journal article·2024-12Open access

Preparation and investigation of structural, optical, and dielectric properties of PVA/PVP blend films boosted by MWCNTs/AuNPs for dielectric capacitor applications

Abdu Saeed, Amal Mohsen Alghamdi, Maha Aiiad Alenizi, Reem Alwafi, G.M. Asnag, Eman Alzahrani, Randa A. Althobiti, Ahmed N. Al-Hakimi, Aeshah Salem, S.A. Al-Ghamdi

Abstract

With the rising global energy demands, there is a pressing need for the invention of efficient and reliable energy storage systems. This research centers on the creation and analysis of flexible dielectric capacitors composed of polymer nanocomposites (PNCs), incorporating a blend of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) as the base polymer, with multi-walled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) serving as nanofillers. The AuNPs were produced through an environmentally friendly synthesis method. Films made from PVA/PVP blended with MWCNTs and AuNPs were fabricated using the casting approach. Various characterization methods, including TEM, XRD, FTIR, and UV-Vis spectroscopy, were utilized to evaluate the samples. A detailed analysis of their electrical/dielectric characteristics was conducted. XRD analysis revealed a significant decrease in crystallinity from 55% for the pure PVA/PVP blend to 37% for the 1.6 wt.% nanofiller composite, indicating increased amorphous content, which facilitates better ion mobility. FTIR confirmed strong interactions between the polymer matrix and nanofillers, with intensified vibrational peaks pointing to enhanced molecular dynamics. UV-Vis spectroscopy demonstrated a red shift in the absorption edge, and Tauc's plot analysis showed a reduction in the indirect/direct optical band gap from 4.84 eV/5.68 eV for the pure blend to 4.26/5.35 eV for the nanocomposite with 1.6 wt.% nanofillers. The addition of nanofillers resulted in improvements in their dielectric features, which exhibited a significant performance improvement, with the dielectric constant (ε') reaching approximately 1100 at low frequency for the 1.6 wt.% nanofiller sample, compared to 9 for the pure blend. Additionally, the dielectric loss (ε'') and tangent loss (tan δ) were reduced, with tan δ showing a decrease from 15 for the pure blend to 2 for the 1.6 wt.% nanofiller composite at low frequency, indicating enhanced dielectric efficiency and reduced energy dissipation. The capacitors’ functionality was assessed through capacitance-frequency and conductance-frequency analyses. The capacitors exhibited stable high capacitance across a broad frequency spectrum, making them alternatives for energy storage solutions.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposite Synthesis and Irradiation · Dielectric materials and actuators · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (64)

