Efficient adsorption of Levofloxacin from aqueous solution using calcium alginate/metal organic frameworks composite beads
Source abstract
Abstract
As a typical metal–organic framework material, UiO-66 has good potential for removing pharmaceuticals and personal care products from water. However, the application of this powdery adsorbent has been limited by the difficult recovery from the liquid. To overcome this weakness, we prepared composite beads constituted by sodium alginate and UiO-66 by solidification in CaCl2 solution. The material was characterized by SEM, FTIR, XRD, BET, and TGA methods. These composite beads were applied to remove a common antibiotic Levofloxacin (LOFX) from water, and the experimental parameters (i.e., initial LOFX concentration, adsorption time, pH, and adsorbent dose) were optimized. The adsorption data could be satisfactorily fitted to the Langmuir isotherm model (R2 = 0.9871) and the pseudo-second-order kinetic model (R2 = 0.9990). The regeneration experiment of the composite beads revealed that the adsorption efficiency of levofloxacin was higher than 70% even after 5 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal-Organic Frameworks: Synthesis and Applications · Covalent Organic Framework Applications · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Ort C, Lawrence MG, Reungoat J, Mueller JF (2010) Sampling for PPCPs in wastewater systems: comparison of different sampling modes and optimization strategies. Environ Sci Technol 44(16):6289–6296. https://doi.org/10.1021/es100778d10.1021/es100778d ↗
2. Wei X, Joneja A (2014) Microextraction techniques coupled to liquid chromatography with mass spectrometry for the determination of organic micropollutants in environmental water samples. Molecules 19(7):10320. https://doi.org/10.1016/j.cad.2013.11.00110.1016/j.cad.2013.11.001 ↗
3. Yang X, Flowers RC, Weinberg HS, Singer PC (2011) Occurrence and removal of pharmaceuticals and personal care products (PPCPs) in an advanced wastewater reclamation plant. Water Res 45(16):5218. https://doi.org/10.1016/j.watres.2011.07.02610.1016/j.watres.2011.07.026 ↗
4. Rosi-Marshall EJ, Snow D, Bartelt-Hunt SL, Paspalof A, Tank JL (2015) A review of ecological effects and environmental fate of illicit drugs in aquatic ecosystems. J Hazard Mater 282:18. https://doi.org/10.1016/j.jhazmat.2014.06.06210.1016/j.jhazmat.2014.06.062 ↗
5. Wang J, Wang S (2016) Removal of pharmaceuticals and personal care products (PPCPs) from wastewater: a review. J Environ Manage 182:620–640. https://doi.org/10.1016/j.jenvman.2016.07.04910.1016/j.jenvman.2016.07.049 ↗
6. Hu ZH, Wang YF, Omer AM, Ouyang XK (2017) Fabrication of ofloxacin imprinted polymer on the surface of magnetic carboxylated cellulose nanocrystals for highly selective adsorption of fluoroquinolones from water. Int J Biol Macromol 107(Pt A):453–462. https://doi.org/10.1016/j.ijbiomac.2017.09.00910.1016/j.ijbiomac.2017.09.009 ↗
7. Li S, Zhang X, Huang Y (2017) Zeolitic imidazolate framework-8 derived nanoporous carbon as an effective and recyclable adsorbent for removal of ciprofloxacin antibiotics from water. J Hazard Mater 321:711–719. https://doi.org/10.1016/j.jhazmat.2016.09.06510.1016/j.jhazmat.2016.09.065 ↗
8. Hasan Z, Choi EJ, Jhung SH (2013) Adsorption of naproxen and clofibric acid over a metal–organic framework MIL-101 functionalized with acidic and basic groups. Chem Eng J 219(3):537–544. https://doi.org/10.1016/j.cej.2013.01.00210.1016/j.cej.2013.01.002 ↗
9. Cavka JH, Jakobsen S, Olsbye U, Guillou N, Lamberti C, Bordiga S et al. (2008) A new zirconium inorganic building brick forming metal organic frameworks with exceptional stability. J Am Chem Soc 130(42):13850–13851. https://doi.org/10.1021/ja805795310.1021/ja8057953 ↗
10. Huang Y, Qin W, Li Z, Li Y (2012) Enhanced stability and CO2 affinity of a UiO-66 type metal-organic framework decorated with dimethyl groups. Dalton T 41(31):9283–9285. https://doi.org/10.1039/c2dt30950e10.1039/c2dt30950e ↗
