Study on the influence of thermal insulation material on the flexural performance of precast sandwich panel connected by steel wire mesh
Source abstract
Abstract
Precast concrete sandwich insulation panel system connected by steel wire mesh connector (SWMC) is a type of green energy-saving wall panel, welded into space truss connectors by oblique steel wire and steel wire mesh, embedded in concrete inner and outer wythes, and filled with insulation materials, such as expandable polystyrene (EPS) or rock wool (RW). The effects of oblique steel wire diameter, spacing, and pitch were analyzed by flexural performance tests and ABAQUS finite element numerical simulations to study the flexural performance of SWMC panel with EPS and RW as thermal insulation materials under uniform load. Based on the combination theory of concrete sandwich wallboard proposed by Benayoune.A, the combination degree calculation index of SWMC panels in elastic stage and limit stage were calculated respectively. The results showed that SWMC panels had been experiencing the uncracked stage, the working stage with cracks, and the failure stage during the stress process. The cracks presented a dense distribution in the middle and sparse distribution on both sides. The failure mode of the SWMC sample was flexural, and the flexural ultimate bearing capacity of the EPS samples was relatively high compared to the RW samples. The increase of the diameter of the oblique steel wire in SWMC panel had relatively little influence on the flexural capacity in elastic stage, while the SWMC panel was showing high combination performance. In limit stage, the combination degree of SWMC has decreased to a certain extent and the increasing of spacing and pitch of oblique steel wires have led to the weakening collaborative working ability during the whole loading process. Therefore, in order to fully develop the performance of SWMC in practical engineering, it is recommended that the oblique steel wire spacing need to be designed at 50 mm (no more than 100 mm) and the pitch at 100 mm within the precast concrete SWMC panel.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Cellular and Composite Structures · Masonry and Concrete Structural Analysis · Structural Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shenyang Jianzhu University
China Construction Eighth Engineering Bureau First Construction Co., Ltd., Jinan, China
Funding
General Project of Liaoning Provincial Department of Education under Grant
References (16)
Show source-provided references
1. 10.1016/j.conbuildmat.2006.11.02310.1016/j.conbuildmat.2006.11.023 ↗
2. 10.1016/j.conbuildmat.2005.02.00210.1016/j.conbuildmat.2005.02.002 ↗
3. 10.3390/ma803126410.3390/ma8031264 ↗
4. 10.1016/j.compositesb.2016.04.03010.1016/j.compositesb.2016.04.030 ↗
5. Huanzhi J. Research on the performance of prefabricated concrete sandwich insulation wall panels based on steel fiber composite connections. Nanj: Southeast University, 2019.
6. 10.1016/j.compstruct.2019.11146510.1016/j.compstruct.2019.111465 ↗
7. 10.1016/j.compstruct.2019.01.01910.1016/j.compstruct.2019.01.019 ↗
8. Huang Q, Hamed E, Gilbert RI. Behavior of concrete sandwich panels under eccentric axial compression-testing and finite element analysis. ACI Struct J 2020; 11(3): 235–248.
9. 10.1007/978-981-13-7603-0_1310.1007/978-981-13-7603-0_13 ↗
10. 10.15554/MNL-127-9910.15554/MNL-127-99 ↗
11. American society for testing and materials. Standard test methods for tension testing of metallic materials: ASTM E8/E8M-21. West Conshohocken 2021.
12. American society for testing and materials. Standard guide for selecting jacketing materials for thermal insulation: ASTM-C1423-16.
13. American society for testing and materials. Standard test methods for structural panels in flexure: ASTM-D3043-17.
14. Jianguo N Yuhang W. Comparative study of concrete constitutive model in ABAQUS for simulating static behavior of structures. 2013 30(04):59–67.
15. Nan X, Chao L, Lang Y, et al. Study on the Inclination Angle of Web Members of Truss-Type Connectors in Sandwich Panels. Building Structure 2022; 52(S1): 1159–1164.
16. Chunle G, Tao L. Experimental Study on the Performance of Ribbed Joint Reactive Powder Concrete Sandwich Panels. Construction Machinery 2024; (05): 230–233.