journal article·2017-03Open access

Removal of lead(II), copper(II), cobalt(II) and nickel(II) ions from aqueous solutions using carbon gels

Małgorzata Osińska

Abstract

The carbon gel and carbon gel doped with 0.5, 1 and 2 wt% of graphite intercalation compound were used for the removal of heavy metals from aqueous solutions. These materials were prepared by a sol-gel process that involves a polycondensation of resorcinol and formaldehyde. Nitrogen adsorption, scanning electron microscopy, energy dispersive spectroscopy and fourier transform infrared spectroscopy were used for a morpho-structural adsorbent investigation. In the present paper, Cu, Co, Pb and Ni ions adsorption experiments were carried out in batch conditions under magnetic stirring. The effect of some parameters such as contact time, metal ions’ concentration and pH were examined. Adsorption data on all sorbents, followed both the Frendlich and Langmuir models. The data better fitted the Langmuir isotherm than the Frendlich one. The highest degree of removal was achieved for Pb ions at the initial concentration of 10 mg/l and for 2 g/l adsorbent dose. Adsorption results expressed as adsorption capacities showed that carbon gel doped with 2 wt% of graphite intercalation compound is the best adsorbent.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Adsorption and biosorption for pollutant removal · Supercapacitor Materials and Fabrication · Aerogels and thermal insulation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Yang B, Yu C, Yu Q, Zhang X, Li Z, Lei L (2015) N-doped carbon xerogels as adsorbents for the removal of heavy metal ions from aqueous solution. RSC Adv 5:7182–719110.1039/C4RA12441C ↗
2. Skowroński JM, Osińska M (2009) Hydrogen electrosorption on the carbon-metal composite electrodes. Przem Chem 88(4):385–388
3. Skowroński JM, Osińska M (2012) Effect of nickel catalyst on physicochemical properties of carbon xerogels as electrode materials for supercapacitor. Curr Appl Phys 12:911–91810.1016/j.cap.2011.12.009 ↗
4. Osińska M (2016) The effect of catalyst and heat treatment on the properties of carbon-metal composites. J Porous Mater 23:365–37310.1007/s10934-015-0089-4 ↗
5. Pekala RW (1989) Organic aerogels from the polycondensation of resorcinol with formaldehyde. J Mater Sci 24:3221–322710.1007/BF01139044 ↗
6. Pröbstle H, Wiener M, Fricke J (2003) Carbon aerogels for electrochemical double layer capacitors. J Porous Mater 10:213–22210.1023/B:JOPO.0000011381.74052.77 ↗
7. Wu D, Fu R, Zhang S, Dresselhaus MS, Dresselhaus G (2004) Preparation of low-density carbon aerogels by ambient pressure drying. Carbon N Y 42:2033–203910.1016/j.carbon.2004.04.003 ↗
8. Kim SJ, Hwang SW, Hyun SH (2005) Preparation of carbon aerogel electrodes for supercapacitors and their electrochemical characteristics. J Mater Sci 40:725–73110.1007/s10853-005-6313-x ↗
9. Jung HH, Hwang SW, Hyun SH, Lee KH, Kim GT (2007) Capacitive deionization charactristics of nanostructured carbon aerogel electrodes synthesized via ambient drying. Desalination 216:377–38510.1016/j.desal.2006.11.023 ↗
10. Lee YJ, Jung JC, Yi J, Baeck SH, Yoon JR, Song IK (2010) Preparation of carbon aerogel in ambient conditions for electrical double-layer capacitor. Curr Appl Phys 10:682–68610.1016/j.cap.2009.08.017 ↗
11. Tamon H, Ishizaka H, Yamamoto T, Suzuki T (2000) Influence of freeze-drying conditions on the mesoporosity of organic gels as carbon precursors. Carbon N Y 38:1099–110510.1016/S0008-6223(99)00235-3 ↗
12. Moreno AH, Arenillas A, Calvo EG, Bermúdez JM, Menéndez JA (2013) Carbonisation of resorcinol-formaldehyde organic xerogels: Effect of temperature, particle size and heating rate on the porosity of carbon xerogels. J Anal Appl Pyrolysis 100:111–11610.1016/j.jaap.2012.12.004 ↗
13. Skowroński JM, Osińska M (2014) The influence of thermal treatment on the electrochemical properties of carbon–Ni–Pd composites. J Sol-Gel Sci Technol 71:109–11710.1007/s10971-014-3338-0 ↗
