journal article·2016-03

Bond mechanism of a new anchorage technique for FRP shear-strengthened T-beams using CFRP rope

Ahmed Godat, Richard Prowt, Omar Chaallal

Publisher page

Abstract

Carbon fiber-reinforced polymer (CFRP) rope was recently developed to anchor fiber-reinforced polymers (FRP) shear-strengthened beams that conventionally uses U-wrap scheme. The rope is a bundle of flexible CFRP strands held together by a thin tissue net. In this technique, holes are drilled through the web at the web-flange intersection, and CFRP ropes are inserted through the holes and flared onto the two free ends of the U-wrap scheme. The technique offers substantial improvements in bond strength and ductility because it converts the U-wrap scheme similar to a full-wrap scheme. The objective of this paper was to investigate the bond behavior of CFRP L-strip plates anchored with CFRP ropes. The experimental program consisted of 16 tests on FRP-to-concrete joints, of which six were unanchored (control specimens) and 10 were anchored by CFRP ropes. The influence of concrete strength, rope length, and plate width on bond behavior was examined. Experimental results showed that the bond performance greatly improved with increasing FRP plate width and rope length, but concrete strength had a negligible effect, which is attributed to high thickness and narrow width of CFRP L-strips used. Theoretical formulations provided to account for the ultimate bond load were compared with the experimental results, and a modification factor to estimate the effect of the presence of CFRP rope was suggested.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Structural Load-Bearing Analysis · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Construction Engineering, Université de Québec, École de Technologie Supérieure, Montreal, Canada

References (37)

Show source-provided references
1. Teng J · 2002
2. 10.1061/(ASCE)CC.1943-5614.000026310.1061/(ASCE)CC.1943-5614.0000263 ↗
3. 10.1061/(ASCE)CC.1943-5614.000027610.1061/(ASCE)CC.1943-5614.0000276 ↗
4. Koutas L · J Compos Construct (ASCE) · 2013 · 24 · 31
5. fib (2001). “Externally bonded reinforcement of R.C. structures: Bulletin 14.” Technical Rep. on the Design and Use of Externally Bonded Fiber-Reinforced Polymer Reinforcement (FRP EBR) for Reinforced Concrete Structures, Féderation international du Béton ( fib ), Lausanne, Switzerland.
6. CAN/CSA-S06. Canadian highway bridge design code . Mississauga, ON: Canadian Standards Association, 2006.
7. Sato Y, Katsumata H and Kobatake Y. Shear strengthening of existing reinforced concrete beams by CFRP sheet. In: Proceedings of the 3rd international symposium on non-metallic (FRP) reinforcement for concrete structures , Japan Concrete Institute, Tokyo, 14-16 October 1997, pp.507–514.
8. 10.1061/(ASCE)1090-0268(2002)6:4(264)10.1061/(ASCE)1090-0268(2002)6:4(264) ↗
9. 10.1177/073168440708737010.1177/0731684407087370 ↗
10. 10.1061/(ASCE)CC.1943-5614.000009110.1061/(ASCE)CC.1943-5614.0000091 ↗
11. 10.1016/S0958-9465(99)00051-710.1016/S0958-9465(99)00051-7 ↗
12. 10.1061/(ASCE)CF.1943-5509.000006710.1061/(ASCE)CF.1943-5509.0000067 ↗
13. Melo G, Araujo A and Nagato Y. Strengthening of RC beams in shear with carbon sheet laminates (CFRP). In: Proceedings of the 6th international symposium on FRP reinforcement for concrete structures ( FRPRCS-6 ), Singapore, 8-10 July 2003, pp.477–486.10.1142/9789812704863_0044 ↗
14. Deniaud C. Behaviour of reinforced concrete beams strengthened in shear with FRP sheets . PhD Thesis, University of Alberta, Edmonton, Alberta, 2000.
15. 10.1016/j.compstruct.2010.07.01210.1016/j.compstruct.2010.07.012 ↗
16. Eshwar N · ACI Mater J · 2008 · 105 · 72
17. 10.1016/j.conbuildmat.2015.06.00510.1016/j.conbuildmat.2015.06.005 ↗
18. 10.1016/j.compstruct.2006.12.01210.1016/j.compstruct.2006.12.012 ↗
19. Mofidi A · J Compos Construct · 2013 · 18 · 8
20. El-Saikaly G, Godat A and Chaallal O. A new anchorage technique for FRP shear-strengthened RC T-beams using CFRP rope. J Compos Construct (ASCE) 2015; 19 (in press).10.1061/(ASCE)CC.1943-5614.0000530 ↗
21. 10.1016/j.compositesb.2007.05.00210.1016/j.compositesb.2007.05.002 ↗
22. 10.1061/(ASCE)CC.1943-5614.000011810.1061/(ASCE)CC.1943-5614.0000118 ↗
23. 10.1061/(ASCE)CC.1943-5614.000006410.1061/(ASCE)CC.1943-5614.0000064 ↗
24. 10.1016/j.compositesb.2011.11.07210.1016/j.compositesb.2011.11.072 ↗
25. 10.1016/j.conbuildmat.2010.11.10010.1016/j.conbuildmat.2010.11.100 ↗
26. 10.1139/cjce-2012-052510.1139/cjce-2012-0525 ↗
27. 10.1016/j.conbuildmat.2015.07.01310.1016/j.conbuildmat.2015.07.013 ↗
28. Seracino R, Raizal Saifulnaz M and Oehlers D. Generic debonding resistance of EB and NSM plate-to-concrete joints. Journal of Composites for Construction 2007; 11(1): 62-70.10.1061/(ASCE)1090-0268(2007)11:1(62) ↗
29. Holzenkämpfer P. Ingenieurmodelle des verbundes geklebter bewehrung für betonbauteile . PhD Thesis, TU Braunschweig (in Germain), 1994.
30. CNR-DT 200 R1/2013. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures . Roma, Italy: Advisory Committee on Technical Recommendations for Construction, 31 October-5 November 2013.
31. Neubauer U and Rostàsy FS. Bond failure of concrete fibre reinforced polymer at inclined cracks – experiments and fracture mechanics model. In: Proceeding of the 4th international conference on fibre reinforced polymer reinforcement for concrete structures , Michigan, USA, 1999, pp.369–382.
32. European Committee for Standardization (CEN) · 2004
33. 10.1061/(ASCE)0733-9445(2001)127:7(784)10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
34. 10.1016/j.compositesb.2004.06.00110.1016/j.compositesb.2004.06.001 ↗
35. 10.1061/(ASCE)1090-0268(2007)11:4(427)10.1061/(ASCE)1090-0268(2007)11:4(427) ↗
36. Alessandri S, Ceroni F, Monti G, et al. Homogenizing the procedures for developing debonding strength capacity models. In: Marques T, et al. (eds) Proceeding of challenges for civil construction ( CCC2008 ), Porto, Portugal, 2008.
37. BS. Design guidance for strengthening concrete structures using fibre composite materials . British Standard Concrete Society. Report no. 55, 2000, Berkshire, UK.