Toughening of ZrB2-based composites with in-situ synthesized ZrC from ZrO2 and graphite precursors
Source abstract
Abstract
ZrB2 matrix composites toughened with in-situ formed ZrC were fabricated by spark plasma sintering (SPS) utilizing ZrB2/ZrO2/graphite powder mixtures at 1900 °C for 7 min under 40 MPa load. Different amounts of graphite nano-flakes (3, 6, and 9 wt%) were added to ZrB2–20 vol% ZrO2 aiming in-situ formation of ZrC reinforcement. Clean ZrB2/ZrC interfaces were observed in the as-sintered microstructure, especially in the composite containing 6 wt% graphite. The reduction of ZrO2 with graphite, which formed ZrC, was progressed over a zirconium oxycarbide (ZrCxOy) intermediate. The hardness of the SPSed ZrB2-based composites was decreased with increasing the graphite content. However, the fracture toughness of the composites showed a reverse trend. By adjusting the graphite content to 6 wt%, excellent control of microstructure could be achieved for the prepared composites with a higher amount of ZrC and lower content of other unfavorable phases. It was finally found that achieving the optimum microstructure of the composite could improve its mechanical performance, and provides a hardness of 17.3 GPa and fracture toughness of 5.0 MPa m1/2.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Characteristics of spark plasma sintered ZrB2-SiC-SCFs composites10.1016/j.ceramint.2018.12.109 ↗
2. Investigating the effect of SPS parameters on densification and fracture toughness of ZrB2-SiC nanocomposite10.1016/j.ceramint.2018.11.169 ↗
3. Densification and flexural strength of ZrB2–30 vol% SiC with different amount of HfB210.1016/j.ijrmhm.2019.104971 ↗
4. Densification behavior involving creep during spark plasma sintering of ZrB2-SiC based ultra-high temperature ceramic composites10.1016/j.ceramint.2019.10.246 ↗
5. Study on the effect of sample shapes on the thermal shock behavior of ZrB 2 -SiC-Graphite sharp leading edge10.1002/ces2.10041 ↗
6. Shock wave-material interaction in ZrB2–SiC based ultra high temperature ceramics for hypersonic applications10.1111/jace.16548 ↗
7. Improved mechanical properties of ZrB2-30 vol% SiC using zirconium carbide additive10.1016/j.ijrmhm.2019.05.004 ↗
8. Highly-efficient preparation of anisotropic ZrB2-SiC powders and dense ceramics with outstanding mechanical properties
9. Electrochemical sensors, a bright future in the fabrication of portable kits in analytical systems
10. Effects of graphite nano-flakes on thermal and microstructural properties of TiB2–SiC composites10.1016/j.ceramint.2020.01.192 ↗
11. Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture10.1016/j.ceramint.2018.02.195 ↗
12. 3D reduced graphene oxide/FeNi3-ionic liquid nanocomposite modified sensor; an electrical synergic effect for development of tert-butylhydroquinone and folic acid sensor10.1016/j.compositesb.2019.05.065 ↗
13. Fabrication, mechanical properties and thermal shock resistance of a ZrB2-graphite ceramic10.1016/j.ijrmhm.2010.12.014 ↗
14. Electron microscopy investigation of spark plasma sintered ZrO2 added ZrB2–SiC composite10.1016/j.ceramint.2020.04.292 ↗
15. Preparation, microstructure and mechanical properties of ZrB2–ZrO2 ceramics10.1016/j.jeurceramsoc.2008.06.033 ↗
16. Microstructure and mechanical properties of ZrB2 -based composites reinforced and toughened by zirconia10.1111/j.1744-7402.2008.02199.x ↗
17. MA-SHS and SPS of ZrB2-ZrC composites10.1016/j.ssi.2004.05.020 ↗
18. Spark plasma sintering of ZrB2–ZrC powder mixtures synthesized by MA-SHS in air10.1007/s10853-006-0719-y ↗
19. Mechanical properties of the low-temperature reactive melt infiltrated ZrB2–ZrC based composites10.1016/j.matlet.2012.03.028 ↗
20. In situ synthesis of ZrB2–ZrCx ceramic tool materials toughened by elongated ZrB2 grains10.1016/j.matdes.2013.01.062 ↗
21. Densification and toughening mechanisms in spark plasma sintered ZrB2-based composites with zirconium and graphite additives10.1016/j.ceramint.2020.02.156 ↗
22. ZrB2-SiC and ZrB2-ZrC ceramics with high secondary phase content10.1111/ijac.12217 ↗
23. A critical evaluation of indentation techniques for measuring fracture toughness: I, direct crack measurements10.1111/j.1151-2916.1981.tb10320.x ↗
24. Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites10.1016/j.msea.2018.01.038 ↗
25. Shrinkage, hardness and fracture toughness of ternary ZrB2–SiC-HfB2 composite with different amount of HfB210.1016/j.matchemphys.2019.05.094 ↗
26. Investigation of strength, fracture toughness, and crack propagation pattern of TaC-based fibrous monoliths as a function of microstructure architecture10.1016/j.ijrmhm.2018.10.013 ↗
27. Fracture toughness and hardness investigation in ZrB2–SiC–ZrC composite10.1016/j.matchemphys.2019.122284 ↗
28. Reactive hot pressing route for dense ZrB2-SiC and ZrB2-SiC-CNT ultra-high temperature ceramics10.1016/j.jeurceramsoc.2020.07.039 ↗
29. The influence of different SiC amounts on the microstructure, densification and mechanical properties of hot-pressed Al 2 O 3 –SiC composites
30. Characterization of TaC-based fibrous-monolithic ceramics made of fibers with different core/shell volume ratios and orientations10.1016/j.msea.2020.138935 ↗
31. Investigation of AlN addition on the microstructure and mechanical properties of TiB2 ceramics10.1016/j.ceramint.2019.05.196 ↗
32. Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure10.1016/j.jallcom.2014.09.006 ↗
33. Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites10.1016/j.ceramint.2017.08.030 ↗
34. A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering10.1016/j.msea.2018.06.008 ↗
35. Role of graphite nano-flakes on the characteristics of ZrB2-based composites reinforced with SiC whiskers10.1016/j.diamond.2020.107786 ↗