Mechanical and fatigue properties of long carbon fiber reinforced plastics at low temperature
Source abstract
Abstract
The mechanical properties of long unidirectional (UD) and crossply (CR) carbon fiber reinforced plastics (CFRPs) were investigated at a low temperature (−196 °C). The CFRPs were fabricated from 60 vol.% carbon fiber and epoxy resin. The bending strength of the UD-CFRP was approximately twice that of the CR-CFRP. The high strength of the UD-CFRP was directly attributed to the amount of carbon fiber oriented along the loading direction: 60% for UD-CFRP compared with 30% for CR-CFRP. The low-temperature (−196 °C) tensile and fatigue strengths of the UD-CFRP were over 1.5 times greater than those at room temperature (20 °C). This was attributed to the increased epoxy strength at low temperatures along with the internal compressive stress arising from the different thermal expansion coefficients of the carbon fiber and epoxy. Both the epoxy strength and internal compressive strength were employed as factors in a compound law to numerically estimate the low-temperature tensile strength. This work presents a systematic analysis for changes in the CFRP material properties at low temperatures.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. The effect of low temperatures on the intermediate and high velocity impact response of CFRPs10.1016/S1359-8368(02)00065-3 ↗
2. Low temperature compressive strength of glass-fiber-reinforced polymer composites10.1115/1.2920146 ↗
3. Prediction of tensile fatigue life for unidirectional CFRP
4. Significance of defects in the fatigue failure of carbon fibre reinforced plastics10.1016/0015-0568(81)90009-9 ↗
5. Mechanical properties and failure characteristics of a recycled CFRP under tensile and cyclic loading10.1016/j.ijfatigue.2013.07.005 ↗
6. Fatigue performance of tension steel plates strengthened with prestressed CFRP laminates10.1061/(ASCE)CC.1943-5614.0000111 ↗
7. Improved mechanical properties of CFRP laminates at elevated temperatures and freeze–thaw cycling10.1016/j.conbuildmat.2011.12.105 ↗
8. Thermal expansion of selected graphite-reinforced polyimide-, epoxy-, and glass-matrix composites10.1007/BF00503228 ↗
9. Thermal expansion of carbon fiber reinforced composites
10. Tensile, compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services
11. Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure bar10.1016/j.compscitech.2004.06.004 ↗
12. Low-temperature behaviour of epoxy-rubber particulate composites10.1007/BF00540323 ↗
13. Residual toughness of poly (acrylonitrile-butadience-styrence) (ABS) after fatigue loading-effect of uniaxial fatigue loading10.1023/B:JMSC.0000035320.91308.15 ↗
14. Damage in CFRPs due to low velocity impact at low temperature10.1016/j.compositesb.2004.04.003 ↗
15. Behavior of CFRP-prestressed concrete beams under high-cycle fatigue at low temperature10.1061/(ASCE)CC.1943-5614.0000190 ↗
16. Performance of CFRP strengthened concrete members under elevated temperatures
17. Experimentally and analyzed property of carbon fiber reinforced thermoplastic and thermoset plates
18. Size effect on tensile strength of carbon fibers10.1016/S0921-5093(97)00454-1 ↗