Pressure capacity of sandwich pipe with cement-based core configuration under deep-water external pressure
Source abstract
Abstract
Sandwich pipe, consisting of two steel tubes and a polymeric or cement-based material core layer, has been considered as an attractive solution for oil and gas transporting in deep water. In this paper, the characteristic responses and pressure capacity of sandwich pipes having fiber-reinforced cementitious composites core configuration under external hydrostatic pressure were investigated. The interface adhesion behavior between the fiber-reinforced cementitious composite core and the surrounding steel pipes was modeled based on the inter-layer shear strength test experiments conducted on the sandwich pipe specimens. The parametric studies were carried out to evaluate the influence of geometry parameters and steel grade on the buckling response and ultimate pressure capacity. Furthermore, 768 FE models of sandwich pipes covering a wide range of practical design configurations were rapidly constructed and analyzed using FE software package ABAQUS with the help of programming language Python. Finally, a simplified equation for predicting the pressure capacity of sandwich pipes within the scope of this study was proposed using dimensional analysis combined with singular value decomposition methodology.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Structural Integrity and Reliability Analysis · Geotechnical Engineering and Underground Structures · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Mechanical Engineering, Yangtze University, Jingzhou, China
Funding
Yangtze Fund for Youth Teams of Science and Technology Innovation · Natural Science Foundation of China
References (40)
Show source-provided references
1. 10.1016/S0045-7949(99)00165-010.1016/S0045-7949(99)00165-0 ↗
2. 10.1177/109963621878962210.1177/1099636218789622 ↗
3. Netto TA, Santos JMC, Estefen SF. Sandwich pipes for ultra-deep water. In: Proceeding of IPC 2002 , Calgary, Canada, 29 September–3 October 2002.10.1115/IPC2002-27426 ↗
4. 10.1115/1.194066710.1115/1.1940667 ↗
5. De Souza AR, Netto TA, Pasqualino IP. Materials selection for sandwich pipes under the combined effect of pressure, bending and temperature. In: Proceeding of the 26th international conference on offshore mechanics and arctic engineering 2007 , San Diego, USA, 10–15 June 2007.
6. Pasqualino IP, Lourenco MI, Netto TA. Propagation of buckles in sandwich pipes under external pressure. In: Proceeding of OMAE 2005 , Halkidiki, Greece, 12–17 June 2005.
7. 10.1016/j.oceaneng.2012.07.03310.1016/j.oceaneng.2012.07.033 ↗
8. An C, Castello X, Oliveira AM, et al. Limit strength of new sandwich pipes with strain hardening cementitious composites (SHCC) core: finite element modelling. In: In: ASME 2012 31st international conference on ocean, offshore and arctic engineering , Rio de Janeiro, Brazil, 10–15 June 2012.
9. 10.1016/j.oceaneng.2014.02.02310.1016/j.oceaneng.2014.02.023 ↗
10. Fu GM, Paz CM, Hernández JAC, et al. Sandwich pipes with strain hardening cementitious composites(SHCC).Numerical analysis. In: Proceedings of the ASME 33st international conference on ocean, offshore and arctic engineering 2014 , San Francisco, USA, 8–13 June 2014.10.1115/OMAE2014-23507 ↗
11. 10.1115/1.193451310.1115/1.1934513 ↗
12. 10.1007/s00773-007-0244-y10.1007/s00773-007-0244-y ↗
13. 10.2140/jomms.2010.5.39110.2140/jomms.2010.5.391 ↗
14. 10.1016/j.oceaneng.2016.06.00310.1016/j.oceaneng.2016.06.003 ↗
15. 10.1016/j.ijpvp.2016.09.00610.1016/j.ijpvp.2016.09.006 ↗
16. 10.1016/j.compstruct.2014.11.04810.1016/j.compstruct.2014.11.048 ↗
17. 10.1016/j.compstruct.2015.06.00410.1016/j.compstruct.2015.06.004 ↗
18. Castello X, Estefen SF. Sandwich pipes for ultra deepwater application. In: The offshore technology conference 2008 , Houston, USA, 5–8 May 2008.10.2118/19704-MS ↗
19. 10.1016/j.ijmecsci.2006.09.01510.1016/j.ijmecsci.2006.09.015 ↗
20. 10.1016/j.euromechsol.2016.03.01210.1016/j.euromechsol.2016.03.012 ↗
21. 10.1016/j.marstruc.2016.07.00110.1016/j.marstruc.2016.07.001 ↗
22. 10.1016/j.engstruct.2018.08.03310.1016/j.engstruct.2018.08.033 ↗
23. 10.1016/j.marstruc.2010.12.00110.1016/j.marstruc.2010.12.001 ↗
24. 10.1016/j.oceaneng.2011.06.00610.1016/j.oceaneng.2011.06.006 ↗
25. 10.1016/j.ijpvp.2011.02.00210.1016/j.ijpvp.2011.02.002 ↗
26. 10.1016/j.apor.2015.04.00410.1016/j.apor.2015.04.004 ↗
27. 10.1017/S172771910000391910.1017/S1727719100003919 ↗
28. Babaei H · J Mater Des Appl · 2016 · 234
29. Babaei H · J Process Mech Eng · 2016 · 231
30. 10.1016/j.tws.2016.12.01410.1016/j.tws.2016.12.014 ↗
31. 10.1016/j.tws.2017.04.03110.1016/j.tws.2017.04.031 ↗
32. 10.1007/BF0216302710.1007/BF02163027 ↗
33. 10.1631/jzus.A130010510.1631/jzus.A1300105 ↗
34. 10.1016/j.jcsr.2009.06.01010.1016/j.jcsr.2009.06.010 ↗
35. 10.1016/j.ijadhadh.2007.02.00610.1016/j.ijadhadh.2007.02.006 ↗
36. API specification 5L, specification for line pipe. Washington, DC: API Publishing Services; 2000.
37. GB 50010-2010 · 2015
38. 10.1016/j.finel.2006.06.00410.1016/j.finel.2006.06.004 ↗
39. Liu ZY · J Guangxi Univ Nat Sci Ed · 2012 · 4 · 698
40. 10.1016/j.marstruc.2018.09.00110.1016/j.marstruc.2018.09.001 ↗