11. Jasuja H, Walton KS (2013) Experimental study of CO2, CH4, and water vapor adsorption on a dimethyl-functionalized UiO-66 framework. J Phys Chem C 117(14):7062–7068. https://doi.org/10.1021/jp311857e10.1021/jp311857e ↗
12. Jia Y, Su H, Wong YLE, Chen X, Chan TWD (2016) Thermo-responsive polymer tethered metal-organic framework core-shell magnetic microspheres for magnetic solid-phase extraction of alkylphenols from environmental water samples. J Chromatogr A 1456:42–48. https://doi.org/10.1016/j.chroma.2016.06.00410.1016/j.chroma.2016.06.004 ↗
13. Hasan Z, Khan NA, Jhung SH (2016) Adsorptive removal of diclofenac sodium from water with Zr-based metal–organic frameworks. Chem Eng J 284:1406–1413. https://doi.org/10.1016/j.cej.2015.08.08710.1016/j.cej.2015.08.087 ↗
14. Egorov O, O'Hara MJ, Grate JW, Ruzicka J (2015) Sequential injection renewable separation column instrument for automated sorbent extraction separations of radionuclides. Anal Chem 71(2):345–352. https://doi.org/10.1021/ac980623j10.1021/ac980623j ↗
15. Zhou W, Huang H, Du S, Huo Y, He J, Cui S (2015) Removal of copper ions from aqueous solution by adsorption onto novel polyelectrolyte film-coated nanofibrous silk fibroin non-wovens. Appl Surf Sci 345:169–174. https://doi.org/10.1016/j.apsusc.2015.03.03610.1016/j.apsusc.2015.03.036 ↗
16. Michel G, Tonon T, Scornet D, Cock JM, Kloareg B (2010) The cell wall polysaccharide metabolism of the brown alga Ectocarpus siliculosus. Insights into the evolution of extracellular matrix polysaccharides in Eukaryotes. New Phytol 188(1):82. https://doi.org/10.1016/j.critrevonc.2004.11.00310.1016/j.critrevonc.2004.11.003 ↗
17. Chan L, Jin Y, Heng P (2002) Cross-linking mechanisms of calcium and zinc in production of alginate microspheres. Int J Pharm 242(2):255–258. https://doi.org/10.1016/S0378-5173(02)00169-210.1016/S0378-5173(02)00169-2 ↗
18. Sinha P, Ubaidulla U, Hasnain MS, Nayak AK, Rama B (2015) Alginate-okra gum blend beads of diclofenac sodium from aqueous template using ZnSO4 as a cross-linker. Int J Biol Macromol 79:555. https://doi.org/10.1016/j.ijbiomac.2015.04.06710.1016/j.ijbiomac.2015.04.067 ↗
19. Cuadros TR, Skurtys O, Aguilera JM (2012) Mechanical properties of calcium alginate fibers produced with a microfluidic device. Carbohydr Polym 89(4):1198. https://doi.org/10.1016/j.carbpol.2012.03.09410.1016/j.carbpol.2012.03.094 ↗
20. Sugiura S, Oda T, Izumida Y, Aoyagi Y, Satake M, Ochiai A et al. (2005) Size control of calcium alginate beads containing living cells using micro-nozzle array. Biomaterials 26(16):3327. https://doi.org/10.1016/j.biomaterials.2004.08.02910.1016/j.biomaterials.2004.08.029 ↗
21. Lu T, Xiang T, Huang XL, Li C, Zhao WF, Zhang Q et al. (2015) Post-crosslinking towards stimuli-responsive sodium alginate beads for the removal of dye and heavy metals. Carbohydr Polym 133:587. https://doi.org/10.1016/j.carbpol.2015.07.04810.1016/j.carbpol.2015.07.048 ↗
22. Wang N, Ouyang XK, Yang LY (2017a) Fabrication of a magnetic cellulose nanocrystal/metal-organic framework composite for removal of Pb(II) from water. ACS Sustainable Chem Eng 5(11):10447–10458. https://doi.org/10.1021/acssuschemeng.7b0247210.1021/acssuschemeng.7b02472 ↗
23. Yang CH, Shih MC, Chiu HC, Huang KS (2014) Magnetic Pycnoporus sanguineus-loaded alginate composite beads for removing dye from aqueous solutions. Molecules 19(6):8276–8288. https://doi.org/10.3390/molecules1906827610.3390/molecules19068276 ↗
24. Zhuo N, Lan Y, Yang W, Yang Z, Li X, Zhou X et al. (2016) Adsorption of three selected pharmaceuticals and personal care products (PPCPs) onto MIL-101(Cr)/natural polymer composite beads. Sep Purif Technol 177:272–280. https://doi.org/10.1016/j.seppur.2016.12.04110.1016/j.seppur.2016.12.041 ↗
25. Abid HR, Ang HM, Wang S (2012) Effects of ammonium hydroxide on the structure and gas adsorption of nanosized Zr-MOFs (UiO-66). Nanoscale 4(10):3089–3094. https://doi.org/10.1039/c2nr30244f10.1039/c2nr30244f ↗
