The effect of different variables on in-plane radial permeability of natural fiber mats

There has been a vast growth in manufacturing of fiber reinforced plastics by means of liquid composite molding such as resin transfer molding and vacuum-assisted resin transfer molding processes. In these processes, compression of the porous media and pressure of the injected resin result in in-mold forces that need to be determined. Limited information exists regarding the processing parameters and extent of reinforcing potential natural fibers have in polymer matrices. Current study investigates the effect of different variables such as fiber volume fraction, shive content, fiber size, wax content, and resin viscosity on permeability of five different natural fiber mats. Flax fiber with low-, medium-, and high-shive content as well as hemp and kenaf fiber mats was selected for this study and an original experimental device was setup to measure the permeability of the mentioned fiber mats based on different variables. It was found that increasing fiber volume fraction will result in reduction of permeability of all mats. The presence of shive and larger fiber size increased the permeability. Higher wax content lowered the permeability. These competing factors could be used by manufacturers to produce a mat which had optimum permeability while still maintaining acceptable strength.