Physical recycling of polyimide waste films to improve friction and wear properties of rubber
Source abstract
Abstract
The surge in polyimide (PI) film production has resulted in a significant accumulation of waste films. Thus, exploring rational recycling and reuse strategies for PI waste films is of great significance. In this work, PI waste film was ground into powder via liquid nitrogen pulverization, with a broad particle size distribution (DV10 = 5.692 μm, DV50 = 77.146 μm, DV90 = 376.913 μm) as characterized by a laser particle sizer. Different contents of PI powder (0 phr, 2.5 phr, 5 phr, and 7.5 phr) were blended with natural rubber (NR), followed by hot-press vulcanization to prepare NR/PI composites. The friction and wear properties of the composites were evaluated under room temperature, dry sliding conditions with a 5 N load. Experimental results demonstrated that PI powder derived from waste films not only enhanced the hardness but also reduced the friction coefficient of NR/PI composites. At 7.5 phr, the hardness increased by 5%, and the friction coefficient decreased by 13.83% with enhanced stability. Notably, at 2.5 phr PI content, the composite exhibited optimal PI-NR interfacial bonding, thermal stability, and wear performance: wear mass decreased by 30% and wear volume by 58.3% compared to neat NR.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Synthesis and properties of polymers · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Wuhan University of Technology
Funding
National Natural Science Foundation of China
References (35)
Show source-provided references
1. 10.1016/j.est.2024.11252410.1016/j.est.2024.112524 ↗
2. 10.1016/j.polymertesting.2024.10864710.1016/j.polymertesting.2024.108647 ↗
3. 10.1016/j.polymer.2024.12769410.1016/j.polymer.2024.127694 ↗
4. Zhang Q, Li X, Dong J, et al. Chapter 6: High-performance polyimide fibers. Adv Ind Eng Polym Res 2022; 5: 107–116. https://doi.org/10.1016/j.aiepr.2022.03.004
5. 10.1016/j.cej.2024.15264110.1016/j.cej.2024.152641 ↗
6. 10.1016/j.apsusc.2024.16129310.1016/j.apsusc.2024.161293 ↗
7. 10.1016/j.coco.2024.10211810.1016/j.coco.2024.102118 ↗
8. 10.1016/j.compscitech.2024.11082010.1016/j.compscitech.2024.110820 ↗
9. 10.1016/j.reactfunctpolym.2023.10565210.1016/j.reactfunctpolym.2023.105652 ↗
10. 10.1016/j.micromeso.2024.11340610.1016/j.micromeso.2024.113406 ↗
11. 10.1016/j.conbuildmat.2024.13914510.1016/j.conbuildmat.2024.139145 ↗
12. 10.1016/j.compositesa.2024.10837110.1016/j.compositesa.2024.108371 ↗
13. 10.1016/j.polymer.2024.12775110.1016/j.polymer.2024.127751 ↗
14. 10.1016/j.eurpolymj.2022.11166710.1016/j.eurpolymj.2022.111667 ↗
15. 10.1016/j.coco.2024.10212910.1016/j.coco.2024.102129 ↗
16. 10.1016/j.polymertesting.2022.10789910.1016/j.polymertesting.2022.107899 ↗
17. 10.1016/j.carbon.2023.11810310.1016/j.carbon.2023.118103 ↗
18. 10.1016/j.surfin.2024.10415910.1016/j.surfin.2024.104159 ↗
19. 10.1016/j.apmt.2021.10122610.1016/j.apmt.2021.101226 ↗
20. 10.1016/j.cej.2023.14301710.1016/j.cej.2023.143017 ↗
21. 10.1039/D0NR00725K10.1039/D0NR00725K ↗
22. 10.1016/j.jhazmat.2017.08.01010.1016/j.jhazmat.2017.08.010 ↗
23. 10.1002/app.3796410.1002/app.37964 ↗
24. 10.1002/er.710610.1002/er.7106 ↗
25. 10.1016/j.wear.2022.20439810.1016/j.wear.2022.204398 ↗
26. 10.1021/acs.energyfuels.2c0389610.1021/acs.energyfuels.2c03896 ↗
27. Electric heating behavior of reduced oxide Graphene/Carbon Nanotube/Natural rubber composites with macro-porous structure and segregated filler network (nd). https://www.mdpi.com/2073-4360/12/10/2411 (accessed November 27 2024).10.3390/polym12102411 ↗
28. 10.1016/j.msec.2021.11212610.1016/j.msec.2021.112126 ↗
29. Physico-mechanical properties and automotive fuel resistance of EPDM/ENR blends containing hybrid fillers. J Polym Res (nd). https://doi.org/10.1007/s10965-016-1123-1 (accessed November 27 2024).10.1007/s10965-016-1123-1 ↗
30. 10.1016/j.ijbiomac.2023.12535910.1016/j.ijbiomac.2023.125359 ↗
31. 10.1016/j.wear.2021.20407110.1016/j.wear.2021.204071 ↗
32. 10.1016/j.wear.2010.03.02210.1016/j.wear.2010.03.022 ↗
33. 10.1016/j.wear.2022.20434110.1016/j.wear.2022.204341 ↗
34. 10.1016/j.wear.2024.20567310.1016/j.wear.2024.205673 ↗
35. Bai YY, Du JH. Effect of PTFE on properties of nitrile rubber. China Elastomerics 2024; 34: 72–76. https://doi.org/10.3969/j.issn.1005-3174.2024.02.013