Morphology and properties of poly(styrene-co-acrylonitrile)/poly(methyl methacrylate)/zinc oxide composites
Source abstract
Abstract
The effect of zinc oxide (ZnO) 250 nm on the mechanical, thermal and morphological properties of the composites of poly(styrene-co-acrylonitrile) (SAN), poly(methyl methacrylate) (PMMA) and ZnO was investigated. The Young's modulus of 20SAN/PMMA/ZnO and 40SAN/PMMA/ZnO increased at low ZnO content. Increasing content of ZnO up to 0.5–1.0 wt% increased the impact strength of PMMA/SAN blends and then decreased. The addition of ZnO improved the thermal stability of polymer blends. The dielectric constant of 20SAN/PMMA/ZnO and 40SAN/PMMA/ZnO composites increased with increasing ZnO content. The dispersion of ZnO particles was relatively good and uniform throughout the entire polymer matrix.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Polymer Science and PVC
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Chemical Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom, Thailand
Center of Excellence on Catalysis and Catalytic Reaction Engineering, Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok, Thailand
References (40)
Show source-provided references
1. 10.1002/app.2650510.1002/app.26505 ↗
2. 10.1016/S0032-3861(02)00120-910.1016/S0032-3861(02)00120-9 ↗
3. 10.1016/j.polymertesting.2006.07.01110.1016/j.polymertesting.2006.07.011 ↗
4. 10.1016/j.matlet.2005.10.02010.1016/j.matlet.2005.10.020 ↗
5. 10.1177/073168441246723610.1177/0731684412467236 ↗
6. 10.1016/j.matlet.2004.10.03610.1016/j.matlet.2004.10.036 ↗
7. 10.1016/j.polymer.2003.11.04610.1016/j.polymer.2003.11.046 ↗
8. 10.1016/S0025-5408(02)01055-310.1016/S0025-5408(02)01055-3 ↗
9. 10.1002/polb.1045210.1002/polb.10452 ↗
10. 10.1002/app.2519510.1002/app.25195 ↗
11. 10.1002/pat.67310.1002/pat.673 ↗
12. 10.1016/j.polymer.2005.08.08210.1016/j.polymer.2005.08.082 ↗
13. 10.1016/j.polymertesting.2008.08.01210.1016/j.polymertesting.2008.08.012 ↗
14. 10.1177/073168441143612610.1177/0731684411436126 ↗
15. 10.1002/marc.20050087010.1002/marc.200500870 ↗
16. 10.1016/j.powtec.2005.10.00710.1016/j.powtec.2005.10.007 ↗
17. 10.1016/S0927-7757(02)00044-410.1016/S0927-7757(02)00044-4 ↗
18. 10.1007/s00396-005-1389-z10.1007/s00396-005-1389-z ↗
19. 10.1016/j.polymer.2005.07.07810.1016/j.polymer.2005.07.078 ↗
20. 10.1016/j.polymer.2005.01.06310.1016/j.polymer.2005.01.063 ↗
21. 10.1016/j.polymer.2005.03.04310.1016/j.polymer.2005.03.043 ↗
22. 10.1016/S0043-1648(00)00501-910.1016/S0043-1648(00)00501-9 ↗
23. 10.1002/marc.20040065410.1002/marc.200400654 ↗
24. 10.1016/j.polymer.2008.01.04510.1016/j.polymer.2008.01.045 ↗
25. 10.1016/j.compscitech.2008.03.01210.1016/j.compscitech.2008.03.012 ↗
26. 10.1016/j.polymer.2006.04.00310.1016/j.polymer.2006.04.003 ↗
27. 10.1016/S0032-3861(01)00025-810.1016/S0032-3861(01)00025-8 ↗
28. 10.1016/j.polymer.2004.01.06210.1016/j.polymer.2004.01.062 ↗
29. 10.1016/j.polymer.2004.07.06910.1016/j.polymer.2004.07.069 ↗
30. Lee M · J Appl Polym Sci · 2010 · 117 · 4910.1002/app.31241 ↗
31. 10.1016/S0032-3861(03)00316-110.1016/S0032-3861(03)00316-1 ↗
32. 10.1002/pen.2182510.1002/pen.21825 ↗
33. 10.1002/mame.20100019410.1002/mame.201000194 ↗
34. 10.1002/app.3305710.1002/app.33057 ↗
35. 10.1177/073168441142748410.1177/0731684411427484 ↗
36. Goitisolo I, González I and Eguiazábal JI. Effects of the location of the nanoclay at the interface on the mechanical properties of a maleic anhydride grafted polypropylene/polyamide 6/organoclay co-continuous blend. Polym Adv Technol 2012. DOI: 10.1002/pat.3085.10.1002/pat.3085 ↗
37. 10.1016/j.compositesb.2012.09.01310.1016/j.compositesb.2012.09.013 ↗
38. 10.1016/j.compositesb.2012.10.03310.1016/j.compositesb.2012.10.033 ↗
39. 10.1002/app.2322110.1002/app.23221 ↗
40. 10.1002/app.3392510.1002/app.33925 ↗