CuO photoelectrodes synthesized by the sol–gel method for water splitting
Source abstract
Abstract
CuO is an attractive photocatalytic material for water splitting due to its high earth abundance and low cost. In this paper, we report the deposition of CuO thin films by sol–gel dip-coating process. Sol deposition has attractive advantages including low-cost solution processing and uniform film formation over large areas with a fairly good control of the film stoichiometry and thickness. Pure CuO phase was obtained for calcination temperatures higher than 360 °C in air. The CuO photocurrents for hydrogen evolution depend on the crystallinity and the microstructure of the film. Values of −0.94 mA cm−2 at pH = 8 and 0 V vs. RHE were achieved for CuO photoelectrodes annealed at 400 °C under air. More interestingly, the stability of the photoelectrode was enhanced upon the sol–gel deposition of a TiO2 protective layer. In this all sol–gel CuO/TiO2 photocathode, a photocurrent of −0.5 mA cm−2 is achieved at pH = 7 and 0 V vs. RHE with a stability of ~100% over 600 s.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper-based nanomaterials and applications · ZnO doping and properties · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Dudley B (2014) BP Energy Outlook 2035. BP’s Energy Outlook 94:1-7.
2. Lewis NS, Nocera DGL (2006) Powering the planet: chemical challenges in solar energy utilization. PNAS 103(43):15729–1573510.1073/pnas.0603395103 ↗
3. Yilanci A, Dincer I, Ozturk HK (2009) A review on solar-hydrogen/fuel cell hybri energy systems for stationary applications. Prog Energy Combust Sci 35(3):231–24410.1016/j.pecs.2008.07.004 ↗
4. Fujishima A, Honda K (1972) Electrochemical photolysis of water at a semiconductor electrode. Nature 238:37–3810.1038/238037a0 ↗
5. Van de krol R (2012) Principles of photoelectrochemical cells. In: van de Krol R, Grätzel M(ed) Photoelectrochemical hydrogen production. electronic materials: science & technology. Springer, Boston, MA, Boston, p 13–67. Vol. 10210.1007/978-1-4614-1380-6 ↗
6. Wadia C, Alivisatos AP, Kammen DM (2009) Materials availability expands the opportunity for large-scale photovoltaics deployment. Environ Sci Technol 43(6):2072–207710.1021/es8019534 ↗
7. Dincer I (2002) Technical, environmental and exergetic aspects of hydrogen energy systems. Int J Hydrog Energ 27(3):265–28510.1016/S0360-3199(01)00119-7 ↗
8. Bhat SSM, Jang HW (2017) Recent advances in bismuth-based nanomaterials for photoelectrochemical water splitting. Chemsuschem 10(15):3001–301810.1002/cssc.201700633 ↗
9. Abdi FF, Berglund SP (2017) Recent developments in complex metal oxide photoelectrodes. J Phys D-Appl Phys 50(19):2210.1088/1361-6463/aa6738 ↗
10. Courtin E, Baldinozzi G, Sougrati MT, Stievano L, Sanchez C, Laberty-Robert C (2014) New Fe2TiO5-based nanoheterostructured mesoporous photoanodes with improved visible light photoresponses. J Mater Chem A 2(18):6567–657710.1039/C4TA00102H ↗
11. Hamd W, Cobo S, Fize J, Baldinozzi G, Schwartz W, Reymermier M, Pereira A, Fontecave M, Artero V, Laberty-Robert C, Sanchez C (2012) Mesoporous alpha-Fe2O3 thin films synthesized via the sol-gel process for light-driven water oxidation. Phys Chem Chem Phys 14(38):13224–1323210.1039/c2cp42535a ↗
12. Iandolo B, Wickman B, Zoric I, Hellman A (2015) The rise of hematite: origin and strategies to reduce the high onset potential for the oxygen evolution reaction. J Mater Chem A 3(33):16896–1691210.1039/C5TA03362D ↗
