The superposition of flow stress contributions in a precipitate hardened Ni-based alloy studied by strain rate sensitivity measurements
Source abstract
Abstract
The strain rate sensitivity of the flow stress of underaged, peakaged and overaged samples of the γ′-hardened Ni-based superalloy Inconel X-750 has been measured. The experimental data are presented in the form of Haasen plots, which help to analyze the flow stress superposition rules. It was found that a progressive increase of the slope in the Haasen plot, during Stage II of work hardening, is correlated with the increase in the γ′-precipitate size. The analysis of the results was carried out in the framework of the theory developed by Kocks, Argon and Ashby (Kocks UF, Argon AS, Ashby MF. Prog Mater Sci, 1975;19:1) for two contributions to the flow stress. It was found that the square superposition rule leads to a slight curvature but more important, it predicts an increase of the effective slope in the Haasen plots in agreement with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Kocks UF, Argon AS, Ashby MF. Prog Mater Sci 1975;19:1.10.1016/0079-6425(75)90005-5 ↗
2. Kocks UF. Proceedings of the fifth international conference on the strength of metals and alloys, Vol. 3, Haasen P, Gerold V, Kostorz G, editors. Oxford: Pergamon; 1979, p. 1661.10.1016/B978-1-4832-8412-5.50250-2 ↗
3. del Valle JA, Picasso AC, Alvarez I, Romero R. Scripta Mater 1999;41:237.10.1016/S1359-6462(99)00151-7 ↗
4. Cottrell AH, Stokes RJ. Proc R Soc A 1955;233:17.10.1098/rspa.1955.0243 ↗
5. Diak BJ, Upadhyaya KR, Saimoto S. Prog Mater Sci 1998;43:223.10.1016/S0079-6425(98)00007-3 ↗
6. Basinski ZS. Scripta Metall 1974;4:1301.10.1016/0036-9748(74)90350-0 ↗
7. Basinski ZS, Dislocations in solids, Vol. 4, Nabarro FRN, editor. Amsterdam: North-Holland; 1979, p. 261.
8. Mecking H, Kocks UF. Acta Mater 1981;29:1865.10.1016/0001-6160(81)90112-7 ↗
9. Saimoto S, Sang H. Acta Metall 1983;31:1873.10.1016/0001-6160(83)90133-5 ↗
10. Ardell AJ. Metall Trans A 1985;16A:2131.10.1007/BF02670416 ↗
11. Brown LM, Ham RK, Strengthening methods in crystals, Kelly A, Nicholson RB, editors. London: Applied Science; 1971, p. 9.
12. Brown LM. Proceedings of the fifth international conference on the strength of metals and alloys, Vol. 3, Haasen P, Gerold V, Kostorz G, editors. Oxford: Pergamon; 1979, p. 1551.10.1016/B978-1-4832-8412-5.50245-9 ↗
13. Buttner N, Nembach E. Proceedings of the fourth risø international symposium on metallurgy and materials science, Bilde-Sørensen JB, Hansen N, Horsewell A, Leffers T, Lilhold H, editors. Risø, Roskilde: Risø National Laboratory; 1983, p. 189.
14. Foreman AJE, Makin MJ. Can J Phys 1967;45:511.10.1139/p67-044 ↗
15. Gil Sevillano J. Materials science and technology, vol. 6, Cahn RW, Haasen P, Kramer EK, editors. (Volume editor H. Mughrabi). New York: VCH; 1993, p. 19.
16. Koppenaal TJ, Kuhlmann-Wilsdorf D. Appl Phys Lett 1964;4:59.10.1063/1.1753962 ↗
17. Martin · 1980
18. Ebeling R, Ashby MF. Phil Mag 1966;13:805.10.1080/14786436608212698 ↗
19. Nembach · 1997
20. Starink MJ, Wang P, Sinclair I, Gregson PJ. Acta Mater 1999;47:3855.10.1016/S1359-6454(99)00228-1 ↗
21. Lagerpusch U, Mohles V, Baither D, Anczykowski B, Nembach E. Acta Mater 2000;48:3647.10.1016/S1359-6454(00)00172-5 ↗
22. del Valle JA, Picasso A, Romero R. Acta Metall 1998;46:1981.10.1016/S1359-6454(97)00425-4 ↗
23. Mulford RA. Acta Metall 1979;27:1115.10.1016/0001-6160(79)90129-9 ↗
24. del Valle JA, Romero R, Picasso AC. Mater Sci Eng A 2001;A311:100.10.1016/S0921-5093(01)00933-9 ↗