Influence of accelerated aging on mechanical properties and aging behavior of glass fiber reinforced pipe

In this work, the accelerated aging test of GFRP in two thermal environments was conducted. The accelerated aging test was conducted at a constant temperature of 95°C for periods of 3000h to analyze and study the aging behaviors and mechanism under two environments. Resin defects caused by aging were found in the SEM images, and degradation of the fiber/resin interface was observed. Both the hoop tensile test and uniaxial compression test showed brittle fracture characteristics, and the strength of hydrothermal aging specimens decreased more significantly. Due to matrix degradation, uniaxial compression fracture after hydrothermal aging was observed that the resin exhibited poor adhesion. The decrease in the hardness of the outer resin layer was attributed to the development of the degree of molecular chain breakage. ATR-FTIR results showed that the accelerated aging process is accompanied by changes in the concentration of functional groups. The change in C-H intensity was attributed to the post-curing phenomenon. Accelerated aging resulted in the formation of carboxylic acids or esters and the introduction of hydroxyl groups. Thermogravimetric tests showed that accelerated aging did not change the thermal decomposition temperature of epoxy resins, but caused a decrease in resin content.