Show source-provided references
1. Overview of current and future energy storage technologies for electric power applications10.1016/j.rser.2008.09.028 ↗
2. Novel barium titanate based capacitors with high energy density and fast discharge performance10.1039/C7TA05392D ↗
3. F. Han, G. Meng, F. Zhou, L. Song, X. Li, X. Hu, X. Zhu, B. Wu, B. Wei, Dielectric capacitors with three-dimensional nanoscale interdigital electrodes for energy storage, Sci. Adv. 1(9) e1500605. https://doi.org/10.1126/sciadv.1500605.10.1126/sciadv.1500605 ↗
4. Challenges and opportunities of polymer nanodielectrics for capacitive energy storage10.1021/acsami.1c04991 ↗
5. A comprehensive study on structural, optical, electrical, and dielectric properties of PVA-PVP/Ag-TiO2 nanocomposites for dielectric capacitor applications10.1016/j.jallcom.2023.173412 ↗
6. Fabrication and characterizations of nanocomposite flexible films of ZnO and polyvinyl chloride/poly(N-vinyl carbazole) polymers for dielectric capacitors10.1016/j.arabjc.2023.105171 ↗
7. Improving the polyethylene oxide/carboxymethyl cellulose blend's optical and electrical/dielectric performance by incorporating gold quantum dots and copper nanoparticles: nanocomposites for energy storage applications10.1016/j.jmrt.2023.05.073 ↗
8. Incorporated TiO2 nanoparticles into PVC/PMMA polymer blend for enhancing the optical and electrical/dielectric properties: hybrid nanocomposite films for flexible optoelectronic devices10.1002/pen.26476 ↗
9. Modification and development of optical, thermal, dielectric properties and antibacterial activity of PVA/SA blend by Ag/Se nanofillers: nanocomposites for energy storage devices and food packaging applications10.1016/j.polymertesting.2023.108258 ↗
10. Reinforced PEO/Cs polymers blend with Al2O3/TiO2 hybrid nanofillers: nanocomposites for optoelectronics and energy storage10.1016/j.est.2024.111554 ↗
11. The role of TiO2 nanoparticles in enhancing the structural, optical, and electrical properties of PVA/PVP/CMC ternary polymer blend: nanocomposites for capacitive energy storage10.1007/s10971-023-06223-6 ↗
12. High-k dielectric percolative nanocomposites based on multiwalled carbon nanotubes and polyvinyl chloride10.1039/C8TC02528B ↗
13. Structural, optical, and electrical characteristics of HPMC/PVA-I2O5 composites: fabrication and performance analysis for energy storage applications10.1016/j.est.2024.112765 ↗
14. The role of carbon nanotubes on flexural strength and dielectric properties of water sustainable fly ash polymer nanocomposites10.1016/j.physb.2021.413283 ↗
15. Boosting the optical, structural, electrical, and dielectric properties of polystyrene using a hybrid GNP/Cu nanofiller: novel nanocomposites for energy storage applications10.1007/s10854-023-10104-7 ↗
16. Reinforcement of structural, thermal and electrical properties and antibacterial activity of PVA/SA blend filled with hybrid nanoparticles (Ag and TiO2 NPs): nanodielectric for energy storage and food packaging industries10.1016/j.ceramint.2023.03.141 ↗
17. Carbon-based polymer nanocomposites as dielectric energy storage materials10.1088/1361-6528/aaf12c ↗
18. PVA/PVP blend polymer matrix for hosting carriers in facilitated transport membranes: synergistic enhancement of CO2 separation performance10.1016/j.gee.2019.10.001 ↗
19. Silver nanoparticles stabilized by chitosan-polyvinyl alcohol polymers mediated by Pistacia extract for treatment of functional dyspepsia and gastric cancer
20. Ionic liquid (1-ethyl-3-methyltricynomethanide) doped polymer electrolyte (polyvinyl alcohol) for sustainable energy devices
21. Highly dispersible graphene oxide reinforced polypyrrole/polyvinyl alcohol blend nanocomposites with high dielectric constant and low dielectric loss10.1039/C5RA11242G ↗
22. Ibuprofen and acetylsalicylic acid loaded electrospun PVP-dextran nanofiber mats for biomedical applications10.1007/s00289-016-1897-7 ↗
23. Sustainable and cost-effective edge oxidized graphite/PEDOT:PSS nanocomposites with improved electrical conductivity
24. Surfactant-free GO-PLA nanocomposite with honeycomb patterned surface for high power antagonistic bio-triboelectric nanogenerator
25. Single-preparation rGO/Cu–Cu2O nanocomposite-modified electrode integrating NaOH immobilized polymer blend film for one-step nonenzymatic glucose detection
26. Carbon nanotube-reinforced polymer nanocomposites for sustainable biomedical applications: a review
27. Microporous vertically aligned CNT nanocomposites with tunable properties for use in flexible heat sinks
28. Artificial Intelligence prediction and optimization of the mechanical strength of modified Natural Fibre/MWCNT polymer nanocomposite
29. Biosynthesis of silver and gold nanoparticles using Chenopodium album leaf extract10.1016/j.colsurfa.2010.07.020 ↗
