journal article·1992-04

An Analysis of Curvature and Layup Effects on Delamination in Notched Composite Beams

S.J. Harbert, H.A. Hogan

Publisher page

Abstract

Two-dimensional finite element modeling has been used to determine strain energy release rates for delamination cracks in straight and curved notched tensile beams. The notched tensile beam (NTB) is a low-order analog of a cylindrical pressure vessel with an external part-through hole. The material was an S-glass/epoxy fiber rein forced composite material. Specimens were 8 plies thick with notches 2 and 4 plies deep. Uni-directional [0°] 8 and multi-directional [0°,0°, +77°, -77°] 2 layups have been in vestigated. Strain energy release rates were calculated using the virtual crack closure tech nique. The finite element results reveal a mode II dominance similar to the cracked lap shear (CLS) specimen. The effect of curvature was to lower the strain energy release rates slightly (5-13%). Total strain energy release rates were generally higher for the multi- directional layup (by 1½ to 3 times), but the G II /G I ratio may increase or decrease depend ing on the notch depth and the orientation of the plies bounding the delamination.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering Texas A&M University College Station, Texas, 77843-3123

References (11)

Show source-provided references
1. Simons, D.
2. Harbert, S.J.
3. 1989
4. 1989
5. Raju, I.S. · 1987
6. 10.1016/0013-7944(77)90013-310.1016/0013-7944(77)90013-3 ↗
7. 10.1016/0013-7944(87)90220-710.1016/0013-7944(87)90220-7 ↗
8. Hooper, S.J.
9. 10.1520/STP36305S10.1520/STP36305S ↗
10. 10.1520/STP36312S10.1520/STP36312S ↗
11. 10.1177/00219983910250020110.1177/002199839102500201 ↗