Gelcasting preparation of porous silicon nitride ceramics by adjusting the content of monomers
Source abstract
Abstract
The gelcasting preparation of high-performance porous Si3N4 ceramics by merely increasing monomer content in the slurry without other organic additives was presented, and the influences of monomer content and the ratio of monomers on gelcasting preparation of porous Si3N4 ceramics were investigated. The results suggest that monomer content and the ratio of monomers have great influences on the performances of green body and sintered body of porous Si3N4 ceramics, and the warpage and shrinkage of green body can be effectively improved by selecting reasonable the ratio of monomers. High-performance sintered body was achieved by high-performance green body. The pore size of porous Si3N4 ceramics is less than 1 μm, and the flexural strength and porosity are above 130 MPa and above 50%, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Riley FL (2000) J Am Ceram Soc 83:245–26510.1111/j.1151-2916.2000.tb01182.x ↗
2. Yang JF, Díaz SA (2002) J Am Ceram Soc 85:1512–151610.1111/j.1151-2916.2002.tb00305.x ↗
3. Ohji T (2008) Mater Sci Eng A 498:5–1110.1016/j.msea.2007.09.104 ↗
4. Zhang W, Wang HJ, Jin ZH (2005) J Mater Sci Technol 21:894–898
5. Yang JF, Janssen R, Schneider G, Ohji T, Kanzaki S (2005) Acta Mater 53:2981–299010.1016/j.actamat.2005.03.011 ↗
6. Inagaki Y, Kondo N, Ohji T (2002) J Eur Ceram Soc 22:2489–249410.1016/S0955-2219(02)00107-3 ↗
7. Chen DY, Zhang BL, Zhuang HR, Li WL (2003) Ceram Int 29:363–36410.1016/S0272-8842(02)00145-1 ↗
8. Yang JF, Zhang GJ, Kondo N, Ohji T, Kanzaki S (2005) J Am Ceram Soc 88:1030–103210.1111/j.1551-2916.2005.00199.x ↗
9. Shigegaki Y, Brito ME, Toriyama M, Kanzaki S (1997) J Am Ceram Soc 80:495–49810.1111/j.1151-2916.1997.tb02856.x ↗
10. Yang JF, Ohji T, Niihara K (2000) J Am Ceram Soc 83:2094–209610.1111/j.1151-2916.2000.tb01520.x ↗
11. Yang JF, Deng ZY, Ohji T (2003) J Eur Ceram Soc 23:371–37810.1016/S0955-2219(02)00175-9 ↗
12. Yf Shao, Jia DC, Liu BY (2009) J Eur Ceram Soc 29:1529–153410.1016/j.jeurceramsoc.2008.09.012 ↗
13. Diaz A, Hampshire S (2004) J Eur Ceram Soc 24:413–41910.1016/S0955-2219(03)00212-7 ↗
14. Zhang W, Wang HJ, Jin ZH (2005) Mater Lett 59:250–25610.1016/j.matlet.2004.07.059 ↗
15. Vandeperre LJ, De Wilde AM, Luyten J (2003) J Mater Process Technol 135:312–31610.1016/S0924-0136(02)00862-2 ↗
16. Giuliano T (2003) Am Ceram Soc Bull 82:43–47
17. Adolfsson E (2006) J Am Ceram Soc 89:1897–190210.1111/j.1551-2916.2006.01040.x ↗
18. Nangrejo MR, Edirisinghe MJ (2002) J Porous Mater 9:131–14010.1023/A:1020834509443 ↗
19. Janney MA, Nunn SD, Walls CA, Omatete OO, Ogle RB, Kirby GH, Mcmillan AD (1998) Gelcasting. The handbook of ceramic engineering. M Dekker Inc, New York
20. Yi ZZ, Xie ZP, Huang Y, Ma JT, Cheng YB (2002) Ceram Int 28:369–37610.1016/S0272-8842(01)00104-3 ↗
21. Hu YC, Wang ZJ, Lu JY (2008) J Non-Cryst Solids 354:1285–128910.1016/j.jnoncrysol.2007.01.109 ↗
22. Santacruz I, Nieto MI, Binner J, Moreno R (2009) Ceram Int 35:321–32610.1016/j.ceramint.2007.10.009 ↗
23. Ramay HR, Zhang MQ (2003) Biomaterials 24:3293–330210.1016/S0142-9612(03)00171-6 ↗
24. Tulliani JM, Bartuli C, Bemporad E, Naglieri V, Sebastiani M (2009) Ceram Int 35:2481–249110.1016/j.ceramint.2009.02.017 ↗
25. Park JK, Lee JS, Lee SI (2002) J Porous Mater 9:203–21010.1023/A:1020939018359 ↗
26. Chen RF, Huang Y, Wang CA, Qi JQ (2007) J Am Ceram Soc 90:3424–342910.1111/j.1551-2916.2007.01915.x ↗
27. Meng GY, Wang HT, Zheng WJ, Liu XQ (2000) Mater Lett 45:224–22710.1016/S0167-577X(00)00109-9 ↗
28. Liu YF, Liu XQ, Wei H, Meng GY (2001) Ceram Int 27:1–710.1016/S0272-8842(00)00034-1 ↗
29. Zhang FZ, Kato T, Fuji M, Takahashi M (2006) J Eur Ceram Soc 26:667–67110.1016/j.jeurceramsoc.2005.07.021 ↗
30. Ma JT, Xie ZP, Miao HZ (2003) J Eur Ceram Soc 23:2273–227910.1016/S0955-2219(03)00041-4 ↗
31. Janney MA, Omatete OO, Walls CA, Nunn SD, Ogle RA, Westmoreland G (1998) J Am Ceram Soc 81:581–59110.1111/j.1151-2916.1998.tb02377.x ↗
32. Wang YL, Hao JJ, Guo ZM (2007) J Mater Sci Eng 25:262–264
33. Gu XR, Zhu YP (2004) Gel chemistry. Chemistry Industry Press, Beijing
34. Ghosal S, Abbas EN, Harn YP (1999) J Am Ceram Soc 82:513–52010.1111/j.1151-2916.1999.tb01795.x ↗
35. Zhang GJ, Yang JF, Ohji T (2002) Mater Sci Eng A 328:201–20510.1016/S0921-5093(01)01677-X ↗
36. Ha JS (2000) Ceram Int 26:251–25410.1016/S0272-8842(99)00050-4 ↗
37. Wang HJ, Jia SH, Wang YL (2001) J XJTU Univ, China 35:403–406
38. Suzuki Y, Nozaki K, Tetsuya Y, Kiichi I, Nishio I (1992) J Chem Phys 97:3808–381410.1063/1.462962 ↗
39. Ulrich DR (1990) Chem Eng News 68:28–4010.1021/cen-v068n001.p028 ↗
40. Sheppart LM (1989) Ceram Bull 68:980–985
41. Rhodes WH (1981) J Am Ceram Soc 64:19–2210.1111/j.1151-2916.1981.tb09552.x ↗
42. Lange FF (1989) J Am Ceram Soc 72:3–1510.1111/j.1151-2916.1989.tb05945.x ↗
43. Coble RL, Kingery WD (1956) J Am Ceram Soc 39:377–38510.1111/j.1151-2916.1956.tb15608.x ↗