30. Effect of nanofillers dispersion in polymer matrices: a review10.1166/sam.2011.1136 ↗
31. Concentration-dependent behaviors of ZnO-reinforced PVA–ZnO nanocomposites as electron transport materials for OLED application10.1007/s00289-017-2186-9 ↗
32. Nanodiamonds as a knife for cutting graphene multilayers into ultrafine pieces under microwave irradiation10.1016/j.flatc.2022.100432 ↗
33. Microwave irradiation for the production of graphene-nanodiamond composite carbon spheres10.1016/j.diamond.2022.109411 ↗
34. Jelen · Melting point of dried gold nanoparticles prepared with ultrasonic spray pyrolysis and lyophilisation · 2023 · 12
35. X-ray studies on the crystallinity of cellulose10.1002/pol.1949.120040203 ↗
36. An Insight into molecular structure and properties of flexible amorphous polymers: a molecular dynamics simulation approach10.1002/app.47457 ↗
37. Charge transport in amorphous organic semiconductors: effects of disorder, carrier density, traps, and scatters10.1002/ijch.201400057 ↗
38. Excellent self-healing and antifogging coatings based on polyvinyl alcohol/hydrolyzed poly(styrene-co-maleic anhydride)10.1007/s10853-018-03279-6 ↗
39. Boosting the optical and electrical properties of PVA/Na-CMC blend by Cr2O3 nanoparticles for photonic and energy storage applications10.1016/j.est.2024.110609 ↗
40. Enhancement of the optical properties of PVP using Zn1-xSnxS for UV-region optical applications10.1007/s00339-020-04157-2 ↗
41. Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity10.1088/1748-3182/3/4/046003 ↗
42. Understanding interfacial influence on properties of polymer nanocomposites
43. Surface plasmon resonance enhanced light absorption and photothermal therapy in the second near-infrared window10.1021/ja508641z ↗
44. Au@Ag core–shell nanocubes for efficient plasmonic light scattering effect in low bandgap organic solar cells10.1021/nn500222q ↗
45. The long-range π-conjugation between electron-rich species and multiwall carbon nanotubes influences the fluorescence lifetime and electromagnetic shielding10.1039/D0NA00444H ↗
46. Reducing the optical band gap of polyvinyl alcohol (PVA) based nanocomposite10.1007/s10854-015-3067-3 ↗
47. Co3O4/NiO nanocomposite as a thermocatalytic and photocatalytic material for the degradation of malachite green dye10.1007/s10854-022-09428-7 ↗
48. Siddaramaiah, Effect of Ce0.5Zr0.5O2 nano fillers on structural and optical behaviors of poly(vinyl alcohol)10.1007/s10854-017-6846-1 ↗
49. Band gap-tunable porous borocarbonitride nanosheets for high energy-density supercapacitors10.1021/acsami.8b02317 ↗
50. Interpretation of AC conductivity of lightly doped conducting polymers in terms of hopping conduction10.1023/B:RUEL.0000019676.99599.bc ↗
51. Superior energy storage performances of polymer nanocomposites via modification of filler/polymer interfaces10.1002/admi.201800096 ↗
52. Nanocomposite polymer electrolytes for lithium batteries10.1038/28818 ↗
53. Effectively improved ionic conductivity of montmorillonite clay nanoplatelets incorporated nanocomposite solid polymer electrolytes for lithium ion-conducting devices10.1007/s42452-018-0119-3 ↗
54. Improvement in dielectric constant of carbon black/epoxy composites with separated structure by surface-modified hollow glass beads with reduced graphene oxide10.1016/j.compscitech.2019.04.003 ↗
55. Effects of amorphous silica nanoparticles and polymer blend compositions on the structural, thermal and dielectric properties of PEO–PMMA blend based polymer nanocomposites10.1007/s10965-018-1510-x ↗
56. Impedance and dielectric studies of nanocomposite polymer electrolyte systems using MMT and ferroelectric fillers10.1007/s11581-016-1784-0 ↗
57. Dielectric breakdown in silica–amorphous polymer nanocomposite films: the role of the polymer matrix10.1021/am4005623 ↗
58. Dielectric, conductivity and ferroelectric properties of lead-free electronic ceramic:0.6Bi(Fe0.98Ga0.02)O3-0.4BaTiO310.1016/j.heliyon.2019.e01654 ↗
59. Resistive–conductive transitions in the time-dependent piezoresponse of PVDF-MWCNT nanocomposites10.1038/pj.2010.44 ↗
60. Dielectric spectroscopy characterization of relaxation process in Ni/epoxy composites10.1016/j.jallcom.2016.05.025 ↗
61. Dielectric relaxation, electrical conductivity measurements, electric modulus and impedance analysis of WO3 nanostructures10.1016/j.jallcom.2021.161490 ↗
62. Frequency and temperature-dependence of dielectric permittivity and electric modulus studies of the solid solution Ca0.85Er0.1Ti1−xCo4x/3O3 (0 ≤ x ≤ 0.1)10.1039/C8RA00794B ↗
63. Studies of dielectric and electrical properties of plasticized polymer nanocomposite electrolytes10.1016/j.matchemphys.2009.01.008 ↗
64. Capacitance–conductance characteristics of Au/Ti/Al2O3/n-GaAs structures with very thin Al2O3 interfacial layer10.1088/2053-1591/2/4/046301 ↗