Mechanical strengths and thermal properties of titania-doped alumina aerogels and the application as high-temperature thermal insulator
Source abstract
Abstract
Alumina (Al2O3)-based diphasic aerogels have better physical properties than those of pure Al2O3 aerogel according to previous studies. In the present research, we focused on an alumina–titania (Al2O3-TiO2) diphasic aerogel. A series of Al2O3 aerogels were synthesized and studied with and without minor TiO2 dopants (up to 10 mol%). We found that the pure Al2O3 aerogel, which had the fiber-like particles, was stronger than those with TiO2 dopants that possessed the sphere-like particles. However, the sphere-like particles make the TiO2-doped Al2O3 aerogel (with 3 mol% TiO2) possessing the largest specific surface area (SSA) of 650 m2/g, much larger than that of the pure Al2O3 aerogel (326 m2/g). This work proved that fiber-like particles enhance strength but reduce SSA of Al2O3 aerogel. At last, ceramic fibers reinforced Al2O3 aerogel composites with the sizes of 20 cm width × 20 cm length × 1 cm thickness were fabricated. The aerogel composites possessed a thermal conductivity of 0.136 W/m K at 1000 °C, better than those of the ceramic fiber blankets itself (0.30 W/m K), indicating potential application as high-temperature thermal insulator.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aerogels and thermal insulation · Supercapacitor Materials and Fabrication · Mesoporous Materials and Catalysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Hüsing N, Schubert U (2010) Aerogels-airy materials: chemistry, structure, and properties. Angew Chem Int Ed 37:22–4510.1002/(SICI)1521-3773(19980202)37:1/2<22::AID-ANIE22>3.0.CO;2-I ↗
2. Dorcheh AS, Abbasi MH (2008) Silica aerogel; synthesis, properties and characterization. J Mater Process Tech. 199:10–2610.1016/j.jmatprotec.2007.10.060 ↗
3. Zu G, Shimizu T, Kanamori K, Zhu Y, Maeno A, Kaji H, Shen J, Nakanishi K (2018) Transparent, superflexible doubly cross-linked polyvinylpolymethylsiloxane aerogel superinsulators via ambient pressure drying. ACS Nano 12:521–53210.1021/acsnano.7b07117 ↗
4. Zu G, Kanamori K, Maeno A, Kaji H, Nakanishi K (2018) Superflexible multifunctional polyvinylpolydimethylsiloxane-based aerogels as efficient absorbents, thermal superinsulators, and strain sensors. Angew Chem Int Ed 57:9722–972710.1002/anie.201804559 ↗
5. Zu G, Kanamori K, Shimizu T, Zhu Y, Maeno A, Kaji H, Nakanishi K, Shen J (2018) Versatile double-cross-linking approach to transparent, machinable, supercompressible, highly bendable aerogel thermal superinsulators. Chem Mater 30:2759–277010.1021/acs.chemmater.8b00563 ↗
6. Emmerling A, Gross J, Gerlach R, Goswin R, Reichenauer G (1990) Isothermal sintering SiO2-aerogels. J Non-Cryst Solids 125:230–24310.1016/0022-3093(90)90853-E ↗
7. Dong JS, Park TJ (1996) Sol–gel strategies for pore size control of high-surface-area transition-metal oxide aerogels. Chem Mater 8:509–51310.1021/cm950407g ↗
8. Suh DJ, Park TJ, Han HY, Lim JC (2002) Synthesis of high-surface-area zirconia aerogels with a well-developed mesoporous texture using CO2 supercritical drying. Chem Mater 141:452–1454
9. Campbell LK, Na BK, Ko EI (1992) Synthesis and characterization of titania aerogels. Chem Mater 4:1329–133310.1021/cm00024a037 ↗
10. Keysar S, Shter GE, Hazan YD, Cohen AY, Grader GS (1997) Heat treatment of alumina aerogels. Chem Mater 9:2464–246710.1021/cm970208s ↗
11. Hirashima H, Kojima C, Imai H (1997) Application of alumina aerogels as catalysts. J Sol–Gel Sci Technol 8:843–846
12. Pierre AC, Pajonk GM (2002) Chemistry of aerogels and their applications. Chem Rev 102:4243–426510.1021/cr0101306 ↗
13. Xu L, Jiang Y, Feng J, Feng J, Yue C (2015) Infrared-opacified Al2O3-SiO2 aerogel composites reinforced by SiC-coated mullite fibers for thermal insulations. Ceram Int 41:437–44210.1016/j.ceramint.2014.08.088 ↗
14. Kucheyev SO, Baumann TF, Cox CA, Wang YM (2006) Nanoengineering mechanically robust aerogels via control of foam morphology. Appl Phys Lett 89:04191110.1063/1.2236222 ↗
15. Zu G, Shen J, Zou L, Wang W, Lian Y, Zhang Z, Du A (2013) Nanoengineering super heat-resistant, strong alumina aerogels. Chem Mater 25:4757–476410.1021/cm402900y ↗
16. Zu G, Shen J, Wang W, Zou L, Lian Y, Zhang Z, Liu B, Zhang F (2014) Robust, highly thermally stable, core-shell nanostructured metal oxide aerogels as high-temperature thermal superinsulators, adsorbents, and catalysts. Chem Mater 26:5761–577210.1021/cm502886t ↗
