Comparison of crystal structure and thermoelectric properties in Ba8CuxSi46-x clathrate compounds synthesized by the Czochralski method and spark plasma sintering
Source abstract
Abstract
In this study, Ba8CuxSi46-x clathrate samples synthesized by the Czochralski (CZ) method and the spark plasma sintering (SPS) technique were compared to evaluate how the synthesis process influences the structure, electrical transport properties, and power factor. Based on the XRD patterns, it was confirmed that both samples exhibited the characteristic clathrate crystal structure. In contrast, BSE and SEM observations revealed that the CZ-grown sample consisted of a homogeneous clathrate phase (Ba8Cu4Si42), whereas the SPS sample also contained Ba-rich secondary phases along with numerous cracks and voids. Additionally, EBSD analysis confirmed that the CZ sample had substantially larger crystal grains than the SPS sample, with grain size exceeding 50 μm within the observed area. Thermoelectric characterization indicated that the CZ-grown and SPS samples showed closely similar Seebeck coefficients (−49.9 μV K−1 and -46.1 μV K−1 at 550 °C, respectively). In contrast, the electrical resistivity of the CZ sample was significantly lower (0.56 mΩ cm) than that of the SPS sample (1.80 mΩ cm), which can be attributed to reduced grain boundary scattering. Consequently, the power factor of the CZ sample reached up to 4.33 μWcm−1K−2, which was 3.7 times higher than that of the SPS sample (1.17 μWcm−1K−2) at 550 °C. The PF value of Ba–Cu–Si clathrate synthesized by the CZ method in this study did not reach the practical benchmark of 10 μWcm−1K−2. Nevertheless, these results suggest that the CZ method is considered a promising approach for improving the thermoelectric performance of clathrate compounds.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Semiconductor materials and interfaces · Rare-earth and actinide compounds
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Estimating the global waste heat potential10.1016/j.rser.2015.12.192 ↗
2. Design a high-performance thermoelectric generator by analyzing industrial heat transfer10.1016/j.apenergy.2023.121403 ↗
3. Recent trends and future perspectives of thermoelectric materials and their applications10.1039/D4RA03625E ↗
4. Thermoelectric properties of BiTe10.1088/1742-6596/1428/1/012007 ↗
5. Design, growth and characterization of PbTe-based thermoelectric materials10.1016/j.pcrysgrow.2019.04.001 ↗
6. High temperature Si-Ge alloy towards thermoelectric applications: a comprehensive review
7. Effect of HPHT processing on structural and thermoelectric properties of low-cost type-I clathrate Ba8Cu6Si4010.1021/acs.jpcc.0c02045 ↗
8. Earth abundant element type I clathrate phases10.3390/ma9090714 ↗
9. High temperature thermoelectric properties of the type-I clathrate Ba8AuxSi46−x10.1063/1.3682585 ↗
10. Tuning thermoelectric properties of type I clathrate. K8−xBaxAl8+xSi38−x through barium substitution10.1021/acs.chemmater.6b00566 ↗
11. Are type-I clathrates Zintl phases and ‘phonon glasses and electron single crystals’10.1016/S0921-4526(02)01805-7 ↗
12. Size effect on the thermal conductivity of a type-I clathrate10.3390/cryst13030453 ↗
13. Crystal chemistry and thermoelectric properties of type-I clathrate Ba8Ni∼3.8SixGe42.2-x (x = 0, 10, 20, 42.2)10.3390/ma11060946 ↗
14. Metallic n-Type Mg3Sb2 single crystals demonstrate the absence of ionized impurity scattering and enhanced thermoelectric performance10.1002/adma.201908218 ↗
15. Single-crystalline Mg3Sb2-xBix-based thermoelectric materials
16. Gallium composition dependence of crystallographic and thermoelectric properties in polycrystalline type-I Ba8GaxSi46−x (nominal x=14–18) clathrates prepared by combining arc melting and spark plasma sintering methods10.1016/j.jssc.2012.03.069 ↗
17. Influence of hot pressing temperature on thermoelectric properties of type-I clathrates10.1002/pssa.201300195 ↗
