Preparation of titanium carbide powders by sol–gel and microwave carbothermal reduction methods at low temperature
Source abstract
Abstract
Titanium carbide ultrafine powders were prepared from tetrabutyl titanate and sucrose by sol–gel and microwave carbothermal reduction. The influences of reaction temperature and molar ratio of Ti to C on the synthesis of titanium carbide were studied. The results show that excess amount of carbon plays a positive effect on the carbothermal reduction of TiO2 at low temperature. The inceptive carbothermal reduction temperature of TiO2 and formation of titanium oxycarbide was below 900 °C, and pure TiC can be prepared at 1,200 °C, which was considerably lower compared to that by conventional carbothermal reduction using a mixture of TiO2 and carbon powders as raw materials. The morphology and particle size of synthesized TiC powder were examined by field emission-scanning electron microscopy (FE-SEM) and the quantities of the phases of the powders were analyzed by Rietveld refinement method, the particle sizes of the TiC powders synthesized at 1,300 °C distribute over 0.1–0.5 μm.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Gotoha Y, Fujimura K, Koike M, Ohkoshi Y, Nagura M, Akamatsu K, Deki S (2001) Synthesis of titanium carbide from a composite of TiO2 nanoparticles/methyl cellulose by carbothermal reduction. Mater Res Bull 36:2263–227510.1016/S0025-5408(01)00713-9 ↗
2. Toth LE (1971) Transition metal carbides and nitrides. Academic Press, New York
3. Pierson HO (1996) Handbook of refractory carbides and nitrides. Noyes Publications, Westwood
4. Li YL, Takamasa I (2003) Incongruent vaporization of titanium carbide in thermal plasma. Mater Sci Eng A 345:301–30810.1016/S0921-5093(02)00506-3 ↗
5. Lee DW, Alexandrovskii SV, Kim BK (2004) Novel synthesis of substoichiometric ultrafine titanium carbide. Mater Lett 58:1471–147410.1016/j.matlet.2003.10.011 ↗
6. Kim YJ, Chung H, Kang SJL (2001) In situ formation of titanium carbide in titanium powder compacts by gas-solid reaction. Composite A 32:731–73810.1016/S1359-835X(99)00092-5 ↗
7. Durlu N (1999) Titanium carbide based composites for high temperature applications. J Eur Ceram Soc 19:2415–241910.1016/S0955-2219(99)00101-6 ↗
8. Ettmayer P, Kolaska H, Lengauer W, Dreyer K (1995) Ti(C,N) cermets—metallurgy and properties. Int J Refract Mater 13:343–35110.1016/0263-4368(95)00027-G ↗
9. Tjong SC, Ma ZY (2000) Microstructural and mechanical characteristics of in situ metal matrix composites. Mater Sci Eng R 29:49–11310.1016/S0927-796X(00)00024-3 ↗
10. Tong L, Reddy RG (2005) Synthesis of titanium carbide nano-powders by thermal plasma. Scripta Mater 52:1253–125810.1016/j.scriptamat.2005.02.033 ↗
11. Cochepin B, Gauthier V, Vrel D, Dubois S (2007) Crystal growth of TiC grains during SHS reactions. J Cryst Growth 304:481–48610.1016/j.jcrysgro.2007.02.018 ↗
12. Lee DW, Kim BK (2003) Synthesis of nano-structured titanium carbide by Mg-thermal reduction. Scripta Mater 48:1513–151810.1016/S1359-6462(03)00130-1 ↗
13. Khina BB, Formanek B, Solpan I (2005) Limits of applicability of the “diffusion-controlled product growth” kinetic approach to modeling SHS. Physica B 355:14–3110.1016/j.physb.2004.09.104 ↗
14. Preiss H, Berger LM, Schultze D (1999) Studies on the carbothermal preparation of titanium carbide from different gel precursors. J Eur Ceram Soc 19:195–20610.1016/S0955-2219(98)00190-3 ↗
15. Koc R (1997) Kinetics and phase evolution during carbothermal synthesis of titanium carbide from carbon-coated titania powder. J Eur Ceram Soc 17:1309–131510.1016/S0955-2219(96)00241-5 ↗
16. Lefort P, Maitre A, Tristant P (2000) Influence of the grain size on the reactivity of TiO2/C mixtures. J Alloy Compd 302(1–2):287–29810.1016/S0925-8388(00)00683-6 ↗
17. Kaga H, Koc R (2007) Formation of Al2O3-TiC composite nano-particles synthesized from carbon-coated precursors. J Am Ceram Soc 90:407–41110.1111/j.1551-2916.2006.01420.x ↗
18. Hasegawa I, Nakamura T, Kajiwara M (1996) Synthesis of continuous silicon carbide-titanium carbide hybrid fibres through sol–gel processing. Mater Res Bull 31(7):869–87510.1016/0025-5408(96)00063-3 ↗
19. Koc R, Folmer JS (1997) Carbothermal synthesis of titanium carbide using ultrafine titania powders. J Mater Sci 32:3101–311110.1023/A:1018634214088 ↗
20. Preiss H, Schierhorn E, Brzezinka KW (1998) Synthesis of polymeric titanium and zirconium precursors and preparation of carbide fibres and films. J Mater Sci 33:4697–470610.1023/A:1004428818457 ↗
21. Tristant P, Lefort P (1993) kinetic approach to carbothermic reduction of titania. J Alloy Compd 196:137–14410.1016/0925-8388(93)90584-A ↗
22. Koc R (1998) Kinetics and phase evolution during carbothermal synthesis of titanium carbide from ultrafine titania/carbon mixture. J Mater Sci 33:1049–105510.1023/A:1004332416351 ↗