17. Hurwitz FI, Gallagher MT, Olin C, Shave MK, Ittes M, Olafson KN, Fields MG, Rogers RB (2014) Optimization of alumina and aluminosilicate aerogel structure for high-temperature performance. Int J Appl Glass Sci 5:276–28610.1111/ijag.12070 ↗
18. Benad A, Jurries F, Vetter B, Klemmed B, Hubner R (2018) Mechanical properties of metal oxide aerogels. Chem Mater 30:145–15210.1021/acs.chemmater.7b03911 ↗
19. Kwon YG, Choi SY, Kang ES, Baek SS (2000) Ambient-dried silica aerogel doped with TiO2 powder for thermal insulation. J Mater Sci 35:6075–607910.1023/A:1026775632209 ↗
20. Kuhn J, Gleissner T, Schuster MCA, Korder S, Fricke J (1995) Integration of mineral powders into SiO2 aerogels. J Non-Cryst Solids 186:291–29510.1016/0022-3093(95)00067-4 ↗
21. Wang J, Kuhn J, Lu X (1995) Monolithic silica aerogel insulation doped with TiO2 powder and ceramic fibers. J Non-Cryst Solids 186:296–30010.1016/0022-3093(95)00068-2 ↗
22. Zhang H, Qiao Y, Zhang X, Fang S (2010) Structural and thermal study of highly porous nanocomposite SiO2-based aerogels. J Non-Cryst Solids 356:879–88310.1016/j.jnoncrysol.2010.01.003 ↗
23. Yang J, Wang Q, Wang T (2017) Effects of Ti addition on alumina/titania composite aerogels synthesized by Sol–Gel process and supercritical ethanol drying. J Chin Chem Soc 64:978–98510.1002/jccs.201600822 ↗
24. Hurwitz FI, Rogers RB, Sheets EJ, Miller DR, Newlin KN (2012) Influence of Ti addition on boehmite-derived aluminum silicate aerogels: structure and properties. J Sol–Gel Sci Technol 64:367–37410.1007/s10971-012-2866-8 ↗
25. Erkalfa H, Misirli Z, Baykara T (1998) The effect of TiO2 and MnO2 on the densification and microstructural development of alumina. Ceram Int 24:81–9010.1016/S0272-8842(97)00082-5 ↗
26. Baes CF, Mesmer RE (1976) The hydrolysis of cations. Wiley, New York
27. Livage J, Henry M, Sanchez C (1988) Sol–gel chemistry of transition metal oxides. Prog Solid State Chem 18:259–34110.1016/0079-6786(88)90005-2 ↗
28. Bolt PH, Habraken FHPM, Geus JW (1998) Formation of nickel, cobalt, copper, and iron aluminates from α- and γ-alumina-supported oxides: a comparative study. J Solid State Chem 135:59–6910.1006/jssc.1997.7590 ↗
29. Smith JS (2012) The synthesis and structural characterization of metal oxide nanoparticles having catalytic applications. https://scholarsarchive.byu.edu/etd/3667 . Accessed 3 July 2012
30. Sun X, Wu Y, Wang Y, Li M (2019) Investigation of the effect of lanthanum oxide on the thermal stability of alumina aerogel. J Porous Mater 26:327–33310.1007/s10934-018-0599-y ↗
31. Wu L, Huang Y, Wang Z, Liu L, Xu H (2010) Fabrication of hydrophobic alumina aerogel monoliths by surface modification and ambient pressure drying. Appl Surf Sci 256:5973–597710.1016/j.apsusc.2010.03.104 ↗
32. Hurwitz FI, Rogers RB, Guo H, Yu K, Domanowski J, Schmid E, Fields MG (2017) The role of phase changes in maintaining pore structure on thermal exposure of aluminosilicate aerogels. MRS Commun 7:1–910.1557/mrc.2017.89 ↗
33. Mercuri F, Costa D, Marcus P (2009) Theoretical investigations of the relaxation and reconstruction of the γ-AlO(OH) boehmite (101) surface and boehmite nanorods. J Phys Chem C 113:5228–523710.1021/jp810059w ↗
34. Ren L, Li X, Cui S (2016) Synthesis of monolithic Fe2O3–Al2O3 composite aerogels via organic solvent sublimation drying. J Nanomater 2016:813504310.1155/2016/8135043 ↗
35. Li X, He H, Cui S, Ren L (2012) Synthesis and characterization of the monolithic NiO-Al2O3 aerogels. Am J Anal Chem 3:946–94910.4236/ajac.2012.312A125 ↗
36. Yoldas BE (1992) In: Hench L, West JKChemical Processing of Advanced Materials. Wiley, New York
37. Poco JF, Satcher JH, Hrubesh LW (2001) Synthesis of high porosity, monolithic alumina aerogels. J Non-Cryst Solids 285:57–6310.1016/S0022-3093(01)00432-X ↗
38. Zhong Y, Kong Y, Shen X, Cui S, Yi X, Zhang J (2013) Synthesis of a novel porous material comprising carbon/alumina composite aerogels monoliths with high compressive strength. Microporous Mesoporous Mater 172:182–18910.1016/j.micromeso.2013.01.021 ↗
39. Hayase G, Nonomura K, Kanamori K, Maeno A, Kaji H, Nakanishi K (2016) Boehmite nanofiber-polymethylsilsesquioxane core-shell porous monoliths for a thermal insulator under low vacuum conditions. Chem Mater 28:3237–324010.1021/acs.chemmater.6b01010 ↗
40. Saran G (2012) Investigation of refractory thermal insulation material. https://ieeexplore.ieee.org/abstract/document/6357515 . Accessed 18–21 Sept 201210.1109/IFOST.2012.6357515 ↗