13. Sivula K, Le Formal F, Gratzel M (2011) Solar water splitting: progress using hematite (alpha-Fe2O3) photoelectrodes. Chemsuschem 4(4):432–44910.1002/cssc.201000416 ↗
14. Hilliard S, Baldinozzi G, Friedrich D, Kressman S, Strub H, Artero V, Laberty-Robert C (2017) Mesoporous thin film WO3 photoanode for photoelectrochemical water splitting: a sol-gel dip coating approach. Sustain Energy Fuels 1(1):145–15310.1039/C6SE00001K ↗
15. Hilliard S, Friedrich D, Kressman S, Strub H, Artero V, Laberty-Robert C (2017) Solar-water-splitting BiVO4 thin-film photoanodes prepared by using a sol-gel dip-coating technique. ChemPhotoChem 1(6):273–28010.1002/cptc.201700003 ↗
16. Song J, Cha J, Lee MG, Jeong HW, Seo S, Yoo JA, Kim TL, Lee J, No H, Kim DH, Jeong SY, An H, Lee BH, Bark CW, Park H, Jang HW, Lee S (2017) Template-engineered epitaxial BiVO4 photoanodes for efficient solar water splitting. J Mater Chem A 5(35):18831–1883810.1039/C7TA04695B ↗
17. Paracchino A, Laporte V, Sivula K, Gratzel M, Thimsen E (2011) Highly active oxide photocathode for photoelectrochemical water reduction. Nat Mater 10(6):456–46110.1038/nmat3017 ↗
18. Yoon SKM, Kim IS, Lim JH, Yoo B (2014) Manipulation of cuprous oxide surfaces for improving their photocatalytic activity. J Mater Chem A 2:11621–1162710.1039/C4TA00616J ↗
19. Lin CY, Lai YH, Mersch D, Reisner E (2012) Cu2O|NiOx nanocomposite as an inexpensive photocathode in photoelectrochemical water splitting. Chem Sci 3:3482–348710.1039/c2sc20874a ↗
20. Paracchino A, Brauer JC, Moser JE, Thimsen E, Graetzel M (2012) Synthesis and characterization of high-photoactivity electrodeposited Cu2O solar absorber by photoelectrochemistry and ultrafast spectroscopy. J Phys Chem C 116(13):7341–735010.1021/jp301176y ↗
21. Zhang Z, Wang P (2012) Highly stable copper oxide composite as an effective photocathode for water splitting via a facile electrochemical synthesis strategy. J Mater Chem 22:245610.1039/C1JM14478B ↗
22. Zhang Z, Dua R, Zhang L, Zhu H, Zhang H, Wang P (2013) Carbon-layer-protected cuprous oxide nanowire arrays for efficient water reduction. ACS Nano 7:1709–171710.1021/nn3057092 ↗
23. Lim YF, Chua CS, Lee CJ, Chi D (2014) Sol-gel deposited Cu2O and CuO thin films for photocatalytic water splitting. Phys Chem Chem Phys 16:25928–2593410.1039/C4CP03241A ↗
24. Jin Z, Zhang X, Li Y, Li S, Lu G (2007) 5.1% Apparent quantum efficiency for stable hydrogen generation over eosin-sensitized CuO/TiO2 photocatalyst under visible light irradiation. Catal Commun 8:1267–127310.1016/j.catcom.2006.11.019 ↗
25. Liu ZBH, Xu S, Sun DD (2011) Hierarchical CuO/ZnO “corn-like” architecture for photocatalytic hydrogen generation. Int J Hydrog Energ 36(21):13473–1348010.1016/j.ijhydene.2011.07.137 ↗
26. Pai YHF, Fang SY (2013) Preparation and characterization of porous Nb2O5 photocatalysts with CuO, NiO and Pt cocatalyst for hydrogen production by light-induced water splitting. J Power Sources 230:321–32610.1016/j.jpowsour.2012.12.078 ↗
27. Paracchino A, Mathieu N, Hisatomi T, Stefik M, Tilley SD, Graetzel M (2012) Ultrathin films on copper(I) oxide water splitting photocathodes: a study on performance and stability. Energy Environ Sci 5:8673–868110.1039/c2ee22063f ↗
28. Morales-Guio CG, Tilley SD, Vrubel H, Gratzel M, Hu XL (2014) Hydrogen evolution from a copper(I) oxide photocathode coated with an amorphous molybdenum sulphide catalyst. Nat Commun 5:1-96.10.1038/ncomms4059 ↗
29. Hench L, Hench, West JK (1990) The sol-gel process. Chem Rev 90(1):33–7210.1021/cr00099a003 ↗