14. Chandra S, Bag S, Bhar R, Pramanik P (2011) Effect of transition and non-transition metals during the synthesis of carbon xerogels. Microporous Mesoporous Mater 138:149–15610.1016/j.micromeso.2010.09.012 ↗
15. Fort CI, Cotet LC, Danciu V, Turdean GL, Popescu IC (2013) Iron doped carbon aerogel–new electrode material for electrocatalytic reduction of H2O2. Mater Chem Phys 138:893–89810.1016/j.matchemphys.2012.12.079 ↗
16. Meena AK, Mishra GK, Rai PK, Rajagopal C, Nagar PN (2005) Removal of heavy metal ions from aqueous solutions using carbon aerogels as an adsorbent. J Hazard Mater B 122:161–17010.1016/j.jhazmat.2005.03.024 ↗
17. Goel J, Kadirvelu K, Rajagopal C, Garg VK (2005) Investigation of lead, mercury and nickel from aqueous solutions onto carbon aerogel. J Chem Technol Biotechnol 80:469–47610.1002/jctb.1212 ↗
18. Kadirvelu K, Goel J, Rajagopal C (2008) Sorption of lead, mercury and cadmium ions in multi-component system using carbon aerogel as adsorbent. J Hazard Mater 153:502–50710.1016/j.jhazmat.2007.08.082 ↗
19. Girigs BS, El-Sherif IY, Attia AA, Fathy NA (2012) Textural adsorption of carbon xerogel adsorbents for removal of Cu(II) ions from aqueous solution. J Non-Cryst Solids 358:741–74710.1016/j.jnoncrysol.2011.12.004 ↗
20. Zhao M, Liu P (2009) Adsorption of methylene blue from aqueous solutions by modified expanded graphite powder. Desalination 249:331–33610.1016/j.desal.2009.01.037 ↗
21. Goshadrou A, Moheb A (2011) Continuous fixed bed adsorption of C.I. Acid Blue 92 by exfoliated graphite: An experimental and modeling study. Desalination 269:170–17610.1016/j.desal.2010.10.058 ↗
22. Tryba B, Przepiórski J, Morawski AW (2003) Influence of chemically prepared H2SO4-graphite intercalation compound (GIC) precursor on parameters of exfoliated graphite (EG) for oil sorption from water. Carbon N Y 41:2013–201610.1016/S0008-6223(03)00200-8 ↗
23. Vieira F, Cisneros I, Rosa NG, Trindade GM, Mohallem NDS (2006) Influence of the natural flake graphite particle size on the textural characteristic of exfoliated graphite used for heavy oil sorption. Carbon N Y 44:2582–259210.1016/j.carbon.2006.05.043 ↗
24. Takeuchi K, Fujishige M, Kitazawa H, Akuzawa N, Medina JO, Morelos-Gomez A, Cruz-Silva R, Araki T, Hayashi T, Terrones M, Endo M (2015) Oil sorption by exfoliated graphite from dilute oil-water emulsion for practical applications in produced water treatments. J Water Process Eng 8:91–9810.1016/j.jwpe.2015.09.002 ↗
25. Lutfullin MA, Shornikova ON, Vasiliev AV, Pokholok KV, Osadchaya VA, Saidaminov MI, Sorokina NE, Avdeev VV (2014) Petroleum products and water sorption by expanded graphite enhanced with magnetic iron phases. Carbon N Y 66:417–42510.1016/j.carbon.2013.09.017 ↗
26. Seredych M, Tamashausky AV, Bandosz TJ (2008) Surface features of exfoliated graphite/bentonite composites and their importance for ammonia adsorption. Carbon N Y 46:1241–125210.1016/j.carbon.2008.05.004 ↗
27. Toyoda M, Inagaki M (2003) Sorption and Recovery of Heavy Oils by Using Exfoliated Graphite. Spill Sci Technol Bull 8:467–47410.1016/S1353-2561(03)00131-2 ↗
28. Osińska M (2015) Modification of carbon-metal composites using high-energy ball milling. Microporous Mesoporous Mater 214:95–10010.1016/j.micromeso.2015.04.040 ↗
29. Boehm HP, Diehl E, Heck W, Sappok R (1964) Surface oxides of carbon. Angew Chem 3:669–67710.1002/anie.196406691 ↗
30. Kaźmierczak J, Nowicki P, Pietrzak R (2013) Sorption properties of activated carbons obtained from corn cobs by chemical and physical activation. Adsorption 19:273–28110.1007/s10450-012-9450-y ↗
31. Świątkowski A, Pakuła M, Biniak S, Walczyk M (2004) Influence of surface chemistry of modified activated carbon on its electrochemical behaviour in the presence of lead(II) ions. Carbon N Y 42:3057–306910.1016/j.carbon.2004.06.043 ↗
32. Biniak S, Świątkowski A, Pakuła M (2000) Electrochemical studies of phenomena at active carbon-electrolyte solution interfaces. In: Radovic LR (ed) Chemistry and physics of carbon, dekker, Basel, New York, NY10.1002/chin.200117228 ↗
