Effect of ply level thickness uncertainty on reliability of laminated composite panels
Source abstract
Abstract
The present study provides a comparative investigation and discussion on the influence of laminate thickness uncertainty on reliability of laminated composite. Laminate thickness uncertainty in three different scenarios is considered: component level thickness uncertainty, fiber-dominated ply level thickness uncertainty and matrix-dominated ply level thickness uncertainty. Monte-Carlo and Markov-chain Monte-Carlo methods are employed to calculate failure probabilities of symmetric and balanced laminate panels bearing uniaxial and multiaxial loads. It is shown that conventional considerations on laminate thickness uncertainty in the component level could underestimate or overestimate the composite failure probability. Ply level thickness uncertainty primarily caused by fiber or matrix quantity may also result in very different failure probabilities. This study highlights the importance of a thorough analysis and classification of the laminate thickness uncertainty in the ply level in order to achieve confident reliability evaluation of composite structures.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Probabilistic and Robust Engineering Design · Mechanical Behavior of Composites · Structural Health Monitoring Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha, China
References (51)
Show source-provided references
1. 10.1016/j.compositesb.2010.05.00510.1016/j.compositesb.2010.05.005 ↗
2. 10.1016/j.compositesa.2013.11.00410.1016/j.compositesa.2013.11.004 ↗
3. 10.1016/j.compositesa.2009.08.02010.1016/j.compositesa.2009.08.020 ↗
4. 10.1016/j.compositesb.2011.10.00710.1016/j.compositesb.2011.10.007 ↗
5. 10.1016/j.compscitech.2007.10.04910.1016/j.compscitech.2007.10.049 ↗
6. 10.1007/978-94-007-5134-7_610.1007/978-94-007-5134-7_6 ↗
7. 10.1061/(ASCE)AS.1943-5525.000048810.1061/(ASCE)AS.1943-5525.0000488 ↗
8. 10.1016/S0951-8320(96)00008-710.1016/S0951-8320(96)00008-7 ↗
9. 10.1016/j.compositesb.2008.01.00410.1016/j.compositesb.2008.01.004 ↗
10. 10.1016/S0263-8223(03)00084-910.1016/S0263-8223(03)00084-9 ↗
11. 10.1016/S0263-8223(97)00079-210.1016/S0263-8223(97)00079-2 ↗
12. 10.1016/S0266-8920(98)00027-710.1016/S0266-8920(98)00027-7 ↗
13. 10.1016/S0045-7949(99)00171-610.1016/S0045-7949(99)00171-6 ↗
14. 10.1016/j.cja.2013.02.01110.1016/j.cja.2013.02.011 ↗
15. 10.1016/S0263-8223(99)00012-410.1016/S0263-8223(99)00012-4 ↗
16. 10.1016/S1359-8368(03)00021-010.1016/S1359-8368(03)00021-0 ↗
17. 10.1680/istbu.1996.2828810.1680/istbu.1996.28288 ↗
18. 10.1016/S0263-8223(98)00085-310.1016/S0263-8223(98)00085-3 ↗
19. 10.1177/073168440504819910.1177/0731684405048199 ↗
20. 10.1016/j.tafmec.2003.11.00510.1016/j.tafmec.2003.11.005 ↗
21. 10.1016/S0266-3538(99)00152-910.1016/S0266-3538(99)00152-9 ↗
22. 10.1016/j.probengmech.2005.07.00710.1016/j.probengmech.2005.07.007 ↗
23. 10.1016/j.compscitech.2005.10.03010.1016/j.compscitech.2005.10.030 ↗
24. 10.1007/s10853-006-0205-610.1007/s10853-006-0205-6 ↗
25. 10.1016/j.ijsolstr.2014.05.01310.1016/j.ijsolstr.2014.05.013 ↗
26. 10.1177/002199831455809810.1177/0021998314558098 ↗
27. 10.1080/15502287.2012.71142810.1080/15502287.2012.711428 ↗
28. 10.1016/j.ress.2010.02.00410.1016/j.ress.2010.02.004 ↗
29. 10.2514/1.3018010.2514/1.30180 ↗
30. 10.1016/S0266-8920(99)00034-X10.1016/S0266-8920(99)00034-X ↗
31. 10.1016/S0263-8223(02)00170-810.1016/S0263-8223(02)00170-8 ↗
32. 10.1016/S0266-3538(01)00154-310.1016/S0266-3538(01)00154-3 ↗
33. 10.1016/j.compscitech.2007.10.05310.1016/j.compscitech.2007.10.053 ↗
34. Brillant M and Hubert P. Modelling and characterization of thickness variation in L-shape out-of-autoclave laminates. In: 18th international conference on composite materials , Jeju, South Korea, 2011.
35. 10.1177/00219980177266184910.1177/002199801772661849 ↗
36. 10.1016/S1359-835X(02)00017-910.1016/S1359-835X(02)00017-9 ↗
37. 10.1155/2012/37216710.1155/2012/372167 ↗
38. 10.1016/j.compositesa.2014.10.01510.1016/j.compositesa.2014.10.015 ↗
39. 10.1016/j.compositesa.2014.11.01910.1016/j.compositesa.2014.11.019 ↗
40. Naito K, Tanaka Y, Yang J, et al. Tensile and flexural properties of single carbon fibres. In: 17th international conference on composite material , Edinburgh, 2009.
41. 10.1016/j.carbon.2006.01.02610.1016/j.carbon.2006.01.026 ↗
42. 10.1016/j.compstruct.2014.11.02910.1016/j.compstruct.2014.11.029 ↗
43. 10.1016/j.polymertesting.2015.12.01510.1016/j.polymertesting.2015.12.015 ↗
44. Valasek P and Chocholous P. Mechanical properties of epoxy resins with organic filler – wood flour. In: Engineering for rural development – international scientific con , Jelgava, 2013.
45. 10.1016/S0020-7683(00)00268-710.1016/S0020-7683(00)00268-7 ↗
46. 10.1002/978047023038110.1002/9780470230381 ↗
47. Daniel IM · 1994
48. Hinton M · 2004
49. 10.1016/S0167-6636(00)00056-910.1016/S0167-6636(00)00056-9 ↗
50. 10.1016/S0142-1123(01)00185-210.1016/S0142-1123(01)00185-2 ↗
51. 10.1016/j.compstruct.2015.06.07010.1016/j.compstruct.2015.06.070 ↗