Spiral fracture in metallic glasses and its correlation with failure criterion
Source abstract
Abstract
We report the observation of spiral fracture of the metallic glass Zr41Ti14Cu12.5Ni10Be22.5 (at.%) subjected to both shear and normal stresses. The spiral angle (that between the spiral line and the loading axis) increases as we gradually change the normal stress from tensile (positive) to compressive (negative). The spiral nature of the fractured surface leads to a left-handed helix fractography pattern in tension, and a right-handed helix in compression. The Mohr Coulomb type of failure is essential for the unique spiral fracture. The use of spiral angles resulted from torsion tension experiments provide another novel experimental strategy to examine the failure criterion as well as stress state dependence of deformation mechanisms which lead to failure in metallic glasses. (C) 2015 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Deformation and fracture of an amorphous metallic alloy at high-pressure10.1007/BF00543690 ↗
2. Mechanical properties of bulk metallic glasses10.1016/j.pmatsci.2010.04.002 ↗
3. Pressure effects on metallic glasses10.1016/j.actamat.2009.10.018 ↗
4. Effects of superimposed hydrostatic pressure on flow and fracture of a Zr–Ti–Ni–Cu–Be bulk amorphous alloy10.1016/S1359-6462(99)00128-1 ↗
5. Deformation and fracture toughness of a bulk amorphous Zr–Ti–Ni–Cu–Be alloy10.1016/S0966-9795(99)00137-5 ↗
6. Effects of hydrostatic pressure on the flow and fracture of a bulk amorphous metal10.1080/01418610208240453 ↗
7. Effects of hydrostatic pressure on mechanical behaviour and deformation processing of materials10.1179/imr.1998.43.4.145 ↗
8. Overview no.144 – mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
9. Bridgman · 1952
10. A yield criterion for Pd40Ni40P20 metallic glass10.1016/0001-6160(89)90228-9 ↗
11. Effects of annealing and specimen geometry on dynamic compression of a Zr-based bulk metallic glass10.1557/jmr.2007.0042 ↗
12. Design of inserts for split-Hopkinson pressure bar testing of low strain-to-failure materials10.1007/s11340-008-9145-1 ↗
13. Pressure-dependent flow behavior of Zr41.2Ti13.8Cu12.5Ni10Be22.5 bulk metallic glass10.1557/JMR.2003.0287 ↗
14. Quasi-static constitutive behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloys10.1016/0956-716X(94)90598-3 ↗
15. Fracture and deformation of bulk metallic glasses and their composites10.1016/j.intermet.2004.05.004 ↗
16. Mode II fracture behavior of a Zr-based bulk metallic glass10.1016/j.jmps.2006.05.003 ↗
17. Increased toughness of zirconium-based bulk metallic glasses tested under mixed mode conditions10.1007/s11661-009-0059-z ↗
18. The Mohr–Coulomb criterion from unit shear processes in metallic glass10.1016/j.intermet.2004.07.001 ↗
19. Yield surface of a simulated metallic glass10.1016/S1359-6454(03)00396-3 ↗
20. Atomistic basis for the plastic yield criterion of metallic glass10.1038/nmat918 ↗
21. Study of mechanical deformation in bulk metallic glass through instrumented indentation10.1016/S1359-6454(01)00263-4 ↗
22. Spherical indentation response of metallic glasses10.1016/j.actamat.2004.03.028 ↗
23. Indentation of bulk metallic glasses: relationships between shear bands observed around the prints and hardness10.1016/j.actamat.2006.12.005 ↗
24. Yielding and intrinsic plasticity of Ti–Zr–Ni–Cu–Be bulk metallic glass10.1016/j.ijplas.2008.11.002 ↗
25. Soil mechanics and plastic analysis for limit design10.1090/qam/48291 ↗
26. A theory for amorphous viscoplastic materials undergoing finite deformations, with application to metallic glasses10.1016/j.jmps.2004.12.006 ↗
27. Interpreting the change in shear band inclination angle in metallic glasses10.1063/1.3050462 ↗
28. Microscopic mechanism for steady-state inhomogeneous flow in metallic glasses10.1016/0001-6160(77)90232-2 ↗
29. The plastic yield and flow behavior in metallic glasses10.1063/1.4907398 ↗
30. Fracture mechanisms in bulk metallic glassy materials10.1103/PhysRevLett.91.045505 ↗
31. Failure criterion for metallic glasses10.1080/14786435.2011.613859 ↗
32. An extended strain energy density failure criterion by differentiating volumetric and distortional deformation10.1016/j.ijsolstr.2012.01.015 ↗
33. The intrinsic and extrinsic factors for brittle-to-ductile transition in bulk metallic glasses10.1016/j.tafmec.2014.06.001 ↗
34. Notch strengthening or weakening governed by transition of shear failure to normal mode fracture10.1038/srep10537 ↗
35. The plastic distortion of metals
36. Strain localization in ductile single-crystals10.1016/0022-5096(77)90001-1 ↗
37. Towards more uniform deformation in metallic glasses: the role of Poisson’s ratio10.1016/j.msea.2012.09.096 ↗
38. Strength, plasticity and brittleness of bulk metallic glasses under compression: statistical and geometric effects10.1080/14786430701762619 ↗
39. High tensile strength reliability in a bulk metallic glass10.1063/1.2838715 ↗
40. Energy dissipation in fracture of bulk metallic glasses via inherent competition between local softening and quasi-cleavage10.1080/14786430701864753 ↗
41. Conditions for the localization of deformation in pressure sensitive dilatant materials10.1016/0022-5096(75)90001-0 ↗
42. Shear band inclination and shear modulus of sand in biaxial tests10.1002/nag.1610040202 ↗
43. Shear-band orientations in plain strain10.1016/0001-6160(82)90236-X ↗