33. Puizy AM, Poddubnaya OI, Martínez-Alonso A, Suárez-García F, Tascón JMD (2005) Surface chemistry of porous-containing carbons of lignocellulosic origin. Carbon N Y 43:2857–286810.1016/j.carbon.2005.06.014 ↗
34. Suárez-García F, Martínez-Alonso A, Tascón JMD (2002) A comparative study of the thermal decomposition of apple pulp in the absence and presence of phosphoric acid. Polym Degrad Stab 75:375–38310.1016/S0141-3910(01)00243-9 ↗
35. Trick KA, Saliba TE (1995) Mechanisms of the phyrolysis of phenolic resin in a carbon/phenolic composite. Carbon N Y 33:1509–151510.1016/0008-6223(95)00092-R ↗
36. Severini F, Formaro L, Pegoraro M, Posca L (2002) Chemical modification of carbon fiber surfaces. Carbon N Y 40:735–74110.1016/S0008-6223(01)00180-4 ↗
37. Retzko I, Fredrich JF, Lippitz A, Unger WES (2001) Chemical analysis of plasma-polymerized films: The application of X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (NEXAFS) and fourier transform infrared spectroscopy (FTIR). J Electron Spectrosc Relat Phenom 121:111–11910.1016/S0368-2048(01)00330-9 ↗
38. Zhang L, Liu H, Wang M, Chen L (2007) Structure and electrochemical properties of resorcinol-formaldehyde polymer-based carbon for electric double-layer capacitors. Carbon N Y 45:439–1445
39. Park SH, McClain S, Tian ZR, Suib SL, Karwacki C (1997) Surface and bulk measurements of metals deposited on activated carbon. Chem Mater 9:176–18310.1021/cm9602712 ↗
40. Ücer A, Uyaniak A, Ayün SF (2006) Adsorption of Cu(II), Cd(II), Zn(II), Mn(II) and Fe(III) ions by tannic acid immobilized activated carbon. Sep Purif Technol 47:113–11810.1016/j.seppur.2005.06.012 ↗
41. Lo SF, Wang SY, Tsai MJ, Lin LD (2012) Adsoorpton capacity and removal efficiency of heavy metal ions by Moso and Ma bamboo activated carbons. Chem Eng Res Des 90:1397–140610.1016/j.cherd.2011.11.020 ↗
42. Bohli T, Villaescusa I, Ouederni A (2013) Comparative study of bivalent cationic metals adsorption Pb(II), Cd(II), Ni(II),and Cu(II) on olive stones chemically activated carbon. J Chem Eng Process Technol 4:158–16410.4172/2157-7048.1000158 ↗
43. Kardivelu K, Faur-Brasquet C, Le Cloirec P (2000) Removal of Cu(II), Pb(II) and Ni(II) by adsorption onto activated carbon cloths. Langmuir 16:8404–840910.1021/la0004810 ↗
44. Sharma A, Bhattacharyya KG (2004) Adsorption of chromium(VI) on Azadirachta indica (neem) leaf powder. Adsorption 10:327–33810.1007/s10450-005-4818-x ↗
45. Weber TW, Chakravorti RK (1974) Pore and solid diffusion models for fixed-bed adsorbers. J Am Inst Chem Eng 20:228–23810.1002/aic.690200204 ↗
46. Faur-Brasquet C, Kardivelu K, Le Cloirec P (2002) Removal of metal ions from aqueous solution by absorption onto activated carbon cloth: adsorption competition with organic matter. Carbon N Y 40:2387–239210.1016/S0008-6223(02)00117-3 ↗
47. Person I (2010) Hydrated metal ions in aqueous solution: how regular are their structures? Pure Appl Chem 82/10:1901–191710.1351/PAC-CON-09-10-22 ↗
48. Faur-Brasquet C, Kardivelu K, Le Cloirec P (2002) Modeling the adsorption of metal ions (Cu2+, Ni2+, Pb2+) onto ACCs using surface complexion models. Appl Surf Sci 196:356–366510.1016/S0169-4332(02)00073-9 ↗
49. Ricordel S, Taha S, Cisse I, Dorange G (2005) Heavy metals removal by adsorption onto peanut husks carbon: characterization, kinetic study and modeling. Sep Purif Technol 24:389–40110.1016/S1383-5866(01)00139-3 ↗
50. Gao Z, Bandosz TJ, Han M, Qiu J (2009) Investigation of factors affecting adsorption of transition metals on oxidized carbon nanotubes. J Hazard Mater 167:357–36510.1016/j.jhazmat.2009.01.050 ↗
51. Fiol N, Villaescusa I, Martinez M, Miralles N, Poch J (2006) Sorption of Pb(II), Ni(II), Cu(II) and Cd(II) from aqueous solution by olive stone waste. Sep Purif Technol 50:132–14010.1016/j.seppur.2005.11.016 ↗
52. Machida M, Yanazaki R, Aikawa M, Tatshumoto H (2005) Role of minerals in carbonaceous adsorbents for removal of Pb(II) ions from aqueous solution. Sep Purif Technol 46:88–9410.1016/j.seppur.2005.04.015 ↗