journal article·2025-07

Effect of stable-structural 3D woven preform on tensile and flexural properties of carbon fiber/epoxy composites

Zhenyu Ma, Ruidong Man, Zhenhua Yin, Heyi Chen, Dongdong Yin, Yongliang Jiang, Wensuo Ma, Chenhui Jia

Publisher page

Abstract

The geometry of yarns effect the structural stability of 3D woven preform, which influence the mechanical properties of carbon fiber/epoxy composites. To investigate the effect of stable-structural preform on the elastic properties of 3D woven composites, the factors that caused the unstable structure of preform were discussed, and comparative study was conducted. The geometric models of yarn cross-section and preform were established to discuss the stability. The results showed that increasing the opening angle of warp yarns and the elongation of yarn outer contour can improve the stability of preform. The tensile and bending tests of 3DLAC and 3DBAC with stable and unstable structural preform were conducted. The results showed that the tensile and flexural elastic moduli were inversely proportional to the curvature of load-bearing yarns, and the elastic modulus of composites with stable-structural preform can increase by 9%–13%. The redistribution of internal stress in composites was macroscopically manifested as stable changes in experimental process. 3D woven composites with stable-structural preform showed the regular fracture cross-section, and fiber fracture and interface adhesion effect were the main failure mode in tensile tests, and fiber fracture on the compression surface and matrix cracking were the main failure modes in bending tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Mechatronics Engineering, Henan University of Science and Technology, Luoyang, China

Department of Orthopedic, Luoyang Orthopedic Hospital of Henan Province, Luoyang, China

School of Mechatronics Engineering, Zhengzhou Electric Power College, Zhengzhou, China

Funding

Henan Postdoctoral Science Foundation · Key Scientific Research Project of Colleges and Universities in Henan Province

References (36)

Show source-provided references
1. 10.1016/j.compositesa.2021.10672910.1016/j.compositesa.2021.106729 ↗
2. 10.1016/j.jclepro.2020.12108710.1016/j.jclepro.2020.121087 ↗
3. Ma Z, Zhang P, Zhu J. Investigation of the classification and properties of three-dimensional textile fabrics. J Eng Fiber Fabr 2019; 14: 1–11.
4. 10.1177/152808372098410010.1177/1528083720984100 ↗
5. 10.1177/152808372090680410.1177/1528083720906804 ↗
6. 10.1186/s40691-020-00240-710.1186/s40691-020-00240-7 ↗
7. 10.1016/j.compstruct.2020.11260210.1016/j.compstruct.2020.112602 ↗
8. korkmaz M. Modelling and analysisi of the mechanical and forming behaviours of 3D warp interlock carbon woven fabrics according to the structural design parameters. United Kingdom: The Journal of The Textile Institute, 2022.
9. Korkmaz M, Okur A. The review about the numerical modelling and analysis of 3D woven fabrics. United Kingdom: The Journal of The Textile Institute, 2022.
10. 10.1016/j.compscitech.2019.10779310.1016/j.compscitech.2019.107793 ↗
11. 10.1016/j.compstruct.2011.03.01010.1016/j.compstruct.2011.03.010 ↗
12. 10.1080/0040500090274658610.1080/00405000902746586 ↗
13. 10.1016/j.compstruct.2020.11243810.1016/j.compstruct.2020.112438 ↗
14. 10.1016/j.mtcomm.2019.10076910.1016/j.mtcomm.2019.100769 ↗
15. 10.1016/j.compscitech.2019.10782810.1016/j.compscitech.2019.107828 ↗
16. 10.1016/j.cja.2020.09.02710.1016/j.cja.2020.09.027 ↗
17. 10.1177/152808371989438910.1177/1528083719894389 ↗
18. 10.1016/j.compstruct.2018.07.10110.1016/j.compstruct.2018.07.101 ↗
19. 10.1007/s12221-022-3251-z10.1007/s12221-022-3251-z ↗
20. 10.1016/j.compscitech.2018.02.01610.1016/j.compscitech.2018.02.016 ↗
21. 10.1016/j.compositesb.2018.09.03810.1016/j.compositesb.2018.09.038 ↗
22. 10.4028/www.scientific.net/MSF.943.7510.4028/www.scientific.net/MSF.943.75 ↗
23. 10.1177/2633366X1989792110.1177/2633366X19897921 ↗
24. 10.1016/j.compscitech.2015.07.00510.1016/j.compscitech.2015.07.005 ↗
25. 10.1016/j.compositesb.2017.12.06110.1016/j.compositesb.2017.12.061 ↗
26. 10.1016/j.ijsolstr.2016.02.00510.1016/j.ijsolstr.2016.02.005 ↗
27. 10.1002/pc.2722310.1002/pc.27223 ↗
28. Upadhyay R, Sinha S. 3.6 GE-90 and derivative fan blade manufacturing design. Compre Comp Mat 2018; 3: 180–188.
29. 10.1016/j.compstruct.2020.11306710.1016/j.compstruct.2020.113067 ↗
30. 10.1016/j.compstruct.2020.11275610.1016/j.compstruct.2020.112756 ↗
31. 10.1016/j.compositesa.2019.01.00410.1016/j.compositesa.2019.01.004 ↗
32. 10.1007/s12206-021-0231-y10.1007/s12206-021-0231-y ↗
33. 10.1016/j.compstruct.2010.10.01310.1016/j.compstruct.2010.10.013 ↗
34. 10.1177/152808371876080210.1177/1528083718760802 ↗
35. Guo Q, Zhang Y, Guo R, et al. Experimental and numerical study of in-plane shear properties and failure process of multiaxial 3D angle-interlock woven composites. Compos Struct 2021: 261.
36. 10.1016/j.compscitech.2022.10973010.1016/j.compscitech.2022.109730 ↗