18. Growth and transport properties of Mg3X2 (X = Sb, Bi) single crystals10.1016/j.mtphys.2018.11.004 ↗
19. Enhancement of average thermoelectric figure of merit by increasing the grain-size of Mg3.2Sb1.5Bi0.49Te0.0110.1063/1.5016488 ↗
20. Impact of rattlers on thermal conductivity of a thermoelectric clathrate: a first-principles study10.1103/PhysRevLett.114.095501 ↗
21. Filled skutterudite antimonides: electron crystals and phonon glasses10.1103/PhysRevB.56.15081 ↗
22. Structure and thermoelectric characterization of AxBa8-xAl14Si31 (A = Sr, Eu) single crystals10.1021/ic062115v ↗
23. Advanced czochralski single silicon crystal growth
24. On the Czochralski growth of SixGe1−x crystals as substrates for strained Ge quantum well heterostructures10.1063/5.0238533 ↗
25. Growth of semi-insulating GaAs crystals in low temperature gradients by using the vapour pressure controlled czochralski method (VCz)10.1016/S0960-8974(01)00005-5 ↗
26. Gallium composition dependence of crystallographic and thermoelectric properties in polycrystalline type-I Ba8GaxSi46−x (nominal x=14–18) clathrates prepared by combining arc melting and spark plasma sintering methods10.1016/j.jssc.2012.03.069 ↗
27. Influence of PCA on thermoelectric properties and hardness of nanostructured ba–cu–si clathrates10.1016/j.matdes.2015.08.096 ↗
28. Thermoelectric properties of single crystalline Ba8AlxSi46−x clathrate10.1088/1757-899X/18/14/142007 ↗
29. Crystal structure, characterization and thermoelectric properties of the type-I clathrate Ba8−ySryAl14Si32 (0.6≤y≤1.3) prepared by aluminum flux10.1016/j.jssc.2011.02.027 ↗
30. Improvement of thermoelectric performance by optimizing chemical composition in single crystalline Ba8CuxSi46-x clathrate
31. Copper position in type-I Ba8Cu4Si42 clathrate10.1016/j.jssc.2005.03.015 ↗
32. Thermoelectric properties of Ba-Cu-Si clathrates10.1103/PhysRevB.85.165127 ↗
33. Electronic structure and thermoelectric properties of clathrate compounds Ba8AlxGe46-x10.1063/1.2947593 ↗
34. Resistivity due to grain boundaries in pure copper10.1016/0031-9163(65)90776-6 ↗
35. Revisiting Andrews method and grain boundary resistivity from a computational multiscale perspective10.1016/j.mechmat.2024.105115 ↗
36. Electrical-resistivity model for polycrystalline films: the case of arbitrary reflection at external surfaces10.1103/PhysRevB.1.1382 ↗
37. Accounting for the resistivity contribution of grain boundaries in metals: critical analysis of reported experimental and theoretical data for Ni and Cu10.1140/epjp/s13360-021-01303-4 ↗
38. Effect of grain size on the resistivity of polycrystalline 3C-SiC10.1088/1674-4926/25020018 ↗
39. Mott · 1936
40. State of the art in composition, fabrication, characterization, and modeling methods of cement-based thermoelectric materials for low-temperature applications10.1016/j.rser.2020.110361 ↗
41. Thermoelectric properties and stability of nanocomposites type I clathrate Ba-Cu-Si with SiC10.1002/zaac.202000043 ↗
42. Synthesis and thermoelectric properties of p-type Ba8AuxSi46-x clathrate10.1088/1742-6596/379/1/012009 ↗
43. Crystal chemistry and thermoelectric properties of Type-I clathrate Ba8Ni∼3.8SixGe42.2-x (x = 0, 10, 20, 42.2)10.3390/ma11060946 ↗
44. Structural and thermoelectric properties of Cu substituted type I clathrates Ba8CuxSi∼32-xGa∼1410.3390/ma12020237 ↗
45. Thermoelectric properties of Ba8CuxSiyGe46−x−y clathrates synthesized by the Czochralski method10.1021/acsaem.3c02961 ↗
46. Enhancing the thermoelectric performance of Si-Based clathrates via carrier optimization considering finite temperature effects10.1021/acs.chemmater.4c02098 ↗
47. Structural and thermoelectric properties of Ba8CuxSi23-xGe23 (4.5≤ x ≤ 7)10.1007/s11664-011-1897-1 ↗
48. Synthesis and thermoelectric properties of the quaternary type-I Si clathrates K8-δGaxAlySi46-x-y10.1016/j.intermet.2016.11.006 ↗
49. Nanostructured semiconductors for enhanced waste heat-to-electricity conversion