee D, Tayebi L (2013) Multilayer zirconium titanate thin films prepared by a sol–gel. Ceram Int 39:1271–127610.1016/j.ceramint.2012.07.058 ↗
29. Niksefat V, Ghorbani M (2015) Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni–B–TiO2 composite coatings. J Alloys Compd 633:127–13610.1016/j.jallcom.2015.01.250 ↗
30. Ng KW, Man HC, Yue TM (2008) Corrosion and wear properties of laser surface modified NiTi with Mo and ZrO2. Appl Surf Sci 254:6725–673010.1016/j.apsusc.2008.04.076 ↗
31. Cosentino IC, Muccillo ENS, Muccillo R (2006) Low-temperature sol–gel synthesis of single-phase ZrTiO4 nanoparticles. J Sol Gel Sci Technol 37:31–3710.1007/s10971-005-5062-2 ↗