26. Lozano LA, Iglesias CM, Faroldi BMC, Ulla MA, Zamaro JM (2018) Efficient solvothermal synthesis of highly porous UiO-66 nanocrystals in dimethylformamide-free media. J Mater 53(3):1862–1873. https://doi.org/10.1007/s10853-017-1658-510.1007/s10853-017-1658-5 ↗
27. Deng M, Lin S, Bo X, Guo L (2017) Simultaneous and sensitive electrochemical detection of dihydroxybenzene isomers with UiO-66 metal-organic framework/mesoporous carbon. Talanta 174:527. https://doi.org/10.1016/j.talanta.2017.06.06110.1016/j.talanta.2017.06.061 ↗
28. Valenzano L, Civalleri B, Chavan S, Bordiga S, Nilsen MH, Jakobsen S et al. (2011) Disclosing the complex structure of UiO-66 metal organic framework: a synergic combination of experiment and theory. Chem Mater 23(7):1700–1718. https://doi.org/10.1021/cm102288210.1021/cm1022882 ↗
29. Chen Q, He Q, Lv M, Xu Y, Yang H, Liu X et al. (2015) Selective adsorption of cationic dyes by UiO-66-NH2. Appl Surf Sci 327:77–85. https://doi.org/10.1016/j.apsusc.2014.11.10310.1016/j.apsusc.2014.11.103 ↗
30. Rownaghi AA, Rezaei F, Hedlund J (2011) Yield of gasoline-range hydrocarbons as a function of uniform ZSM-5 crystal size. Catalysis Commun 14(1):37–41. https://doi.org/10.1016/j.catcom.2011.07.01510.1016/j.catcom.2011.07.015 ↗
31. Ho YS, Ofomaja AE (2006) Pseudo-second-order model for lead ion sorption from aqueous solutions onto palm kernel fiber. J Hazard Mater 129(1–3):137–142. https://doi.org/10.1016/j.jhazmat.2005.08.02010.1016/j.jhazmat.2005.08.020 ↗
32. Jin S, Sen A, Sandvik AW (2012) Ashkin-Teller criticality and pseudo-first-order behavior in a frustrated ising model on the square lattice. Phys Rev Lett 108(4). https://doi.org/10.1103/PhysRevLett.108.045702 .10.1103/PhysRevLett.108.045702 ↗
33. El-Khaiary MI, Malash GF, Ho YS (2010) On the use of linearized pseudo-second-order kinetic equations for modeling adsorption systems. Desalination 257(1):93–101. https://doi.org/10.1016/j.desal.2010.02.04110.1016/j.desal.2010.02.041 ↗
34. Bhattacharyya KG, Gupta SS (2007) Adsorptive accumulation of Cd(II), Co(II), Cu(II), Pb(II), and Ni(II) from water on montmorillonite: influence of acid activation. J Colloid Interface Sci 310(2):411. https://doi.org/10.1016/j.jcis.2007.01.08010.1016/j.jcis.2007.01.080 ↗
35. Jeppu GP, Clement TP (2012) A modified Langmuir-Freundlich isotherm model for simulating pH-dependent adsorption effects. J Contam Hydrol 129–130(3):46–53. https://doi.org/10.1016/j.jconhyd.2011.12.00110.1016/j.jconhyd.2011.12.001 ↗
36. Wu FC, Tseng RL, Juang RS (2010) A review and experimental verification of using chitosan and its derivatives as adsorbents for selected heavy metals. J Environ Manage 91(4):798. https://doi.org/10.1016/j.jenvman.2009.10.01810.1016/j.jenvman.2009.10.018 ↗
37. Ely A, Baudu M, Basly JP (2009) Copper and nitrophenol pollutants removal by Na-montmorillonite/alginate microcapsules. J Hazard Mater 171(1):405–409. https://doi.org/10.1016/j.jhazmat.2009.06.01510.1016/j.jhazmat.2009.06.015 ↗
38. Wu S, Zhao X, Li Y, Zhao C, Du Q, Sun J et al. (2013) Adsorption of ciprofloxacin onto biocomposite fibers of graphene oxide/calcium alginate. Chem Eng J 230((1)):389–395. https://doi.org/10.1016/j.cej.2013.06.07210.1016/j.cej.2013.06.072 ↗
39. Shi S, Fan Y, Huang Y (2013) Facile low temperature hydrothermal synthesis of magnetic mesoporous carbon nanocomposite for adsorption removal of ciprofloxacin antibiotics. Ind Eng Chem Res 52((7)):2604–2612. https://doi.org/10.1021/ie303036e10.1021/ie303036e ↗
40. Wang N, Wang YF, Omer AM, Ouyang XK (2017b) Fabrication of novel surface-imprinted magnetic graphene oxide-grafted cellulose nanocrystals for selective extraction and fast adsorption of fluoroquinolones from water. Anal Bioanal Chem 409(28):6643–6653. https://doi.org/10.1007/s00216-017-0619-910.1007/s00216-017-0619-9 ↗
41. Tang Y, Guo H, Xiao L, Yu S, Gao N, Wang Y (2013) Synthesis of reduced graphene oxide/magnetite composites and investigation of their adsorption performance of fluoroquinolone antibiotics. Colloids Surf A 424(17):74–80. https://doi.org/10.1016/j.colsurfa.2013.02.03010.1016/j.colsurfa.2013.02.030 ↗