30. Jia QX, McCleskey MTM, Burrell AK, Lin Y, Collis GE, Wang H, Li Q, Foltyn SR (2004) Polymer-assisted deposition of metal-oxide films. Natture Mater 3:529–53210.1038/nmat1163 ↗
31. Ray SC (2001) Preparation of copper oxide thin film by the solègel like dip technique and study of their structural and optical properties. Sol Energy Mater Sol Cells 68(3-4):307–31210.1016/S0927-0248(00)00364-0 ↗
32. Grosso D, Soler-Illia G, Crepaldi EL, Cagnol FF, Sinturel C,C, Bourgeois A, Brunet-Bruneau A, Amenitsch H, Albouy PA, Sanchez CN (2003) Highly porous TiO2 Anatase optical thin films with cubic mesostructure stabilised at 700°C. Chem Mater 15(24):456210.1021/cm031060h ↗
33. Patterson AL (1939) The scherrer formula for X-ray particle size determination. Phys Rev 56(10):978–98210.1103/PhysRev.56.978 ↗
34. Koshy J, Goerge KC (2015) Annealing effects on crystallite size and band gap of CuO nanoparticles. Int J Nanosci Nanotechnol 6(1):1–8
35. Habibi MH, Bahareh B (2014) Effect of annealing temperature on crystalline phase of copper oxide nanoparticle by coppe acetate precursor and sol-gel method. J Therm Anal Calorim 115(1):419–42310.1007/s10973-013-3255-4 ↗
36. Nakaoka K, Ueyama J, Ogura K (2004) Photoelectrochemical behavior of electrodeposited CuO and Cu2O thin films on conducting substrates. J Electrochem Soc 151:C661–C66510.1149/1.1789155 ↗
37. Kidowaki HO, Akiyama T, Suzuki A, Jeyadevan B, Cuya J (2012) Fabrication and Characterization of CuO-based solar cells. J Mater Sci Res 1(1):138–143
38. Johan MR, Suan MSM, Hawari NL, Ching HA (2011) Annealing effects on the properties of copper oxide thin films prepared by chemical deposition. Int J Electrochem Sci 6:6094–610410.1016/S1452-3981(23)19665-9 ↗
39. Choudhary S, Solanki A, Upadhyay S, Singh N, Satsangi VR, Shrivastav R, Dass S (2013) Nanostructured CuO/SrTiO3bilayered thin films for photoelectrochemical water splitting. J Solid State Electrochem 17(9):2531–253810.1007/s10008-013-2139-7 ↗
40. Zhang ZH, Wang P (2012) Highly stable copper oxide composite as an effective photocathode for water splitting via a facile electrochemical synthesis strategy. J Mater Chem 22(6):2456–246410.1039/C1JM14478B ↗
41. Ma Q-B, Hofmann JP, Litke A, Hensen EJM (2015) Cu2O photoelectrodes for solar water splitting: tuning photoelectrochemical performance by controlled faceting. Sol Energy Mater Sol Cells 141:178–18610.1016/j.solmat.2015.05.025 ↗
42. Siripala W, Ivanovskaya A, Jaramillo TF, Baeck S-H, McFarland EW (2003) A Cu2O/TiO2heterojunction thin film cathode for photoelectrocatalysis. Sol Energy Mater Sol Cells 77(3):229–23710.1016/S0927-0248(02)00343-4 ↗
43. Rokhmat M, Wibowo E, Sutisna, Khairurrijal, Abdullah M (2017) Performance improvement of TiO2/CuO solar cell by growing copper particle using fix current electroplating method. Procedia Eng 170(Supplement C):72–7710.1016/j.proeng.2017.03.014 ↗
44. Zainun AR, Tomoya S, Mohd Noor U, Rusop M, Masaya I (2012) New approach for generating Cu2O/TiO2 composite films for solar cell applications. Mater Lett 66(1):254–25610.1016/j.matlet.2011.08.032 ↗
45. Wang P, Wen X, Amal R, Ng YH (2015) Introducing a protective interlayer of TiO2 in Cu2O-CuO heterojunction thin film as a highly stable visible light photocathode. RSC Adv 5(7):5231–523610.1039/C4RA13464H ↗
46. Toupin J, Strub HP, Kressmann S, Boudot M, Artero V, Laberty C (2017) Engineering n-p junction for photo-electrochemical hydrogen production. Phys Chem Chem Phys.10.1039/C7CP05122K ↗